What should I do if the toilet can t be flushed, and what should I do if the toilet can t be flushed

The toilet can't be flushed First of all, you should check whether the water switch is faulty, in fact, check the flush switch, and then carry out targeted repairs.

If the toilet can't be flushed, you can find a maintenance worker to repair it, is there a blockage problem?

What should I do if the toilet can't be flushed, immediately dredge it with a hand-cranked toilet dredger, if it can't be loosened, please find a professional dredger.

The toilet bowl does not flush probably. At the bottom of the barrel, close to the outside, there is a small hole one or two centimeters in diameter, and there is an exhaust hole of the toilet. If it is blocked, it will cause poor drainage. Take the wire to unclog this small hole and see if it can be solved.

The toilet can't be flushed, one is that your water is broken, the other is that your water is blocked, you need to repair it, if you can't fix it yourself, you can find a master to repair it.

The toilet does not flush, you can check your water tank to see if there is any water in it. If the toilet pipes are clogged, then it won't flush either.

Go and repair, don't do it yourself, I heard that there was a girl once, and it wasn't on the toilet. As a result, alas, tragedy all.

If the toilet can't be flushed, you can find a property to repair it, and then settle the repair fee.

The toilet can't be flushed, see if the faucet is open, and make sure that it is open or not, so you can only find a maintenance master to repair it.

The toilet bowl does not flush because the internal parts have been damaged, resulting in insufficient water pressure.

If the toilet can't be flushed, find a skilled worker who specializes in repairing the toilet to come and fix it for you, sometimes you can't cope with it.

It depends on what is broken? The biggest reason is that the valve may be broken when it is flushed, and this can be replaced as long as it is replaced, or a professional master can be repaired.

It's good to just change it, and now the toilet is not expensive, more than 300 is OK.

Call **Find someone to repair it, if you don't have the expiration date, you can call the merchant's customer service.

What should I do if the toilet can't be flushed, it's broken, find someone to fix it.

It's better to look for the one that was released. Engineers inspect and repair it to avoid it. Squirt out.

It's very simple, find someone who specializes in unclogging the toilet bowl to get it for you.

If the toilet doesn't flush, it's broken and you need to find someone to fix it.

insufficient water pressure in tap water; Replace the water valve.

Tear it down and take a look. It's really not good, ask the repairman to fix it.

The toilet can't be flushed to block it, so you have to use professional tools to communicate with Mr. Ma.

Is this blocked?

Buy something that runs through the toilet and come back.

If you really can't, you can call it a property.

Hope it helps.

If the toilet doesn't flush, the one in your toilet lid is broken.

The toilet can't be flushed, come and open the lid of the water tank, is it blocked?

Most likely, the toilet is clogged, so it's best if you can get it yourself.

What should I do if the toilet doesn't flush? You can contact the toilet repairer on 58.com for repairs.

What should I do if the toilet is slow and weak and can't be flushed.

Is the water stopped? Is there water in the tank?

First of all, the types of urinals: squatting and sitting.

Squatting is generally used in public toilets, office buildings, office buildings, restaurant toilets and other public places.

The sit-down type is mainly a family toilet.

Let's start with the squat. The main reason why the squatting urinal is a horizontal flush and cannot flush away the poop is that the urinal is dry without water before going to the toilet, the poop is fully bonded to the urinal, and the poop is dry and hard, and it blends into a whole, and it is difficult to flush away when the water pressure is not very large, and it is even impossible to shake the ...... at all

There are two ways to prevent this problem: one is to flush the water before going to the toilet to reduce the adhesion between the poop and the urinal; The second is to estimate the location of the poop and lay a layer of toilet paper underneath.

If you forget to take precautions, or if you fail to prevent them, and you can't get rid of them on your own, then you have to be cautious, otherwise you will ......be wise

Solution: First observe the shape and location of the poop pile, and then put water once to see where the water flows and how much pressure it is. After observation, tear a section of toilet paper and squeeze it vigorously to fix it into strips, as thick as possible.

Put it on both sides of the poop where the water leaks quickly, for the purpose of blocking, to increase the pressure of the water flow on the poop; Then, intermittently flush the toilet. (It should be noted here that there is no need to continuously discharge water, because the most effective flushing is the moment when the water has just been opened, and the water flow at that moment has the greatest force, so it is necessary to release water intermittently, one at a time).

