How do I remove paint from laminate flooring?

Remove any spills immediately and scrub with a cloth dampened with warm, soapy water. If the stain is still there, cover it with a topical alcohol compress. An alcohol compress should be covered for a few minutes.

Wipe the stain with a cloth soaked in ammonia. (Do not use ammonia on linoleum flooring or vinyl flooring.) To remove any latex stains, the stain can be wiped with an ultra-fine steel wool dipped in liquid wax.

Finally, wash thoroughly with soapy water, dry and wax. If the paint has dried: Wipe off the latex paint that has not dried, then gently scrape off the dry paint with a paint scraper.

Wipe the stain with a cloth or sponge dampened with warm, soapy water. Another effective treatment method is to mix 1 tablespoon of oxalic acid with a liter of water to make a solution, then wipe the stain with a cloth dipped in the solution. Finally, dry the area and wax as needed.

Warning: Oxalic acid is toxic and should be worn with rubber gloves and used with care.

The moisture content of the floor is generally maintained at 8-13%, so that the floor will generally not have problems under normal circumstances. However, improper laying and use will also cause quality problems of solid wood flooring, such as no moisture-proof treatment when laying; Wet with water or scrub with alkaline water or soapy water, which will destroy the brightness of the paint; The bathroom and the floor of the room are not properly isolated; In summer, the curtains were not drawn, so that the floor in front of the window changed color and cracked after being exposed to scorching sunlight; Or the temperature of the air conditioner is turned on too low, so that the temperature difference between day and night changes too much, causing the floor to expand or contract too violently and cause deformation and cracking. During the use of the floor, if it is found that the individual floor is warped or falling off, the floor should be picked up in time, the old glue and ash should be removed, the new glue should be coated, and compacted; If the paint film of individual floors is damaged or exposed, you can use No. 400 water sandpaper dipped in soapy water to polish, then wipe clean, wait for drying, carry out local color, after the color is dry, brush and apply a paint, dry for 24 hours, polish with No. 400 water sandpaper, and then wipe the wax for polishing.

Waxing once a month is also the best way to maintain it, but wipe off moisture and stains before waxing. If it is laminate flooring, use sandpaper or a knife to clean it. Of course, it is best to clean it with an organic solution (such as gasoline, or nail killer for girls).

Because the surface of the laminate floor is wear-resistant and impermeable, it will not affect the decorative layer below. However, if it is a solid wood floor, a multi-layer solid wood floor, or a lacquered panel in a laminate floor (piano paint, crystal paint, violin paint, ceramic paint, etc. are the same), because the surface of these floors is brushed with paint, and if you are not careful, the surface of the floor will be damaged, which will completely affect the aesthetics, so you should be especially careful when handling it.

1. If the floor is stained with grease, fruit, hand-shaped juice, wine and other stains, you can use warm water or warm cleaning agent to wipe it clean.

2. If the floor is stained with shoe polish, cigarette oil, charcoal and other stains, you can use alcohol to wipe it.

3. If the floor is stained with chewing gum, the stool can only be cut off with a blunt instrument after it hardens, and wiped clean with a wet towel after cutting.

4. If the floor is stained with nail polish, paintbrushes or even tar, it can be removed with a general detergent, and then wiped with a vacuum cleaner or a semi-dry mop.

1. Wet toothpaste with a damp cloth or a soft brush dipped in water and slowly wipe the metal paint, some dirt will slowly fade if it is wet.

2. Use a damp cloth dipped in soft dish soap to slowly wipe the lacquer surface of Jinbian, and when there are many stains, you can dip the water and gently rub the brush to wash off the dirt.

3. Wipe the metal paint surface with a damp cloth dipped in a little vinegar, dip it in water and wipe it off.

4. Wipe the metal paint surface with a damp cloth dipped in Brahmin fire, and some dirt will slowly fade.

5. Buy some commercially available metal paint cleaners, spray them on the metal paint surface, and wipe them off with a damp cloth.

6. Wipe the metal paint surface with a damp cloth dipped in professional cleaning solution, and wipe it many times to remove the dirt.