There is an order for the installation of suspended ceilings and cabinets, and what is the order?

When decorating the kitchen, the installation of cabinets and the installation of suspended ceilings often make us have certain doubts. Is it the cabinet or the ceiling first? After seeing so many family decorations, some people installed cabinets first, while others installed ceilings first.

Personally, I think it should be installed with suspended ceilings first, and then cabinets. First of all, it takes time to choose a cabinet, and the design and installation of cabinets are more time-consuming and laborious. And the ceiling should be made first, so that the cabinet can be designed according to the height of the ceiling.

In addition, the decoration time of the integrated ceiling is not long, it is quick and easy, so it will not affect the design of the cabinet.

Secondly, if the cabinet is installed first, then when the ceiling construction personnel operate on the cabinet, it may have a little impact on the cabinet because of some improper operation. For example, if you accidentally drop the machine and hit the top of the cabinet, or a large amount of dust is generated during the ceiling, it is more difficult to clean the surface of the cabinet.

In addition, we need to reserve the position of the range hood pipe before installing and adjusting. Therefore, when installing the ceiling, the ceiling personnel should first understand the location and design plan of the cabinet, so that the opening or position to be left can be reserved in advance to facilitate the subsequent cabinet installation.

Moreover, after the completion of the ceiling and wall and floor tiles, the frame around the kitchen is basically finalized, so there is enough space for cabinet installation, and the time is also very abundant.

When the ceiling is suspended, there are also places that need to be paid attention to, first of all, check whether the level of wood installed on the foot line is good. It needs to be 90 degrees seamless, with no noticeable distortion. You can observe the overall flatness between the gussets and whether the gaps between the gussets are too large.

If there is a problem, then it is necessary to let the construction personnel adjust it in time.

In addition, we can remove a few gussets and check whether the distance between the screws meets the safety standards. Pull a wire draw rod by hand to confirm whether there is any loosening. If the ceiling is patterned, then you need to see if the parquet of the ceiling is correct.

Finally, use your hands to push the electrical body with normal force to see if the electrical appliances will fall off the triangular keel.

In short, the ceiling should be done before decoration, and it is best not to rely on the top of the wall cabinet, so as to avoid sanitary dead ends.

Of course, it is necessary to install the ceiling first, and then install the cabinets, because the ceiling project is more complicated, and it must be carefully installed, and then simple work must be done.

The order is to install the cabinets first and then install the ceiling, so that the cabinets will not be damaged, and the ceiling will not be damaged, and vice versa, the ceiling will be easily damaged.

Install the ceiling first and then install the cabinet, the order must not be messed up, if the cabinet is installed first, the ceiling is not easy to install.

The ceiling must be suspended first, and then the cabinets must be installed, most of the decoration sequence is like this, so that the installation effect is very good, very beautiful.

We should hang the ceiling first and then install the cabinets. Because if you do this, there will be no gaps between the cabinet and the ceiling in the later stage, and there will be no hygienic dead ends.

Basically, every household has a cabinet, but the number of cabinets selected by different families, or the size is different, the choice of cabinets is also a lot of skills, as long as you pay attention to these problems, the choice of cabinets can be said to be really simple, let's talk about how to choose cabinets when home decoration.

Bologni tips the precautions in the selection of cabinets.

1. Size. Kitchen cabinets are generally divided into floor cabinets and hanging cabinets. The height of household cabinets is usually 80-85 cm, which is also designed according to the average height of the Chinese. It is recommended to set the sink 5 cm below the elbow, the height of the operating table 15 cm below the elbow, and the height of the hearth 25 cm below the elbow.

When installing and placing floor cabinets, the unevenness of the wall surface should be taken into account, and the distance between the floor cabinet and the wall should be about 5cm to 6cm.

The height of the hanging cabinet depends on the ceiling height of the kitchen and is usually between 65 cm and 90 cm. If the ceiling of the kitchen is higher than the meter, the height of the hanging cabinet can be chosen as 91 cm.

Range hoods are an indispensable part of the kitchen and should be paid special attention during installation. Installing too high may lead to the loss of some fumes, and high and low levels are not conducive to daily cooking. The suspension distance of a standard range hood for floor cabinets (excluding tabletops) should be 52 cm 62 cm.

2. Material. There are a variety of cabinet materials, each with its own advantages and disadvantages. Stainless steel material is waterproof, insect-proof, high-temperature resistant, and environmentally friendly. It can be reused and has a service life of about 20 years. However, the technical requirements in production are strict.

Wooden cabinets are mainly used for rustic style and Japanese home decoration, which is beautiful overall and has a good visual effect. The disadvantage is that it is easy to mold and rot, and the service life is not long.

