How to choose the selection method of multi layer parquet?

How to choose the selection method of multi-layer parquet? How to choose parquet? Teach you a few tricks.

When choosing parquet, we must first select the appearance quality, and generally there should be no wood defects such as decay, dead joints, and wormholes. The color difference of multi-layer parquet is caused by the different growth environment of wood, and the producer can only make it as harmonious as possible with the help of modern technology, in fact, only the surface of artificial materials can avoid the generation of color difference (such as laminate flooring), and the slight color difference of multi-layer parquet can fully show the natural effect of pure wood flooring. Especially in the manufacture of wood surface veneer, it is impossible to make each piece of veneer color difference.

There are also consumers will find that the existing floor concave and convex notches are very rough, in fact, this roughness is the design characteristics of multi-layer parquet, it adopts this deliberate burr design, in the process of sizing and paving, so that the floor has a good glue effect, so that the occlusion of the concave and convex notches between the plates will be tighter, and it is not easy to separate the plates, which will make the laying effect more effective. In the case of multi-layer parquet, the abrasion resistance often does not depend on the thickness of the skin, but on the coating that covers the most surface of the floor. Place the floor board at an oblique place in the bright place, and observe whether its paint film is plump and uniform from the end face of the board, and whether there are wave-shaped indentations.

The paint finish should be uniform, no bubbles, small white spots and other phenomena, there should be no obvious stains and damage on the surface, and the method of testing the processing precision of multi-layer parquet is very simple: take more than 5 floors in the same packaging box and put them on a flat ground, assemble them, observe whether the tenon and groove are tightly combined, and then touch them with their hands, feel whether they are flat, if there is a more prominent feel phenomenon, it means that the product is unqualified. After touching it, pick up two pieces of assembled multi-layer parquet and shake it in your hand to see if it is loose.

In addition, ** and brand factors are also important factors in measuring parquet. The products manufactured by the introduction of the whole production line equipment in Europe have the incomparable quality of domestic small equipment. In addition, it is very necessary to leave the floor in the room that needs to be paved for a few days before paving, so that the equilibrium moisture content of the floor tends to the equilibrium moisture content of your home.

Of course, don't forget to remove the packaging box and moisture-proof plastic bag from the floor. It is recommended that you go to the ** event place to try: the event address is [event date] 2015-03-28 (Saturday) - 2015-03-29 (Sunday) 09:

00--17:30 [Location] Building 2, Intellectual Industrial Park, No. 1 Hulan West Road (near Gonghexin Road), Metro Line 1, Hulan Road Station, Exit 4. It will be held almost every month.

Multi-layer parquet mainly examines the timber and glue. If you use substandard or leftover wood, or even substandard multi-layer boards, it is easy to cause pollution of the home environment and is prone to structural problems. It is recommended to choose the three-layer solid wood flooring of Shengxiang, which is made of natural logs, and the material is very environmentally friendly.

In addition, it has high heat transfer efficiency, gentle heating and cooling, no sudden cooling and sudden heat, and a comfortable feeling.

Generally speaking, the thickness of the plastic flooring is 2-4mm, and the thickness of the multi-layer parquet is appropriate. The most important thing is the appropriate thickness of the dough when purchasing, don't blindly pursue the thickness.

In many cases, consumers will be very concerned about whether the color and texture of the floor are consistent, and think that the inconsistency will affect the decoration effect. Because the panel of the parquet is made of natural wood, the natural wood itself will have different shades of color, usually the sapwood is light, the heartwood is dark, so the parquet objectively has the phenomenon of uneven color difference and pattern, which is a natural phenomenon. When choosing parquet, as long as there is no obvious color difference, there is no need to be overly demanding of color consistency, so as to retain the original style of nature.

The following points can be paid attention to when choosing the flooring:

1. It should be purchased in regular companies and their subordinate stores, shopping mall showrooms and building materials supermarkets. Regular company in the service ***. Do not be greedy for small and cheap, and buy from the so-called brick-moving vendors, so as to avoid construction and maintenance and other service problems, and endless troubles.

Ask the other party to issue an official invoice.

2. For imported products, the supplier should provide the latest customs declaration form to ensure that the products are pure imports. In addition, according to the relevant national laws and regulations, imported products should provide quality inspection reports from relevant domestic authorities to ensure product quality.

3. It is necessary to choose the best product performance, that is, the same quality ratio and the same quality performance.

4. According to personal hobbies, living environment (such as light, etc.) to choose the color of multi-layer solid wood flooring, generally speaking, the lighting conditions are a little worse can be selected light color, and the color of the stronger personality can be selected darker.

5. Choose a multi-layer solid wood floor with a better surface wear-resistant. At present, the surface coating of clay paint on the market is the best, which can be tested by touching the surface as smooth as satin and scratching with fingernails.

6. Choose products with low formaldehyde content. Because it's about health and safety.

Solid wood laminate flooring has good stability: due to the unique structure of the multi-layer solid wood flooring that is criss-crossed and arranged, it has very good stability. Don't worry too much about the deformation of the floor due to moisture, and it is also one of the floors that can be installed with underfloor heating.

Solid wood multi-layer laminate flooring is cost-effective: multi-layer solid wood flooring does not use as much wood as solid wood flooring, and can make full use of materials, so it is much cheaper than solid wood flooring. Since the materials used in multi-layer laminate flooring are all logs, there is almost no difference between the feel of the feet and solid wood flooring.

And the surface of the multi-layer parquet is made of high-grade wood, which looks the same as the solid wood floor. Compared with solid wood flooring**, it is much cheaper, so it is very cost-effective.

