How to remove the dirt of the toilet bowl, how to remove the water pollution of the toilet bowl

Updated on home 2024-06-19
3 answers
  1. Anonymous users2024-02-12

    1. Clean the toilet.

    Of course, professional products must appear first Toilet cleaner has a good decontamination and descaling effect on ceramic daily necessities, such as toilets and urinals, especially for urine scale and urine alkali.

    2. Bleach cleaning.

    1) You can plug the water outlet hole with a cloth, pour hot water and then dissolve a little chlorine-based bleach.

    2) Let it sit for a while, then brush it with a brush to remove the yellow dirt

    3. Vinegar descaling method.

    The reason why scale will be formed is that the urea solution dissolves and precipitates the formation of alkaline substances, so it is very suitable to use acidic vinegar to remove scale. Pour the mixture of vinegar and water into the toilet bowl and soak it for half a day, and the yellow dirt will be washed off as soon as you brush it.

    4. Baking soda descaling.

    Sprinkle baking soda on the toilet bowl and urinal, brew it with hot boiled water for half an hour, and the dirt will wash off.

    5. Coke cleaning method.

    What should I do if I can't finish the Coke and can't drink it? It is better to use it for descaling and reusing its waste. Pour the remaining cola into the toilet bowl and soak it for about an hour, and the dirt will basically be removed. The principle is that cola contains citric acid, which can eliminate urine scale.

    6. Use shampoo wonderfully.

    Didn't you think of it? Its practical toilet cleaning is more convenient and faster, but some families in order to exercise their children, let them learn to brush the toilet and urinal, and are afraid that cleaning the toilet will hurt the child, it is better to use shampoo to clean the toilet, the method is the same as cleaning the toilet.

  2. Anonymous users2024-02-11

    When modern families decorate the bathroom, most of them like to choose a toilet. If you use it a little longer, you'll notice that the flush toilet at home will accumulate a lot of dirt. So, what's the best way to do it?

    Vinegar descaling: Pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.

    Baking soda descaling: Sprinkle baking soda in the toilet bowl and brew it with hot boiling water for half an hour to brush off the dirt.

    Detergent descaling: You can tie the used nylon socks to one end of the stick, dip them in foaming detergent to scrub them, and wash them once a month to keep the toilet bowl white. Here's how:

    Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it. If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean.

  3. Anonymous users2024-02-10

    Toilet dirt disposal method:

    Disinfectant. Pour a little 84 disinfectant into the toilet bowl where the water is stored. Soak overnight and rinse normally the next day.

    2. Vinegar method.

    Mix the vinegar and water first, stir well, then pour the mixture into the toilet, soak for 4-6 hours, and then wash it.

    3. Sandpaper descaling.

    You can use sandpaper to rub the dirt on the toilet bowl, and remove it with clean water after rubbing.

    4. Baking soda descaling.

    Baking soda heats water to soak the toilet, and the stain removal ability will be stronger. After soaking, remove the dirt and brush it off with a toilet brush.

    5. Bleaching powder descaling.

    Wipe it with a bleach solution first, and then rinse it off with water after a while.

    6. Make a small homemade brush to scrub the toilet.

    The flush toilet produces yellow dirt, which is difficult to clean with a brush, so you can tie the waste nylon socks to one end of the stick, brush them with foaming detergent, and clean them once a month to keep the toilet white.

    7. Detergent descaling.

    a. Now put an appropriate amount of water in the toilet, clean it with a toilet brush, then pour in 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and scrub it.

    b. If the dirt is heavy, you can pour a little more to clean and soak and then brush until it is clean.

    c. Hydrochloric acid is very corrosive, if you clean it with hydrochloric acid, you must pay attention to safety and do not splash it on the top.

Related questions
35 answers2024-06-19

The toilet can't be flushed First of all, you should check whether the water switch is faulty, in fact, check the flush switch, and then carry out targeted repairs.

9 answers2024-06-19

The reasons why a flush toilet leaks are as follows:1. The rubber ball valve is broken: once the rubber ball valve is broken, the sealing of the entire water tank is not good, just like there is a hole in the wooden barrel, so the water will continue to flow out. >>>More

9 answers2024-06-19

Earthworms have "six fears", you can eliminate them according to their weaknesses, I recommend using the third or fourth of the following, convenient and fast. >>>More

22 answers2024-06-19

Usually the inside of the toilet bowl has a gasket seal, in this case, glass glue is applied around the toilet. If the inner sealing ring is broken, and you want to replace the inner sealing ring, use a utility knife, adhesive tape, wrench, glass glue and glass glue gun, and then replace it after removing it and reinstall it.

18 answers2024-06-19

Acidic dissolvers are used to dissolve cat litter. >>>More