How to make the toilet save water, how to make the toilet save water

How to save water in the toilet can be improved from two aspects: reducing the effective volume of the toilet tank and choosing the drainage operation method. The details are as follows:

1. Start with reducing the effective volume of the toilet tank. This is because the design of the toilet tank is mainly based on getting the toilet flushed clean, with little consideration for water conservation. The supporting volume of the water tank is often too large.

Therefore, we should reduce the effective volume of the toilet tank in a variety of ways, such as choosing an energy-saving water tank with a smaller water tank when purchasing, and putting plastic bottles filled with water into the water tank or bricks into the water tank when in use, so as to reduce the effective area of the water tank. This directly reduces the amount of water entering the tank, making the toilet water-saving.

2. Start with the operation method of the water tank. In other words, it is operated separately according to the type and amount of urine and urine. If the amount of urine or stool is small, press the small button or press it to put it down.

Otherwise, press the big button or press it to the end. This will both flush and save water on the toilet.

In short, from reducing the effective volume of the water tank and choosing the appropriate operation method, it is possible to save water in the toilet.

1.Find a plastic bottle, not too big and not too small, just moderate.

2.If the volume of the toilet tank is already small, then we choose a smaller bottle, otherwise it will not be flushed.

3.Then fill it with tap water, preferably full.

4.Open the lid of the toilet tank and handle it gently. Put in a bottle full of water, so that the toilet bowl will have a much smaller amount of water than before, so that the water can be effectively saved, at least 400ml.

The toilet or toilet is a place that everyone comes into contact with every day, and the toilet is the symbol of this place. Flush toilet, I believe everyone has used it, as soon as you press the button on the water tank, the water stored in the toilet tank will flow down for flushing, which is convenient and trouble-free.

But many people may not care, there are two buttons on the toilet tank, one large and one small. Many people press one of the buttons casually after flushing after going to the toilet, and some people even press both at the same time, in fact, it is likely to be a waste of water in doing so. Because the two buttons of the toilet tank control different flush volumes, the large button will release all the water in the tank when pressed.

After pressing the small button, put half of the water. The manufacturer of the toilet is designed so that everyone can choose the button according to the size of the toilet, and in some cases save life.

In addition, the length of time the button is pressed will also affect the amount of flushing, for example, the time of pressing is relatively short, and the water in the tank can only be discharged partially, in this case, the effect of flushing is generally not good, so it is recommended that when you press the button, it is best to stay for a while to ensure that the water in the tank can be flushed down.

Sometimes, the toilet has been used for a long time, and the buttons of the water tank have become less useful. If you press the button but it doesn't bounce back, the toilet will always be flushing, and if it can't be repaired in time, the water tank will keep filling and draining. Therefore, after flushing, we must pay attention to whether the button on the lower tank rebounds, especially those families who often have no one to live in, once this happens, not only pay a lot more water bills, but more importantly, waste a lot of water resources.

There are many details in life, but many people usually don't care about it, and the flushing toilet that they use every day also has tips in it. Even if you don't feel sorry for the water bill, you should think about whether you should do what you can in order to save water resources, and start saving water from the small things in life, what do you say?

Toilet water-saving tips":

Here's how:

Find a plastic bottle, moderate is fine, it is recommended that a 400ml mineral water bottle is good, the height is just right. However, if the volume of your toilet tank is already small, then it is recommended to choose a smaller bottle, otherwise it will not flush clean.

Then fill in tap water, preferably full, and tighten the lid.

3. Open the lid of the toilet tank and handle it gently! Put in a bottle full of water, so that the next time you use it, the water inlet of the toilet will be much smaller than before, so that you can effectively save water, saving at least 400ml.

Close the lid of the toilet tank and flush it!

1 One of the ways to save water in the toilet Choose a water-saving toilet.

The flush siphon toilet is a water-saving toilet with a good water-saving effect at present. When choosing whether the toilet is water-saving, the first thing to make clear is that the "water-saving certification" issued by non-governmental organizations is unreliable and authoritative. Because the state currently does not have compulsory certification for water-saving toilets.

Second, the water consumption of small gears should not be higher than liters. When we buy a toilet, we are usually guided by the introduction of the merchant and pay attention to the water consumption of large stalls, in fact, we should pay attention to the water consumption of small stalls. For water-saving toilets, the water consumption of small stalls is not more than 70% of the water consumption of large stalls.

2. Toilet water-saving method 2 Reduce the amount of water stored in the water tank.

There are a number of ways to reduce the amount of water stored in a tank. If the tank is modified to reduce its capacity, this method will be limited by technical expertise and tools. Another example is to put two bricks in a water tank, if the bricks are hard to find, you can replace them with two Sprite bottles filled with water.

Take a 500ml Sprite bottle as an example, you can save 1 liter of water in one flush, imagine how much toilet water can be saved in a year?

