What is the matter with the main unit of the plumbing kang not running

If you install a plumbing kang and the main unit is not operating normally, you need to check the circuit connection of the main machine.

It is usually caused by a problem with the circuit connection, and there is no way to operate normally.

The reason why the plumbing kang host does not run may be caused by a problem with his operating system or his subscription traffic.

The plumbing kang host doesn't need to show what's going on, this must be a fault in the line. It's best to check it out.

Now the pit, the host is not running because of equipment failure, and it can be repaired again.

In this case, it should be a problem with the pump, and in this case, it should be a malfunction.

It is recommended that you choose the surface metal plate of the water heating kang, this product is a complete set of products, there are two parts of the water heating kang controller and the metal water heating kang board, the control principle of the controller on the market is basically the same, the core is the water pump, heater, control circuit; It is recommended to choose the metal surface, because this surface is metal, and the insulation material is a special insulation material for refrigerators. The surface of the coil is aluminum foil, and the insulation material is benzene board.

What exactly happened to the run? He's not simple, do you look at that plug-in? Or if the contact is poor, it will not be operational.

There are many reasons why the plumbing kang host does not run, you can check it first.

No, many times there may be problems, check the operator will.

Summary. The main thing is that the heating pump is not hot, because it is not heated, so the water is not hot and cannot be circulated.

The main thing is that the heating pump is not hot, because it is not heated, so the water is not hot and cannot be circulated.

1. First of all, we need to check whether the pump has a mold failure, because if the plumbing blanket wants to heat successfully, it needs the water circulation pump to continue to work in the first section before it can transfer heat to the plumbing blanket.

2. You can bend the code to check whether the power supply is not plugged in, or the switch is damaged, if the power supply is not available, it is also easy to bury the situation that it is not hot.

3. You can also check whether there is a problem with the simple chain of the host, the plumbing blanket can not be heated normally, if there is a problem with the host, the entire plumbing blanket may be scrapped in the spring.

Do you have any questions?

Have a great day! Good luck! All wishes come true!

Summary. There are several reasons why the plumbing kang is not hot: 1. Gas.

The indoor heating part is not hot because the radiator has gas in the area, which causes the phenomenon of "gas blockage", and it is recommended to vent the radiator. 2. Hydraulic imbalance. Some radiators are not hot, but the hot ones are turned off and the ones that are not hot can be heated up, a phenomenon called hydraulic imbalance of the indoor circulation system.

To deal with this situation, the room system can be adjusted to turn off the hot heater first, let the non-hot heater heat up, and then slowly turn on the hot heater.

Please wait patiently, we are sorting it out, and we will answer it for you immediately, and please don't end the consultation.

Hello pro There are several reasons why the source of the plumbing kang is not hot: 1. Gas. The indoor heating part is not hot because the radiator has gas in the area, which causes the phenomenon of "gas blockage", and it is recommended to vent the radiator.

2. Hydraulic imbalance. Some radiators are not hot, and the hail is closed and the heat is turned off, and the non-hot can be heated, this phenomenon is called the hydraulic imbalance of the indoor circulation system. To deal with this situation, the indoor system can be adjusted, the hot heating is turned off first, the non-hot heating is warmed up, and then the hot heating is turned on slowly.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Kiss! Hello, happy to answer your <>

The hydrophilic heating kang host is not running because there is a fault in the line, the water heating kang host is not hot and not circulating: the plumbing kang is not hot, the most important thing is to add a problem with the virtual heat pump, because the wheel is not heated, so the water is not hot, and there is no way to follow the Tong burning ring 1First of all, we need to check whether the pump is faulty, because if the heating blanket wants to be heated successfully, the water circulation pump needs to work continuously to be able to transfer heat to the heating blanket.

2.You can check whether the power supply is not plugged in properly, or the switch is damaged, if you can't supply power, it is easy to not heat up. 3.

You can also check if there is a problem with the host, the plumbing blanket cannot be heated normally, I hope mine can help you <>

Do you have any other questions?

The reason is that 1. The water pump is faulty, and the plumbing blanket with the pump needs the water and dust trapped circulating pump to work continuously to transfer the heat to the blanket, and the failure of the water pump will cause the water to not circulate, resulting in the heating blanket not being hot. 2. The pipe in the plumbing blanket is not smooth, and there are places that are blocked, resulting in the water not following the school of thought, and the plumbing blanket will not be hot. 3. The power supply is not plugged in or the switch is damaged, and the plumbing blanket does not heat up when the power is not on.

4. The circuit failure of the plumbing blanket.

Dear, hello, I'm glad to answer for you, what is the reason why the plumbing kang is not hot The host beeps the alarm. Troubleshooting: Check whether the host is short of water, the water level of the host should be 1-2cm below the water inlet, and debug after adding water.

We have encountered many cases, the customer reacts to the water leakage at the splint, and returns to the manufacturer for testing by technicians, it is not the internal water leakage of the splint, but the connection tube is too loose, resulting in water seepage. Please pay attention to the debugging. 2. Please try to place the host and the kang body on the same horizontal plane.

The main machine is too high or too low below the kang body, which will cause water seepage at the splint. Please adjust the height of the whole host to the customer, and the problem will be solved. 3. Because the link pipe is a silicone tube, the softness is relatively high, if the host is opened to 65 degrees Celsius for a long time, the splint link will be over-expanded and water seepage outward.

If you encounter the same problem, please do not adjust the main machine to a high temperature for a long time, or use the wire at the interface between the splint and the connecting pipe to secure it by yourself.

Summary. Hello, the plumbing kang is always ringing, first check if there is a lack of water; Secondly, in the case of no shortage of water, you can check whether the water float switch is stuck if it rings all the time; Finally, check again to see if the pump is faulty.

Hello, the plumbing kang always rings and buries the wheel lead, Tongxin first checks whether there is a lack of water; Secondly, in the case of no shortage of water, you can check whether the water float switch is stuck if it rings all the time; Finally, check whether the bend is good or whether the pump is faulty.

The water float switch is in**.

It's possible that it's overloaded, and you ask the console to stop and take a look.

Still won't work. The main machine of the water heating kang is always grinding and grinding, first check whether there is a lack of water; Secondly, in the case of no shortage of water, you can check whether the water float switch is stuck in the seepage bucket by shouting all the time; Finally, check again to see if the pump is faulty.