Solid wood multi-layer laminate flooring is easy to care for: The surface of multi-layer solid wood flooring is well painted, has high wear resistance, and does not require too much effort to maintain. The best multi-layer solid wood flooring on the market can be left unwaxed for 3 years, and the paint surface can be kept as bright as new.

Solid wood multi-layer laminate flooring is easy to install: Solid wood parquet, like laminate flooring, does not need to be ground keel during installation, as long as it is leveled, and the floor height can be improved. Generally speaking, 100 square meters can be completed in one day, which is much faster than the installation of solid wood flooring.

Comparison of the thermal conductivity test of solid wood geothermal floor, floor tiles, solid wood composite and pure solid wood.

A swipe :

Use a metal key or nail to scrape and scratch the surface of the floor several times, and then rub the scratches repeatedly with the palm of your hand. If you can't see scratches at all, it means that it is more scratch-resistant; If you can see obvious scratches or see the bottom plate, it means that the wear resistance of the floor is not up to standard.

Second saw: You can see off a corner of the floor head after the wear resistance test, sawing is more laborious, indicating that the density of the substrate is larger, and the easier to saw means that the density is not enough.

Three smells: High-quality flooring with sandpaper slightly sanded on the edge of the floor, will smell the rich natural essence of the fragrance. The intrinsic fragrance of inferior laminate flooring is not obvious, and some even contain harmful chemical components, exuding a pungent smell.

Four looks: the surface of high-quality laminate flooring is smooth, the color is gorgeous and natural, the varieties and specifications are complete, the reverse moisture-proof balance layer is thick, and there are moisture resistance factors. The surface of the inferior composite floor is rough, the color is dull, the variety and specification are single, the reverse moisture-proof balance layer is thin, and some even use kraft paper instead of the moisture-proof balance layer.

Five: When selecting laminate flooring, you can take the method of hand-weighing the weight to identify the quality of the floor. Generally, the base material used in high-quality laminate flooring is natural wood, which is crushed and then reconstituted by high temperature and high pressure, which is relatively heavy.

Six quantities: The thickness measurement data of high-quality laminate flooring is exactly the same as the data marked on the outer packaging, while the error of low-quality laminate flooring generally occurs.

Seven touches: The size of high-quality laminate flooring is consistent, and there is no gap between the splices of the two floors, and the joints are very smooth when touched by hand. The inferior composite flooring has different sizes, and there are obvious gaps in the joints of the two floors, and there is an obvious concave and convex feeling when touching the joints by hand.

Problems in the purchase of laminate flooring.

First, before purchasing laminate flooring, it is necessary to understand the level, orientation and area of your house, and it is best to draw a floor plan for overall planning, specifically allocate the use functions of each room, and then choose the floor according to local conditions;

Generally speaking, young people are busy with work and study, so it is impossible to completely match the requirements of the elderly and children, so it is best to discuss and reach a consensus with the whole family.

Consider the performance of laminate flooring, whether it is temporary or long-term, and whether it will cause damage to other buildings in the house when it is laid.

There is also the need to consider your own financial problems and budget for it. These are all things to consider before going to buy flooring.

Bayer flooring. Second, it is mainly to observe whether the surface gloss of the laminate floor is uniform, whether the pattern is uniform, whether there are white spots and stains; Whether the interface is neat and undamaged, and whether there are micro-sawtooth cracks.

Bayer flooring. Third, see whether the floor has moisture-proof measures, whether there is a special moisture-proof pad, whether there is a thick moisture-proof layer, whether there is a professional waterproof glue, which will affect the moisture-proof performance of the product.

Bayer flooring. Fourth, understand the after-sales service, thoughtful and perfect after-sales service, not only the full embodiment of the strength of the enterprise, but also one of the important parts of product quality, whether consumers can rest assured, peace of mind to use the product has played a pivotal role.

Bayer flooring. A good start is half the battle, and the next step is to better decorate your home by choosing the right laminate flooring.

Laminate flooring is more suitable for home decoration. It is made of medium density board, particleboard, etc. as the base material, and is compounded with impregnated paper on both sides by a certain temperature and pressure, and the surface is covered with a layer of coating film. The coating material on its surface is mostly melamine or aluminum oxide.

The wear resistance of these two materials is ten or even dozens of times that of solid wood floor paint film. In particular, aluminum oxide is a raw material for the manufacture of artificial gemstones, so it has better wear resistance. Generally, the wear-resistant layer outside the laminate floor is mostly made of wear-resistant paper produced by Mead Company, and the market is mostly advertised as 46 grams of 110g aluminum oxide, and the wear resistance index is more than 6500 rpm.

6500 was converted to the national standard. In addition to wear resistance, formaldehyde release is also an important factor to consider. Because formaldehyde is a gas that is extremely harmful to the human body in decorative materials.

The national standard is E1 level, that is: milligram l If it reaches the E0 level (milligram), it is safer and more environmentally friendly. And then there's:

important factors such as the rate of water absorption and expansion. Suggestion: When purchasing, it is proposed to look at the quality inspection report of the brand, and then there is a big brand that must be bought, with quality assurance and after-sales service.

It is better to be able to exempt the country from inspection. Be sure not to buy products produced by small manufacturers, otherwise you will be in trouble for yourself! But there is no need to pursue famous brands.

For example, the quality of the hot "Rhine Sunshine" in the current advertising is not necessarily very good, and there is a serious "height difference" in the paving, which is purely a production control problem! The icons, shengda, nature, etc. in the brand are ok.

But there are some brands that are not well-known, but the quality is really good, and they are cheap. Follow my advice above to buy, be careful, and you'll definitely get the best value for your money! 100

The difference between laminate flooring is so big, how to choose this.