3. Toilet water-saving method 3: Use used wastewater.

Flushing the toilet with used water is the best way to save water. It can achieve the effect of full use of energy. Place a small basin in the sink to receive water for washing your face and hands; The water for the second and third washing of vegetables and washing clothes can be collected in a large bucket and used to flush the toilet, and the annual toilet water saving should not be underestimated.

The inlet valve of the toilet tank can be adjusted to reduce water intake, so that the tank can be filled with less water, and the toilet can save water. You can also put a few water bottles full of water in the toilet tank to occupy the space of the water tank, so that the water tank can fill less water, and it can also save water in the toilet.

If you unplug the refill pipe from the toilet, all the water that enters the toilet will flow into the tank, which can save half of the water.

Secondly, put a few more bottles full of water in the toilet bowl to save water better.

My toilet is very water-efficient. First of all? Put three or four bottles full of mineral water in the tank of water in the toilet. In this way, it is more water-saving.

Method 1: Find a small plastic bottle filled with water, and then gently put it in the toilet tank, so that the water inlet of the toilet bowl will be much smaller, so as to effectively save water. There is no need to worry about not being able to flush clean, because the volume of the water tank is relatively large, and it can be flushed under normal circumstances.

As for some people's suggestion to put bricks, I think it is relatively bad, and it is easy to damage the water parts of the water tank.

Method 2: Bend the float handle in the tank slightly down (don't bend too much), or you can adjust the height of the float by rotating the direction of the float handle, which can reduce the water storage capacity of the toilet tank. This method is also better and simpler than putting a water bottle in the toilet.

The water bottle can also get stuck in the device in the tank, causing the water to flow without stopping, and wasting water.

Method 3: Replace the water-saving toilet or replace the original water tank fitting with a two-stage flush fitting. Generally, we will only replace the toilet when it is old or completely broken, but replacing the water parts of the tank is simple and economical, and it can greatly save water.

You can save water by lowering the floating raft in the toilet tank.

Hello, how to save water in the toilet, first open the toilet cistern, find the float on the water, adjust the float down to the lowest point, you can reduce the amount of water.

You can put a plastic bottle filled with water in the water tank of the toilet, and the water capacity of the bottle can be chosen at will, as long as the height and length of the length do not affect the normal use of the button and the best effect of the toilet cleaning rate.

The drain button, the smaller button often represents a half-flush, and when pressed, only 1 2 or 1 3 of the water in the tank will be discharged. The larger button represents flushing when full of water, and when pressed, it will empty the water in the tank at once, flushing it cleaner.

Reducing the amount of water can be reduced by also placing a full mineral water bottle in the tank.

If you want to save water, you can turn down the pressure at the toilet inlet unit, but it will not flush so cleanly.

How do you save water in a toilet? Well, if you want to save water on the toilet, don't you have two buttons on it? One big button, one small button. If you usually urinate, you can press the small button, which is more water-saving.

The toilet has now become a must-have bath for every family, and the delivery of the toilet is a great invention, which solves the problem of people eating and drinking Lazar. Nowadays, there is a common problem in toilets, that is, flushing toilets is too wastewater. But with the advancement of science and technology, this problem has been gradually solved.

The following is an introduction to what kind of toilet saves water.

1. Toilet water-saving - flushing.

There are two basic types of toilets: flushing and flushing; The siphon type is also divided into two upgraded versions: jet siphon type and vortex siphon type. Although the water-saving effect of the flush toilet is outstanding, the sound of flushing is loud and the odor insulation effect is also very average. The jet siphon toilet will be facing the center of the toilet drain pipe inlet, flushing thoroughly, and grinding Huai combines the advantages of flush and siphon type, and is suitable for families with high requirements for odor and splash prevention effect.

From the toilet class above, we can see that the flush type and the jet siphon type are two types of toilets that are relatively water-saving.

2. Toilet water-saving - flushing structure design.

1. Sewage inlet.

This is one of the secrets of toilet water saving, and it has been tested by professionals that the flared inlet can speed up the flow of water, increase the flushing force, and help the poop slide to the bottom compared to the general inlet.

2. a runner. Runners come in different shapes. Flowways like funnel are designed to use less water to produce more siphon power.

The advantage of the funnel type can enhance the kinetic energy of the flush, and also ensure that the scrubbing water and the jet water can converge to the sewage inlet of the toilet bile bag at the same time.

3. Whether the pipeline is smooth.

Generally speaking, large pipes, pipe arcs, and the smoothness of the inside of the pipes will affect the flushing of the toilet. After calculation, the curvature of the pipe with G3 curvature can reduce the friction of the poop slide and speed up the sliding speed of the poop, so that the momentum of the toilet bowl is stronger.

Third, the toilet is water-saving - pipe glaze.

When buying a toilet, in addition to looking at the glaze on the surface, it is also necessary to look at the glaze of the sewage pipe. For the inferior toilets on the market, the glaze is only applied to the visible part of the surface, and the part of the pipe is easy to be stained and produce peculiar smell.