What plants is ferrous sulfate suitable for, and what plants and flowers are ferrous sulfate suitabl

Flowers use ferrous sulfate, the more you raise, the worse it gets? It turned out to be the fault of "carelessness".

Camellias, azaleas, and gardenias are suitable for watering ferrous sulfate.

1. Ferrous sulfate can make the soil acidic, so flowers that like acidic soil are suitable for watering ferrous sulfate, such as camellia, rhododendron, gardenia, hydrangea, violet, etc., and can also be used to irrigate flowers and plants with yellow leaf disease due to iron deficiency. Ferrous sulphate is only a supplement and cannot be used as the main fertilizer for irrigation, so it should be diluted before irrigation and should not be poured on the plants.

2. Ferrous sulfate can water hydrangea, because hydrangea can grow on acidic soil or alkaline soil, and its flowers are pink on alkaline soil.

3. Ferrous sulfate is a very commonly used acid fertilizer, which is often used to adjust the pH of the soil when breeding acid-loving flowers, and is also an iron supplement, so ferrous sulfate is not a universal fertilizer, nor can it be used instead of other fertilizers.

Ferrous sulfate is not a panacea, but it is a fertilizer for acid-loving flowers to supplement iron and adjust soil pH, which is used in the cultivation of acid-loving flowers, and is generally used in combination with watering.

1. Gardenias.

Watering gardenias with ferrous sulfate and water in a certain proportion will make the gardenia whiter, larger and more beautiful, and the floral fragrance will be stronger than ever. However, it should be noted that the ferrous sulfate solution should not be poured directly on the plant when watering gardenias, so as not to dilute the aroma of gardenias and reduce the ornamental value of gardenias.

2. Hyacinths.

Hyacinths are acid-loving flowers, and watering them with ferrous sulfate solution can make hyacinths produce more and more beautiful flowers. However, it is best to dilute ferrous sulfate and water before use, and do not bury ferrous sulfate directly in the soil, which will not have the best effect.

3. Violet. Violets are particularly suitable for growing in acidic soils, and ferrous sulphate caters to this habit by adding some ferrous sulphate to the violets when watering them, which can make them grow more vigorously and bloom more brightly.

4. Hydrangea.

Hydrangea is different from other acidic flowers, it does not require much acidity and alkalinity of the soil, it is suitable for growing in acidic soil, and it can also grow well in alkaline soil, but the color of the flowers in the two soils is different.

5. Coleus grass.

When it grows in alkaline soil, its leaves become pale in color, reducing its ornamental value. The addition of ferrous sulphate solution to make the soil acidic, will turn the leaf color of the grass dark red, and will also promote the growth rate of the plant.

Flowers use ferrous sulfate, the more you raise, the worse it gets? It turned out to be the fault of "carelessness".

Rhododendron: Rhododendron is also an acid-loving flower, which improves the acidity and alkalinity of the soil by supplementing ferrous sulfate and lays the foundation for growth. Jasmine:

Jasmine is reasonably supplemented with ferrous sulfate during the growth period, which helps to grow. Milanese flowers: Milanese flowers also need to be supplemented with ferrous sulfate, but the amount should not be too large.

Others: pothos, bamboo, monstera, violets, coleus grass, hyacinth, etc.

Dear, I hope you can be satisfied with my reply, and I look forward to your praise Thank you! I wish you a happy day Question: What is the ratio of carbendazim mixed with potting soil?

When using, it is best to dilute carbendazim in water according to the ratio of 1:50, and then pour the carbendazim solution into the soil and stir well. Note that if the plant is in good growth state, it is not recommended to mix the soil with carbendazim, which may affect the later growth of the plant.

Question: Do I need carbendazim for the soil dug outside?

Camellias, azaleas, and gardenias are suitable for watering ferrous sulfate.

Iron is a necessary substance for the formation of chlorophyll, and if there is a lack of iron, plants cannot better carry out light and action, so many light-loving plants need to be properly supplemented and poured ferrous sulfate in the case of iron deficiency.

1. The role and use of ferrous sulfate:

1. Water treatment.

Ferrous sulphate is used for the flocculation purification of water, as well as for the removal of phosphate from municipal and industrial effluents to prevent eutrophication of water bodies.

2. Reducing agent.

A large amount of ferrous sulfate is used as a reducing agent, mainly to reduce chromate in cement.

3. Medicinal. ferrous sulfate for **iron deficiency anemia; It is also used to add iron to food, and long-term overuse may cause abdominal pain, nausea, etc.

In medicine, it can also be used as a local astringent and blood tonic agent, and can be used for chronic blood loss caused by uterine fibroids.

4. Colorants.

a. The production of iron tannins ink and other inks requires ferrous sulfate. Ferrous sulfate is also found in the mordant used for wood dyeing.

b. Ferrous sulfate can be used to dye concrete into yellow rust color.

c. Woodworking uses ferrous sulfate to dye maple with silver color.

