What should I do if the wall is moldy and the wall skin falls off? Any good suggestions?

Many people think that the wall has mold, wipe off the mold with a rag or repaint the wall can be solved, in fact, this is a very wrong idea, this can only be temporarily eliminated or covered, can not be completely eliminated, invisible to the naked eye is not equal to **, after a period of time mold will appear again, and more and more serious.

Solution: 1. Use dehumidifiers. The room is damp, and desiccant and activated carbon can be used to prevent moisture and absorb moisture. Desiccants and activated carbon can be used. There are many desiccants in supermarkets that are specially used for moisture-proof and dehumidification, and the common ones are two types: moisture absorption boxes and dehumidification bags.

2. Buy an air dehumidifier, it is like a vacuum cleaner, it can concentrate the wet air together, and when the moisture is wet, it will turn into water many times. Dehumidify with air conditioning. Air conditioners used in the home generally have the function of dehumidification, but the way of adjusting the humidity of the indoor air is slower, generally takes two or three hours, and it will make the people in the room feel cold.

3. Use lime and bamboo charcoal to dehumidify. Use a small cloth bag to fill an appropriate amount of lime, tie it into a bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor damp situation, at the same time, the lime also has a disinfection effect, killing two birds with one stone.

4. When the outside moisture is heavy, the doors and windows should be closed to prevent moisture and moisture. In normal times, windows should be opened more for ventilation.

When the wall is moldy and the wall skin falls off, you can remove the damaged parts, and then re-brush the putty and apply the paint. But if you don't want to go through the hassle, you can also put decorative wall stickers on the damaged area, although it will look obtrusive.

In general, we still have to do a good job of grassroots treatment when decorating, if the wall peeling is more serious, it is best to ask a professional painting service to repair the wall. I suggest you can go to see Dulux's renovation service, our family has found Dulux's renovation service because of wall damage before, the whole process is very professional, there will be someone to diagnose the wall problem, and according to the wall problem to develop the construction plan and construction, the whole process is very professional and reliable. It's been several years since Dulux Renewal Service was used to fix the wall problems in your home, and there have been no problems with the walls, and the quality is still very guaranteed.

1. When there is a small area of slight mold and peeling off the wall, we need to use a brick knife to scrape off the moldy part first, and then repaint it.

2. When there is a large area of mold on the wall, the mold needs to be removed first, and the wall needs to be repainted after drying, and wallpaper is pasted for beautifying the wall.

If there is mold on the white wall, it will not only shorten the life of the wall but also affect the overall aesthetics. Therefore, if there is mold on the white wall, it should be treated immediately. So, I'm going to talk about thatThe wall peel is moldysome related questions.

1. WhenThe wall peel is moldy, it can be removed with a toothbrush, and then the walls are kept dry with a clean, soft cloth and alcohol to prevent mold.

2. Bleach and water should be replaced at a ratio of 1:99, then put in a spray bottle and spray on the moldy wall. Then, clean the walls with a soft cloth to avoid moisture and mildew.

3. If the mold is not serious, you can clean the wall with 80 alcohol, but wear protective gloves such as gloves and masks when cleaning.

4. If you find humid air, you should open the windows less and keep the walls dry. You can also use an air cooler, air conditioner, or dehumidifier to remove moisture from your walls, which can prevent mold on your walls.

5. If the mold on the wall is relatively strong, first polish the wall with sandpaper. If there is delamination, use a blade to trim. For surfaces with irregular walls, they must first be repaired with a vertical grip with putty. After the wall is leveled, it should be painted with primer and then with latex paint.

The wall peel is moldyA layer of anti-filtration liquid can be applied to the surface of the wall so that a thin film layer composed of transparent waterproof rubber can be formed on the surface of the wall to prevent moisture from entering the inner layer.

7. IfThe wall peel is moldy, the waterproofing layer may not be done. Re-waterproofing is required to prevent the walls from becoming moldy again.

8. If there are stains on the wall, it cannot be cleaned with water, so the wall will mold when it is wet.

1. We must understand that the reason for the moldy white wall of Yuzaoqing is that the indoor air is humid. Therefore, we can buy some desiccant and place it in several areas of the room, which is beneficial for removing moisture from the room. Reduces the likelihood of mold on the wall.

However, it must be taken into account that the desiccant must be replaced in a timely manner after it fails.

2. Understand the cause of mold on the wall, and then prevent mold on the wall, only from the root cause. Indoor ventilation is very important, and fresh air is introduced in time to greatly reduce mold in the walls. However, it must be taken into account that if there is rainy weather, please do not open the windows for ventilation, so that it is easy to carry.

3. If it is necessary to prevent the formation of mold on the wall, it is necessary to avoid condensation on the inner wall. The most fundamental reason for condensation on the walls is due to the lower temperature in the room and the presence of more water in the air.

You can get it for free

In the rainy season, the wall will be moldy and peeling, resulting in the peeling off of the wall skin, which greatly affects the aesthetics of home decoration. If you are looking for a decoration company by yourself, and you can contact the decoration company for after-sales service within the warranty period, if it exceeds the warranty period, you must deal with it yourself. If only a small part of the wall skin is peeled, you only need to shovel off the peeling place and scrape a new layer of putty.

If it is a large-scale peeling, it is necessary to remove all the moldy and peeling areas, re-polish, putty and paint. Relevant knowledge popularization: 1. When dealing with the mold of the wall, the size of the wall peeling should be observed.

If the area is relatively large, you can use a shovel to remove the moldy areas on the surface, and then use sanding paper to smooth the surface one by one. When doing the removal of the wall skin, it should be extended outward by about 50 cm. 2. Afterwards, the wall should be applied two to three times with waterproofing and antifungal agents.

The direction of application is best horizontal and vertical, and it must be applied a second time after each drying, which is to make the bottom layer brush evenly brushed. 3. When the anti-mildew product is dried, add some water to the anti-mildew isolated product and stir it into a paste. Then use a shovel to scrape the previously treated wall so that the wall becomes very flat.