Then say sitting.

The reason why the sitting poop cannot be flushed away is that the poop released at one time is too hard, blocking the small drain of the sitting urinal. When this happens in a sit-down urinal, it is strictly forbidden to drain the water continuously, because the drain is blocked, and the water and poop are not leaky, and if there is too much water, it will overflow the urinal after mixing, and it will ......The consequences are "quite" serious......

Let's talk about the prevention method first: it's very simple, if you feel that your emissions this time are very large, then put water to flush the toilet at the same time as discharge, and flush away part of it first, which will naturally reduce the possibility of poop blockage.

The workaround after it has happened: If it is in your own home, there are many ways. Wipe the pp clean, whatever you want.

If it is at a friend's house, it must be solved within 5 minutes, without making additional sounds, and with limited resources and tools in the toilet, it will be difficult.

In general, there will be a basin in the toilet, gently fill it with water, cover the poop with a layer of toilet paper, raise the basin, and pour the water on the poop. With this hole, when the urinal is flushed again, the hole will slowly disintegrate the stubborn poop. Toilet paper is used to prevent poop from splashing on the outside of the urinal when pouring water.

Answer reason 1: If the toilet is not clogged, but the flush is still weak, it may be caused by insufficient water pressure. In this case, we need to adjust the water level of the tank appropriately. The simple way is to raise the water level by filling a bottle full of water directly in the tank.

2. Or we can also adjust the screw of the inlet valve to increase the water level, but pay attention to a certain distance from the overflow pipe of the drain valve, such as leaving a space of 10 mm. If you still can't solve the problem, it may be that the toilet is not good, and the flush volume itself is insufficient. In fact, if you choose a toilet with better quality, correspondingly, the momentum and sewage discharge capacity will be very strong.

1.Go to a $2 store or grocery store and buy a manual dredge (something that looks like a spring) and dredge it yourself.

2.Dun cloth method: use mopping the floor of the dun cloth.

First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the cloth hard and stuff it into the toilet bowl as much as possible. Finally, lift the cloth as fast as possible, and repeat this action, the contents of the toilet will be sucked out, and the pipe can be unblocked.

3.Find a longer stretch of plastic water pipe, connect one end to the tap water, and plug the other end into the toilet opening, then plug the toilet opening with something like a rag. This method can also solve the clogging problem.

In addition to the fact that the toilet is blocked, it may also be for other reasons, if the water in the toilet cannot be flushed for other reasons, what should I do? If it's blocked, unclog the toilet and flush it down. But if it is because of the pressure of the water tank, you need to adjust the pressure of the water tank.

Open the toilet tank and turn up the pontoon with the water in. Generally, there is a small clip under the water inlet, unplug the clip, rotate the plastic pole into the water, you can raise the pontoon, just card the clip, so that the water level of the water tank is raised, and the pressure of the water tank is increased.

Toilet water can't be flushed?

1. Buy some caustic soda, melt the caustic soda with boiling water, pour it into the toilet, and the toilet will soon be unobstructed after a quarter of an hour. ‍‍

2. Clean the toilet with an appropriate amount of oxalic acid to neutralize the urine alkali and achieve the purpose of making the toilet smooth. ‍‍

3. If the toilet is blocked by a large number of hard objects, it can be stirred with steel wire, which can be bought in hardware stores, and the length varies from 1 meter to 3 meters. Because it can be turned and stretched in to agitate, it is very effective. ‍‍

4. Buy a few pieces of manual dredging, which is very simple, and you can dredge it yourself. Usually, you can use a hand-pressed leather bowl pump to unclog a clogged toilet bowl, which has the title of "Plumber's Friend". Be sure to have enough water in the bucket jar to cover the rubber suction cups, and then pump the pump handle up and down.

If there is not enough water in the bucket tank, do not flush it because flushing a clogged toilet will only cause the water in the bucket tank to overflow. ‍‍

5. Buy a loach or eel and put it in the toilet, pour it in with warm water, the loach or eel will desperately drill down when it is hot, which is very effective for fecal blockage.

Cause: There may be a foreign object blocking the flush pipe, causing poor water flow.

Maybe it's greasy.