Cabinets made of fireproof board are resistant to high temperatures, easy to clean, moisture-proof, and not easy to fade. The disadvantage is that it is impossible to produce three-dimensional effects like bumps and metal.

The most mature cabinet material in the blister board cabinet is scratch resistant, heat resistant, fade resistant, easy to clean and popular in the market.

3. Beautiful. In fact, beauty is present in every part of our lives. After giving us a place to cook, the kitchen can also be as nice as the living room. Use different colors and patterns to create different atmospheres.

If the kitchen area at home is too small, the color of the cabinets should not be too dark, and dark colors can give a sense of visual oppression. The light color will give people a sense of visual extension and make the space more spacious.

The log cabinet gives a natural and fresh feeling, accompanied by melons, fruits, vegetables or flowers, as if you are in an open air.

For the decoration of the kitchen, it is usually the reason why the ceiling is installed first, and then measured by the designer after the ceiling is installed, and then the cabinet is installed after the size is determined.

1. Generally speaking, when making cabinets, hanging cabinets will be made, due to the structure of the cabinet, as long as the ceiling is installed, the height required for the hanging cabinet can be actually measured, which can leave enough space for cabinet installation, so that the later construction is also convenient and worry-free.

2. Compared with the two, the installation of cabinets will be more complicated, and many parts need to be customized in advance. The ceiling is installed in a modular way, so it is relatively quick and easy to install, and it can usually be done in one day.

Therefore, the ceiling is installed first and then the cabinets are installed, which will not affect the progress and construction period of the entire decoration. And there is no need to worry if you encounter problems, because the gusset module with integrated ceiling can be disassembled, which is convenient and quick to operate.

1.The normal is to install the ceiling first, after the ceiling is installed, determine the height of the entire cabinet, our wall cabinet can not lean on the top of the wall cabinet, to avoid sanitary dead ends.

2.If you install the cabinet first and then install the integrated ceiling, there is a lot of garbage in the process of decoration and there is no way to clean up the cabinet.

3.The installation sequence of the ceiling is relatively simple and can be completed in one day.

Therefore, it is generally necessary to install the ceiling first and then install the cabinets.

In the installation of the kitchen first to install the ceiling or first to install such a sequence, the construction sequence is also for the purpose of tiling, so that you can install the kitchen in your own home, there is a feeling of heartbeat.

If it is the opposite to install the cabinet first, it will affect the ceiling when installing the ceiling, it doesn't matter, it will affect the overall effect and the feeling of use.

Therefore, in terms of decoration, we must make a decision according to the actual situation, do not blindly follow the trend, choose a style that belongs to you, decoration is not only a technology but also an art. But it must be carefully considered, and even carefully and carefully installed.

Kitchen cabinets first, then wall cabinets (easy to adjust distance).

Wall cabinet operation process:

1. Process flow: line finding, positioning frame, frame installation, hanging cabinet, partition, fulcrum installation, wall (hanging) cabinet fan installation, hardware installation.

2. Line positioning: Before plastering, the indoor unified elevation line is used to determine the corresponding position according to the height of the hanging cabinet, hanging cabinet elevation and upper and lower mouth height required by the design and construction drawings, considering the relationship between the plastering thickness.

3. Frame and frame installation: The frame and frame of the wall cabinet and wall cabinet should be carried out before indoor plastering, and after being installed in the correct position, 2 nails should be nailed to each fixing piece of the frame on both sides and the wooden bricks of the wall, and the nail cap should not be exposed. If the partition wall is aerated concrete or lightweight partition wall, it should be fixed according to the structure required by the design.

If the design is not required, you can pre-drill a 5mm hole, 70-100mm deep, and pre-embedded wooden wedge in the hole to stick 107 glue cement slurry, and then install the fixed cabinet after the hole is firmly bonded. When the steel cabinet is used, it is necessary to embed the iron parts at the position of the fixed frame of the installation hole to weld the frame. When the frame and frame are fixed, they should be corrected, squared, straightened, and checked for accuracy in elevation, size and position before fixing.

4. Installation of the fulcrum of the partition of the hanging cabinet: the fulcrum of the partition is installed according to the elevation position of the partition in the construction drawing and the fulcrum structure of the requirements. The fulcrum of the wooden partition is generally to nail the fulcrum wooden strips to the wooden bricks of the wall, and the concrete partition is generally a crag-shaped iron piece or an angle steel bracket.

5. Installation of hanging cabinet fan:

1) According to the installation position of the fan to determine the hardware model, the cutting direction of the split fan, generally should be opened to the right fan for the cover fan.

2) Check the size of the frame mouth: the height of the frame mouth should be measured at both ends of the upper mouth; The width of the frame mouth should be three points between the upper, middle and lower frames on both sides, and the corresponding part of the fan should be marked at a fixed point.

