When cleaning the floor, how to deal with the water stains left on the ground?

Especially when cleaning at home is a headache, if you can't find a way, you won't have a perfect result. You can add some baking soda when mopping the floor.

Or dish soap.

Stir and keep the mop moist for the first time. You don't have to change the water all the time, and you must make sure that all the dirt can be taken out. Next, you can use a sponge to clean up the dirty water, and after washing it, you will definitely not leave a watermark by mopping it again, and you must have two mops in the family. <>

Cleaning up for the cleaning of tiles must take some small effort, don't be afraid to waste time, the first time is basically to dispose of the dirty, and after cleaning up, you can use a dry mop to dewatermark, not only will not leave a watermark after the floor is dry. And it's very bright, and it looks very comfortable. In particular, tile cleaning is relatively simple, and sometimes you can use a vacuum cleaner for cleaning the floor.

Or a broom.

You can sweep up the clutter, and it's not very troublesome. <>

If you are not careful to scratch the ground, the tile floor is easy to scratch, which everyone should pay more attention to. For example, when there are a lot of sharp things when sweeping the floor, they should be put in the trash can in time, and they must be used with warm water when mopping, and the mop can be soaked in the container for a while, so that the dish soap can be completely absorbed. When mopping the floor, it will become easier, and it will not scratch the ground, and there should be a sequence of cleaning, first of all, start cleaning from the room, and clean up the debris while mopping.

Open windows for ventilationWhen all the floors are cleaned, when the house is dry, you can open the doors and windows of the room to circulate the air, also so that the floors can dry faster. If the floor is dry, you can close the doors and windows to avoid a lot of dust coming in and out, which will affect your mood and the effect of your own cleaning. With a sense of patience in cleaning, you can make your home look warm and cozy.

Don't use too much force when mopping the floor, you can use a broom to make more force than using a broom, look for the feeling of sweeping with a broom, and use a mop like a towel, and there will generally be no water stains. I switched from a sponge mop to a towel type.

The water stains left on the ground can be mopped away with a mop, or wiped off with old clothes that are not used, and the effect of this method will be better.

When cleaning the ground, the water stains left on the ground should be adsorbed by mopping and other means.

In fact, you can use some mops to mop it clean or wipe it clean with some towels, these water stains are still easier to deal with.

Summary. Step 1: Connect the high-pressure water gun to the water pipe, hold the handle tightly with one hand, and hold the gun head with the other.

Step 2: Walk along the concrete floor to be cleaned, spraying dirt on the ground with a water gun tip while walking.

Step 3: The dirt on the cement floor can be removed after repeated spraying several times in the place where the dirt is severe, in a Z-shaped position, and cleaned in order.

How do I remove dirt from a concrete floor? The ground is seriously oiled, and you want to do waterproof and clean it again?

Step 1: Connect the high-pressure water gun to the water pipe, hold the handle tightly with one hand, and hold the gun head with the other.

Step 2: Walk along the concrete floor to be cleaned, spraying dirt on the ground with a water gun tip while walking.

Step 3: The dirt on the cement floor can be removed after repeated spraying several times in the place where the dirt is severe, in a Z-shaped position, and cleaned in order.

How do I clean my floors properly and avoid stains from being left?

Flooring is an important part of home renovation and a place that we often come into contact with in our daily lives. If the floor is not cleaned properly, it will not only affect the aesthetics, but also cause damage to the floor and even affect health. So, how do you properly clean your floors so they don't leave stains?

Here are some practical suggestions:

1.Choose the right cleaning tools and sleepy cleaners according to the material of the floor. Different flooring materials have different cleaning requirements, such as solid wood flooring, laminate flooring, tile flooring, etc.

Generally speaking, hardwood flooring and laminate flooring should not use too much water or alkaline detergent, otherwise it will cause the floor to swell or discolor. Tile floors can be cleaned with neutral or weakly alkaline cleaners, but care should be taken to avoid scratching the surface. Choose a soft mop or rag for cleaning tools, and avoid using a hard brush or steel wool.

2.Remove loose dust and trash before cleaning. This avoids bringing dust and trash to the floor during the cleaning process, causing more stains. Dry obi-cleaning can be performed using tools such as a vacuum cleaner, broom, or dry rag.

3.When cleaning, pay attention to control moisture and strength. Whether you are cleaning the floor with water or detergent, you should take care to control the moisture to avoid allowing water to seep into the crevices of the floor, causing the floor to become deformed or moldy.

At the same time, it is also necessary to pay attention to the control of the force and avoid rubbing or scratching the floor too hard, causing wear or scratches on the floor surface.

4.After cleaning, it should be dried and ventilated in time. After cleaning, wipe the moisture on the surface of the floor with a dry rag to avoid water stains or marks. At the same time, open windows or turn on equipment such as fans to allow air to circulate and speed up the drying of the floor.

5.Perform regular maintenance and waxing. In addition to daily cleaning, it is also necessary to regularly maintain and wax the floor slag removal board to increase the shine and durability of the floor.

In general, the floor can be waxed every six months or a year, but it depends on the material and use of the floor. Clean the floor thoroughly before waxing and choose a suitable wax agent. After waxing, wait for the wax layer to dry completely before moving around or placing furniture, etc.