Expand. Solution:

1. The oldest kind of cloth-strip mop, after being stained with water, poke it hard in the eyes of the toilet.

2. Use a small basin or something similar, buckle it upside down, press down hard, and wear gloves.

3. Find something like wire to unclog the toilet blockage.

4. Let the professional master overhaul the entire sewer and sewage pipeline, and comprehensively drain the blockage.

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and superspin siphon.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined. With the development of science and technology, many novel varieties have also appeared.

According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet. Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types.

The history of the toilet can be traced back to the Han Dynasty, when the toilet was called Huzi, which was dedicated to the emperor, and legend has it that it was made of jade. It was held by eunuchs who served the emperor at any time. Later, in the Tang Dynasty, because there was a person named Li Hu in the emperor's family, in order to avoid secrecy, he changed the name of Huzi to Beast or Mazi.

After that, in the circulation, it evolved into the name of the toilet.

1.It may be that the main valve is turned off and the water cannot be flushed, so open the valve.

2.It is possible that the piston in the water tank is blocked and the water cannot be flushed, so lift the lid to check whether the water is raised, and find the blockage and remove it with a toothpick.

3.It is possible that the float cannot float freely and cannot be washed out of the water, so you can adjust it by the X on the float.

What happens if the toilet doesn't flush when it's pressed?

First of all, it may be that the toilet drain bend is blocked by a foreign object, resulting in no water; Secondly, it may be that the spring of the water tank button is aging or broken, and the guide fiber returns to the press and does not produce water; In the end, it may be that the float in the tank is damaged and stuck at the water outlet, which will also cause the toilet to fail to drain the water, and it will not come out of the water naturally.

How do you flush an automatic toilet?

The toilet has two kinds of power: automatic flushing or manual flushing. Automatic flushing means that the toilet will automatically flush after the person gets up, and manual flushing means that the person needs to use the remote control or the flush button on the side of the toilet to flush the water after getting up.

1.The structure of the siphon intelligent toilet is that the drainage pipe is shaped, and a certain water level difference will be produced after the drainage pipe is filled with water, and the poop will be discharged by the suction generated by the flushing water in the sewage pipe in the toilet, because the siphon intelligent toilet flushing is not with the help of water flow impulse, so the water surface in the pool is larger, and the flushing noise is smaller. Siphon smart toilets are also divided into two types: vortex siphon and jet siphon.

2.The direct-flush smart toilet is to use the momentum of the water flow to discharge the dirt, the general pool wall is steep, the water storage area is small, so that the hydraulic concentration increases, the water power around the circle increases, and the flushing efficiency is high. Using the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is less, and there is no leakage.

The toilet cannot be flushed normally is one of the problems we often encounter in life, usually we need to find out the problem in time, and carry out corresponding repairs. Here are some of the reasons why your toilet may not flush properly

1.Faulty flush valve. If the toilet flushes but the flow is too low, the flush valve may be faulty. Generally speaking, the aging or wear of the flush valve chip can cause the water flow to become poor.

2.There is a foreign object in the water inlet of the tank. When using the toilet on a daily basis, if a large amount of dirt is flushed into the inside of the tank through the water inlet, it may affect the effect of the next flush. At this point, you need to carefully clean the inside of the toilet bowl to ensure that the inside of the tank is free of any contamination.

3.There is no water in the toilet tank. If the toilet does not have enough water, it will not be able to flush normally, at this time you need to check whether the water level of the water tank is enough to the standard crack and demolition water level, if the water level is insufficient, adding enough water can solve the problem.

4.Punching blockage. Even if there is enough water in the toilet tank, if the flush hole is clogged with foreign or dirt, it will not be possible to flush properly. At this time, a special toilet unclog can be used to solve the problem.

5.The water pipe is faulty. If the toilet bowl does not flush properly, it is possible that the water pipe is faulty. For example, the accumulation of limescale in the drainage pipes, the lack of water due to the blockage of dirt, and the rupture of the water pipes.

When we encounter a situation where we cannot flush properly, we should check and eliminate the problem in time. Usually, the toilet bowl does not flush properly due to problems such as foreign objects at the water inlet of the tank, no water in the tank, clogged flushes, and malfunctioning water pipes. If necessary, you can contact a professional for repair processing.