How to deal with the moldy wall, how to deal with the moldy wall?

There are several ways to deal with mold on the wall:

1. When the mold of the wall is not serious, it can be wiped with a damp cloth or washed, and if it cannot be completely removed, it can also be cleaned with bleach, so that the mildew can be removed.

2. When you can't clean the mold on the wall with clean water, it's best to scrape off the mold on the wall and brush it again.

3. What should I do to prevent the wall from becoming moldy again in the later stage? It is recommended that you still brush a layer of waterproof paint, latex paint, etc. on the wall, so that you can do it once and for all, and then you don't have to worry about this problem in the future!

4. Finally, I remind everyone that in order to prevent the wall from becoming moldy, it is best to recommend that you always ventilate the room and maintain a clean and tidy environment, so that the indoor wall will not mildew, and you don't have to worry about it anymore.

In our daily life, mold on the wall is a relatively common phenomenon, sometimes because of the dampness in the house, so it often leads to water accumulation in the corners, if it is accumulated for a long time, in this case it will cause mold on the wall. Let's introduce to you how to deal with the moldy wall.

1. When the wall has been appealed, you can use a brush to wipe it, and then use a clean cotton ball to dip it in alcohol, and then wipe the wall to keep the wall dry. At the same time, it is also necessary to do regular inspections, and when it is found that it is moldy again, it is also necessary to deal with it in time.

2. When the moldy area is relatively large, you can use a brush to dip a large amount of alcohol at this time, with a concentration of almost 80%, paint the surface of the wall in large quantities, and then dry it, and if you have a hair dryer, you can dry the wall.

3. When most of the wall has become moldy, you can also choose the most convenient way. That is, you can use a mold removal solution mixed with water, and then paint a large area to the entire wall. Then open the window for ventilation, be sure to ensure fast drying.

It can be said that this method is relatively suitable for the case of a lot of mold, after the treatment, paint the wall, this is also to ensure that the humid environment is isolated.

4. In the case of humid and rainy weather, the doors and windows should be closed in time for it, at this time, if you find that there is a damp phenomenon on the wall, then you should immediately wipe it with a dry rag, and then dry it with a hair dryer.

5. When you are clear about the stubborn mildew, first of all, you should use gauze to polish the moldy place, and then use a shovel to shovel off the moldy place, and spray the mixture of solution and water.

Summary: How to deal with the moldy wall is introduced here, you can take the above ways to deal with the moldy situation of the wall, different phenomena use different methods, I hope the above introduction will be helpful to you.

How to deal with the moldy wall, 1. If there is less mold, you can use a dry tooth source dry plum brush to brush off the mold, and then wipe it with a cloth dipped in alcohol; 2. If there are many moldy parts, you can pour bleach into the watering can, then add water to dilute, then spray on the moldy place, then wipe with a rag, wash with water, and finally brush with anti-mildew paint after hail; 3. If the mold is very serious, you can only ask a professional to deal with the mold and then repaint the wall; 4. Pay attention to ventilation and ensure that the humidity of the room is not too large.

1. For simple moldy walls, it is recommended that when the weather is dry, you can use a vacuum cleaner with a brush to suck while brushing, and you must not wipe it with a damp cloth. 2. You can use the household convenient waterproof repair agent to spray it on the gap of the leaking wall and ground, which is very convenient to operate. 3. If the mold is not too serious, you can use a dry toothbrush to brush away the mold stains first, and then use alcohol to scrub the wall.

Pay attention to ventilation when washing, and wear protective gloves, masks and glasses.

Reasons for this problem:

1. The wall insulation is not done well, the temperature difference between indoor and outdoor air is large in winter, and the phenomenon of condensation will generally occur on the wall.

2. Maybe the air in the house is too humid, and the walls slowly start to mold.

3. The wall may be damp due to pipeline leakage, and it will start to mold after a long time.

4. If the wall cracks or the balcony window is not well sealed, the rainwater will soak into the room, which will cause the wall to be damp and moldy.

5. The moldy head of the wall is very ugly, and the moldy wall will emit mold spores, which is very harmful to the human body. Moreover, once the mold spores flow in the air, they can easily enter the human body and invade the respiratory system, and multiply rapidly. Long-term exposure to mold can cause respiratory diseases and allergies, and some people with low immunity may also feel unwell.

1. If there are few moldy places, you can use a dry toothbrush to brush off the mold spots, and then wipe them with a cloth dipped in alcohol. 2. If there are many moldy parts, you can pour bleach into the watering can, then add water to dilute it, spray it on the moldy place and wipe it with a rag, then wash it with water, and finally brush it with anti-mildew paint. 3. If the mold is very serious, it is recommended to ask a professional to deal with the mildew and then repaint the wall.