5. Agriculture. Adjust the pH of the soil, promote the formation of chlorophyll (also known as iron fertilizer), and prevent and control yellowing caused by iron deficiency in flowers and trees. It is an indispensable element for acid-loving flowers and trees, especially iron trees. It can also be used as a pesticide in agriculture to prevent and control wheat smut, apple and pear scabs, and fruit tree rot diseases; It can also be used as fertilizer to remove moss and lichen from tree trunks.

6. Analytical chemistry.

Ferrous sulfate can be used as a chromatographic analysis reagent.

2. Laboratory preparation method.

1. It can be directly prepared by reacting iron powder with dilute sulfuric acid. Fe + H2SO4 (rare) = H2 + FeSo4

2. It can be obtained by reacting copper sulfate solution with iron, and the reaction equation is: CuSO4+FE=FeSO4+CU

The effects of ferrous sulfate are as follows:1. Generally, ferrous sulfate contains 19-2 iron, sulfur, and is a good iron fertilizer.

2. Regular use of acid-loving plants can prevent and control the occurrence of yellowing. Because iron is necessary for the formation of plant chlorophyll, when iron is deficient, the formation of chlorophyll is hindered, causing plants to develop green deficiency and the leaves turn yellow. The aqueous solution of ferrous sulfate can directly provide iron that can be absorbed and utilized by plants, and can reduce the alkalinity of the soil.

3. At the same time, ferrous sulfate can also be used as a pesticide to prevent and control wheat smut, apple and pear scabs, and fruit tree rot diseases; It can also be used as fertilizer to remove moss and lichen from tree trunks.

Ferrous sulfate can play a role in neutralizing the soil, for plants that prefer to grow in acidic soil, when the soil is too alkaline, it will affect the normal growth and nutrient absorption of plants, at this time, ferrous sulfate will be used to dilute and water in the soil to change the acidity and alkalinity of the soil.

Suitable plants such as common rhododendrons, camellias, hydrangeas, gardenias, etc., but when using them, you need to know that you can't directly water the roots and branches of plants, and ferrous sulfate is not a fertilizer, and excessive use will be counterproductive.

Ferrous sulfate is suitable for some acidic flowers, such as camellia, gardenia, rhododendron, jasmine, etc. It can also be used for flowers with yellow leaf disease due to iron deficiency. When using, pay special attention to the concentration of dilution, the degree of dilution should not be less than 500 times, not higher than 1000 times.

And it can't be used frequently, just use it once every 20 days. Let's give you a specific introduction.

Ferrous sulfate is an acidic salt, which is acidic when dissolved in water, which can improve the acidity and alkalinity of the soil. Acid-loving flowers like camellias, azaleas, gardenias, and hydrangeas can be appropriately added with some ferrous sulfate.

At this time, if you use an appropriate amount of diluted ferrous sulfate for irrigation, it can play a good role in supplementing iron, but it should be noted that ferrous sulfate is not a compound fertilizer of nitrogen, phosphorus and potassium, and cannot be overused, otherwise it will be counterproductive.

Ferrous sulphate is suitable for sour-loving flowers. For example, jasmine, azalea, camellia, Milanese, etc., they are all flowers that prefer acidic soil, so these flowers need to use ferrous sulfate to promote growth.

Orchid, pothos, succulent, cactus, etc., because these plants need good growing conditions, and also need nutrients, and this nutrient can make it grow better and grow more vigorously, so you should pay attention to giving it more sun in normal times.

Generally, rhododendron, jasmine, gardenia, camellia can be used if it is more suitable for acidic soil. When using it, it is best to go through it with water, so that the concentration is not too high. It will also make them grow well.

Flowers use ferrous sulfate, the more you raise, the worse it gets? It turned out to be the fault of "carelessness".

There are many suitable plants for ferrous sulfate, and the commonly used ones are gardenias, Milanese flowers, azaleas, hydrangeas, violets, coleus grasses, hyacinths, etc. 2.Pay attention to the frequency of use, once a month on the line, if it is too diligent or used for too long, it will affect the growth of the plant.

Plants that are suitable for acid-loving plants.

Ferrous sulphate is a regulator of soil acidity, and some flowers such as Milanan, gardenia, rhododendron and other acid-loving flowers need to be regularly applied to ensure that the soil pH is between.

Ferrous sulphate is a fertilizer. A lot of words will need it. For example, azaleas, gardenias, and so on.

A small amount of ferrous sulphate is added to increase the acidity of the potting soil to meet the needs of plant growth. Flowers suitable for adding ferrous sulfate are: ornamental flowers such as camellia, tea plum, rhododendron, ruixiang, junzi orchid, chrysanthemum, plum blossom, etc.; Foliage.

That is the plants that like acidic soil, such as azaleas, gardenias, orange trees, in fact, most plants in the Jiangnan area like some acidic soil, if you don't have a red blockage at home, you have to do a little bit of this.

Gardenias, Milanese, azaleas, hydrangeas, violets, coleus grass, hyacinths, etc.

Ferrous sulphate is suitable for plants that prefer acidic soil, if these plants grow in alkaline soil, they will lack iron element, in this case, ferrous sulphate can be supplemented, and then these crops can grow normally.