What is the cause of itchy hands when wearing leather gloves for welding

May be considered for dyshidrotic herpes!

Dyshidrosis usually resolves spontaneously within a few weeks of occurrence, and only a few patients will have repeated episodes throughout the year, leaving chronic eczema or complications of bacterial or fungal infections. However, because of the annoying characteristic of severe itching, how to reduce the pain of patients and reduce the occurrence of complications is the key point.

1. Avoid scratching: scratching is often the main cause of deterioration of the condition and complications, so it is very important to reduce scratching as much as possible, 2. Maintain hands and feet as little as possible with water and detergents, keep feet ventilated and cool, and rub more cream. This not only reduces itching, but also avoids complications such as chronic eczema or fungal infections.

3. Topical steroid ointment: In the case of severe itching, it is quite difficult to reduce the itching sensation by simple maintenance, so it is necessary to use topical steroid ointment to reduce the itching sensation and control the condition.

4. Pressure control: - Pressure control is of great help to alleviate the condition and reduce the disease.

5. Low-metal diet: According to statistics, this method has a high degree of efficacy for patients with metal allergies.

In short, good self-care can reduce the severity and frequency of dyshidrosis rash, but if the itching is more tolerable or the condition continues to worsen, don't forget to seek medical attention as soon as possible.

Yours is more sensitive to electric welding. Don't scratch the itch just yet, it's best to go to the hospital to see. I think it's because the leather gloves are sealed, and they work in high temperatures and sweat. You can have a spare pair and rotate the work. Wash your hands frequently with soap.

There are 2 reasons for this.

1 Your ** itself is sensitive.

2 There is a problem with the material of the gloves.

It is recommended that you go to the clinic first to buy some ointments and potions for use, and then bring ordinary gloves when you bring gloves in the future, and it is best to go to the labor protection store to buy gloves of stable quality out of your own pocket.

If you have allergies, just bring a cloth glove inside.

If your hand is frozen, it will itch whenever you feel the heat.

Itchy hands, you don't have an allergy to hairballs, do you?

1. Choose welding gloves according to your own working environment, for example, welders need thicker and longer welding gloves, which are thick to protect hands from being burned, and long to protect arms from injury.

2. According to their own type of work, for example, argon arc welding is mainly one-handed work, and generally right-handed work, but the gloves of argon arc welding do not need to be too thick, but they need to be long.

3. According to the choice of season, the welding gloves used in summer are not too thick, so that they will feel hot and work is not smooth;

Enterprise (westun) standard:

The length of the manual welding gloves is more than 35cm, and there is a certain insulation performance, and the seams of the gloves cannot be exposed. Heat insulation of more than 100 degrees Celsius, while taking into account dexterity and comfort.

TIG gloves are more than 25cm in length and have certain insulating properties. The leather is soft and the size should be appropriate.

Protective properties: heat insulation, fire retardant, metal slag splash blocking, radiation resistance, insulation, wear resistance, cutting resistance and puncture resistance.

Comfort: The right size, flexible fit, light and sweat-wicking.

Performance: wear-resistant, high tensile force, tear-resistant, high-temperature resistance, reinforced parts, fireproof line.

Material: Material chromium (VI), PCP element does not exceed the standard, pH value is appropriate

When welding, special gloves for welders with a safe voltage of 6000V are required. Ordinary gloves may not be substituted.

Gloves must be dry.

If welding in a humid environment, or if the gloves are wet, there is a possibility of electric shock at the moment of ignition of the arc, resulting in numb hands.

Welding gloves belong to electric welding labor protection products.

Its functions are: 1: to prevent electric shock. During the welding process, the welder's gloves play a role in protecting the welding personnel from electric shock, taking the electrode hand arc welding machine as an example, the no-load voltage is generally between 50V and 90V.

Compared with the 36V AC safety voltage, the no-load voltage of the welding machine is also a dangerous voltage for welding operators. Therefore, welders' gloves must reach a safe withstand voltage of 3000V.

2: Prevent burns. Except for tungsten TIG welding, there is no spatter, and other types of welding have spatter, which may cause burns and burns to the hands and wrists of welding operators.

The welder's gloves are made of suede to effectively isolate the burning and scalding of the welding operator's hands and wrists by welding spatter. In addition, welding arc light is a source of harmful light radiation, and gloves can also effectively isolate harmful light from hand and wrist radiation.

1. Anti-arc burns. 2. Anti-splash scalds. 3. Anti-contact burns.

Itchy hands after wearing disposable gloves indicate **allergies, it is recommended to stop wearing such disposable gloves, and go to the hospital doctor for timely diagnosis and treatment.

Wishing you health and happiness!