In order to avoid re-mold, it is important to pay attention to the thorough drying of the wall, the elimination of the causes of mold, and how to properly heat and ventilate. 2. During the humid weather, try to open the windows as little as possible. Then try to make the wall dry, and in humid weather, you can use a dehumidifier, air conditioner, and fan to absorb the moisture on the wall.

As soon as moisture appears on the wall or furniture, it should be wiped off immediately with a dry rag. 3. There are many reasons for the wall mold, the wall is damp, or the putty or paint used in the decoration is not good, which will lead to the mold of the wall, and there are more moldy cases on the wall in winter, in order to prevent the wall from becoming moldy again in the later stage, it is recommended to brush a layer of waterproof paint, latex paint, etc. on the wall, so that it can be done once and for all, and there is no need to worry about this problem in the future.

A better way to deal with moldy walls: If the mold on the wall is not serious, you can first use a brush or dry rag to remove the mold on the wall, and then use alcohol or disinfectant to treat the moldy wall. If the mold is severe, it can be wiped clean with alcohol, and then use bleach powder mixed with water, the ratio is 1:

99. Spray the bleach powder mixed with water on the moldy wall.

Clean and tidy wall, just moved in soon on the spotted, black and yellow, smell and smell a bad smell, this is the wall is mildew. Mold on the wall not only affects the appearance, but also may cause harm to people's health, which must be treated.

Water leak upstairs. Friends who live in the building may encounter leaks in the tap water and heating pipes of the upstairs residents, and even the waterproofing of the bathroom is not done well, the water may leak from the upper floor to the downstairs, resulting in dampness on the roof and the walls connected to the roof, and mildew will become moldy over time.

How to maintain the wall

1. Generally, the friction on the wall is relatively small, mainly dust, water droplets, etc., you can use a rag to wipe off the surface of the floating ash, and regularly use spray wax water for maintenance. Spray wax water can not only clean but also form a transparent protective film on the surface, which is very convenient. If it is the wall of the bathroom, then you need to use alkaline cleaning agent regularly, and be sure to wash it with water after cleaning to prevent the wall surface from losing its luster.

2. The solution to various stains on the wall depends on its specific situation, if it is a waterproof wall, it is good to scrub it directly with a cloth, and it must be blotted dry with a dry towel after cleaning friends; Walls that are not waterproof can be wiped with an eraser. Sun Que.

3. If there is mildew on the wall, you can wipe it with a damp cloth dipped in the bleach used for laundry, and you can also use a wall mold remover.

How to treat moldy walls: Use alcohol or 84 disinfectant to treat moldy walls, use bleaching powder, etc.

1. Use alcohol or 84 disinfectant to treat moldy walls.

Use a brush or a dry rag to remove the mildew on the wall first, and it must be a dry brush or rag, otherwise it will easily lead to more serious mildew on the wall. After brushing the wall with mold stains, wipe the wall with a towel dipped in alcohol or 84 disinfectant.

2. Use bleaching powder.

Use bleach powder to water, the ratio of bleach powder to water is 1:99, and spray the bleach powder mixed with good water on the moldy wall.

What are the causes of moisture in the wall?

There is a large temperature difference between indoor and outdoor. It may be that the wall air insulation is not done well, resulting in a large temperature difference between indoor and outdoor, and the water vapor in the indoor air is pre-condensed to the infiltration wall, which will lead to the dampness of the wall for more than a time. It is not certain if it is due to the quality of wall insulation.

There is a very simple inspection method, you can try it at home: use the inspection hammer to tap the wall, listen to the sound, if the sound is dull, it means that the wall is not well insulated; Conversely, if the sound is hollow, it means that the wall is insulated. Of course, the poor selection of insulation materials will also cause the wall to be damp, then it depends on whether there are cracks in the wall, if there are cracks, you can consider replacing the insulation materials.

The treatment of moldy walls is as follows:1. Use alcohol or 84 disinfectant to treat the moldy wall, if the mold on the wall is not serious, first use a brush or a dry rag to remove the mold on the wall, it must be a dry brush or rag, otherwise it is easy to cause more serious mold on the wall. Once you have brushed the mold on the wall, wipe the wall with a towel dipped in alcohol.

2. Use bleaching powder, if there are more mildew, you can wipe it clean with alcohol, and then use bleaching powder with water, the ratio of bleaching powder to water is 1:99, and spray the bleach powder mixed with good water on the moldy wall.

3. Do a good job of waterproof and moisture-proof on the wall, our wall mildew is because the wall at home is not waterproof and moisture-proof, or the wall has water seepage, so we can paint a layer of waterproof paint on the wall after cleaning up the mildew on the wall, so that we can prevent the wall from becoming moldy again. In addition, we should always open windows in our homes for ventilation.