3) Carry out the first trimming of the frame fan according to the marking, so that the frame and fan are suitable, try to install and draw the second trimming line, and at the same time draw out the position of the frame and the hinge groove, and pay attention to avoid the upper and lower heads when scribing.

4) Shovel and hinge groove installation hinge: according to the marked hinge position, chisel out the hinge edge line with a flat shovel, and the hinge groove can be removed.

5) Installation: During installation, the hinge should be pressed into the hinge groove of the fan, the fixing screws should be straightened, the depth of the hinge groove should be repaired during trial installation, the gap between the frame and the fan should be adjusted, and each hinge on the frame should be screwed first, and then closed, and the frame and the fan should be checked to be smooth and free of defects, and all the screws should be installed and tightened after meeting the requirements.

Wooden screws should be nailed into the full length of 1 3, screwed into 2 3, such as frame, fan for jacaranda or other hardwood, hinge installation screws should be marked and drilled, the hole diameter is the diameter of the wood screw, the depth of the eye is 2 3 length of the screw.

6) Install the folio fan: first measure the size of the frame and fan, determine the middle counter-seam and cutting depth, and carry out the planing groove after the line, and when the trial installation is suitable, install the left fan first, and then install the cover fan.

6. Hardware installation: the variety, specification and quantity of hardware are installed according to the design requirements, and the selection of the position should be paid attention to when the installation is not specific.

Does the kitchen install cabinetry first, or does it install a suspended ceiling first? The difference is big and you don't know the details.

It must be suspended first, and the cabinets must be installed after the wall tiles are pasted - this is the general procedure for decoration construction. Otherwise, it will not only affect the construction of the ceiling, but also may damage the cabinets, and there will be a lot of dust、、、 when the painter is about to finish, it is not too late to install the cabinets.

Now do cabinets are considered to deal with the gap between the top of the hanging cabinet and the ceiling The overall beauty and money saving is the cabinet first and then the ceiling The disadvantage is that the cabinet will be replaced in the later stage, if the ceiling is first and then the cabinet The top plate (about 15 cm of the gap between the wall cabinet and the ceiling) and the position of the top seam should be glued on the glass glue for a long time, and the glass glue may become black and glued from the new.

Generally, there will be a gap of more than ten centimeters between the cabinet and the ceiling, so that the cabinet can be seen to be bigger without sealing the board, then the ceiling will be suspended first. You can't go wrong from top to bottom. If you do the sealing board will have the problem of hanging the ceiling successively, the advantage of making the cabinet after the ceiling is to avoid the cabinet will be damaged, and the cabinet will not move to the top in the future; In the case of a sealed board, if you install a cabinet and then the ceiling, you can install a few less gussets, the disadvantage is that if you repair the cabinet in the future, the smoke pipe will move to the ceiling, the trouble is bigger, if you don't want to use the sealing plate, there is no gusset inside it, it will be miserable.

When the ceiling is suspended, a few more gussets will not save many meters. Personally, it is recommended to install the ceiling first and then install the cabinet.

First of all, the ceiling, because there is a hanging cabinet to hang the cabinet, the ceiling hanging cabinet is not good, this is the cabinet is very squeamish, especially the paint door panel, a little careless, it is easy to bump.

If the ceiling is suspended first and the cabinet is installed first, it is easy to be damaged.

Of course, the kitchen decoration should be suspended first, and then the cabinets should be installed.

Install the ceiling first, then the cabinets.

1. For the decoration of the kitchen, we usually install the integrated ceiling first, and after the installation of the integrated ceiling, the designer will measure it, and then install the cabinet after the size is determined.

2. Before decoration, there must be a complete drawing plan, and some cabinets need to be installed in the ceiling to open an opening for the range hood pipe, so when installing the ceiling first, it is necessary to let the ceiling construction personnel first look at the design drawings of the scheme, so that they can leave the opening in advance to facilitate the subsequent cabinet installation.

3. The cabinet is a three-point product and a seven-point installation. Obviously, the design and installation of the cabinet is more time-consuming, compared with the integrated ceiling, it should be customized first, and the installation in the ceiling is completed, so that there is a customized cabinet design pattern, and the ceiling installation also has ideas. The simple and convenient decoration of the integrated ceiling requires a short construction period and does not affect the design and installation of the cabinets.

4. If the installation of the cabinet is completed first, the operation of the ceiling construction personnel will inevitably be carried out on the counter surface, which may damage the face, affect the overall appearance of the kitchen decoration effect, and cause unnecessary repair trouble. Moreover, the installation of suspended ceilings is bound to produce a lot of dust, which falls on the surface of the cabinets, making it more difficult to clean.