The left rear wheel fender was hit on the side, how much does it cost to fix it?

300 500 dollars, must be usedPuttyFlatten him and repaint.

Front and rear fenders of automobiles.

Collision is often caused by the car rear-end collision or collision with other fixed objects, and the damage is often due to the strong force, there will be collapse (pits), irregular folds or collapse and folds at the same time, and dead folds and so on.

When repairing, you must try to smooth out the folds. If conditions permit, the folds can be untied by the bracing method, and then flattened; If the conditions are not allowed, it is necessary to disassemble and replace the parts with new ones.

What it does:

Fenders. Also called fenders (named after the shape and position of the parts on the old body resemble bird wings). The fenders are located on the outside of the body of the wheels. The action is based on fluid mechanics.

Reduce the drag coefficient to make the car ride more stable.

According to the installation position, it is divided into front fender and rear fender, the front fender is installed above the front wheel, because the front wheel has a steering function, so it is necessary to ensure the maximum limit space when the front wheel rotates, so the designer will choose according to the tire model.

Dimensions are used to verify the design dimensions of the fenders with "wheel jumps**". The rear fender has no problems with wheel rotation and rubbing, but is aerodynamic.

The rear fender is slightly arched and convex outward.

If the side is knocked and recessed, it will not cost much if it is not particularly powerful, generally 300 500 yuan is enough, and he must be leveled with putty and then repainted.

Three basic essentials of car painting:

1. First primer: fill the sand marks and micropores at the bottom of the workpiece, increase the adhesion of the lower coating, and also have the effect of defect indication. -

2. Primer: Prepare a well-lubricated working surface for the topcoat, complete the last process of all primer work, increase the adhesion of the participating layer and have a certain isolation effect, so as to ensure the quality of the topcoat.

3. Topcoat: Topcoat is divided into single-layer paint and multi-layer paint, which is the color definite layer and the decorative maintenance layer.

Identification method of ordinary paint and clear paint:

Method 1: Visual inspection, the gloss level of transparent paint is deeper than that of ordinary paint.

Method 2: Test, use a damp cloth dipped in a little abrasive on the body to grind a few times in an inconspicuous place, if there is color on the cloth, it is ordinary paint; On the contrary, it is transparent paint. In cases where it is difficult to visually inspect, it is assumed that it is clear lacquer and works according to the procedure for caring for transparent lacquer.

In fact, the appearance of transparent paint has two purposes: one is to increase the brightness and reflectivity of paint; The second is to protect the color paint layer. But it's worth noting:

Due to the advent of clear paint, the thickness of existing base paints is much thinner than before, and some cars have base paint thinner than a thousandth of an inch. The reason is simple: the original color layer is not only an aesthetic layer, but also a protective layer.

With clear lacquer, it only serves an aesthetic role, so there is no need to apply it very thickly.

If it's just a fender, it takes about 500 to add sheet metal and painting, which is different from store to store, for reference only.

This should be able to be sucked out directly, it is recommended to choose a professional car rectification and maintenance organization, this is still relatively simple.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.

Hello, if it is relatively slight in the case of plastic painting** in the case of about three or four hundred, if it is seriously necessary to replace, the cost is high, and the specific ** needs to see what brand of the car.

Hello, this depends on what price you are model, the sheet metal cost below 200,000 yuan varies from about 200 yuan according to the degree of prominence, and the painted fender is 300 yuan per side, and the 4S store will be more expensive.

Hello, generally speaking, the cost of this car repair shop is about 150 yuan, and if it is serious, it is about 200 yuan.

If the fender board is just a dent, then you can go to the outside auto repair shop and get it through sheet metal, which may be about 100 to 200 yuan at most.

Hello If it is not very large, it can be repaired without traces, about 200, and if you want to repair it with sheet metal painting, it depends on the value of the car, not necessarily.

Look at the brand of the car, see if you need to replace the accessories, at least 300 yuan to start.

The front fender is hit, depending on its condition, if the paint surface is worn, directly do painting; If it is deformed, it is necessary to repair the sheet metal and then paint it.

If it is not very large, it can be repaired without traces, about 200, and it needs to be repaired with sheet metal painting, then it depends on the value of the car, not necessarily.

If the paint of the depression has been damaged, people who know how to know it will cause great difficulty for the technician to find a point when repairing, the most important and critical point in the repair of the car depression is to find a point, and the inaccurate point will only make the depression worse and worse, without rich experience in repairing the car, and the technician who has not found a point to the point of being pure is helpless against this depression. The second is to touch up the paint, the paint is also very technical, but it looks very untechnical, many car owners do not repair the paint the more ugly, because they do not understand the skills of the paint, the technician who repairs the paint can repair the damaged paint to 80% of the realm (of course, it can never achieve the effect of spray paint).

The depression is very sharp, and on one of the lines where the paint is peeled, two ridges of nearly 90 degrees have been folded out of the sheet metal due to excessive stress, and it is not easy to repair these two ridges. Moreover, the rim eyebrow ridge of the sheet metal itself has almost disappeared due to excessive stress, so this ridge line must be repaired. The sharper the depression, the higher the requirements for finding the point, and the inaccurate finding of the point will lead to obvious pitting after repair, which is a big challenge for the technician.

The area of the depression is the size of two palms, such a large depression and very sharp, repairing it is not only a long time, but also a test of the technician's patience.

In the process of car depression repair, the first thing to do is to find a good standing position and a good posture, and find a good observation position, which has a double effect on car depression repair. There is a knack for the repair of large depressions, many beginners see that the large depression has no way to start, the master has a lot of experience, as long as the self-stress point of the depression is found, and the force is applied after the identification, the large depression can be leveled out by about 50%, so that the large depression is decomposed and repaired, the large depression is decomposed into several small depressions, and the small depression is then decomposed into more smaller depressions, and finally decomposed into countless points, and each point is repaired point by point.

This depends on the specific situation, if it is a simple concave sheet metal painting, the outside is about 300. If it is serious, it can only be replaced with the fender, so that at least 500 bottoms are required.

Then if your car fender can be repaired, this is in the outside repair shop sheet metal painting, ** in the 600 or so.

If the fender of the car is damaged, his ** aspect will not be very high. Of course, it still depends on the specific model.

Hello, I don't know exactly what kind of vehicle, the extent of damage to the front fenders. If the damage is minor, it can be repaired by sheet metal painting.

This depends on what kind of car it is, the average ordinary car is 100,000 level, and the fender is about 300.

Hello, you can go to the repair shop to check, if it is not serious, the sheet metal is repaired and then painted to solve it, if it is very serious, you can only replace the fender.

Hello car owner, depending on the degree of damage to the fenders, if it is a slight damage, you can repair it with sheet metal painting, **200 or so, if the damage is serious, you need to replace the fenders with a new one, as for **, depending on the model, in general, about 500-600!

Hello, this specific need to look at the damage, if the damage is serious, it needs to be replaced directly.

Hello! The front fender of the car was damaged, and it was replaced with a new one or reshaped, which depends on the actual situation!

It depends on which car you are! If it is a luxury brand replacement or sheet metal cost, it will definitely be high. It is recommended to consult the customer service of the 4S store.

Hello, this depends on the degree of injury, under normal circumstances, it takes about 450, which depends on the degree of injury.

This depends on what model is different models, replacement and maintenance** must be different, you can refer to it.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.