How to renovate bathroom floor tiles? What are the precautions for tile renovation?

Generally, the decoration of the bathroom and toilet of the family is decorated with ceramic tiles, because the tiles are not only waterproof, long service life, more beautiful, and long, or the decoration style wants to change more, so it is necessary to decorate the tiles in the bathroom, so how to decorate the tiles in the bathroom? Is there a better way? If the enamel on the surface of the old floor tiles has been worn and damaged, or many places have been hollowed out and fallen off, or even have been seriously polluted by stains, then the general simple repair is ineffective, and it is best to remove and replace the floor tiles.

<>However, it is relatively difficult to replace only those damaged floor tiles, because these floor tiles were laid many years ago, and it is difficult to find floor tiles of the same color, style, and model after many years. Now there are special wall and floor tile renovation materials on the market, such as floor tile surface treatment agent, floor tile, mosaic activator, these materials can be directly painted on the floor tile, and then paved with new floor tiles, saving time and energy to eradicate the old floor tiles. The floor tiles are basically not damaged, but there is a problem between the floor tile joints, and then only the floor tile joints are all eliminated and redone.

Due to the long-term use process, a large number of bacteria and dirt can breed in the joints of the floor tiles, these must be removed, otherwise it will not only affect the beauty of the floor, but also endanger health. The in-situ floor tiles need to be thoroughly cleaned first, otherwise the floor tiles below will become a breeding ground for microorganisms and bacteria, which is very detrimental to the future living environment and family health. The wall should be made of about 30 cm of waterproof paint to prevent the wall from being soaked in water; If the walls of the bathroom are not load-bearing and lightweight, the entire wall will be covered with waterproof paint; If you have a shower screen with two panels, cover both connected walls at the same time.

If there is a bathtub and the adjacent wall of the tub is adjoining the tub, the height of the waterproof coating is higher than the upper edge of the tub.

The wall tiles are fully pasted, which can resist moisture erosion, protect the waterproof layer of the wall, and is also convenient for long-term cleanliness and beauty; Homes with suspended ceilings should pay attention to the part of the ceiling that is covered with tiles to protect the entire wall. After the in-situ tiles are chiseled, the ground must be leveled with cement mortar, and then waterproofed. This avoids leakage caused by uneven thickness of the waterproof coating.

The seams should be brushed in place. The floor of the bathroom wall and the joints between the water and water pipes and the floor are the most likely to cause problems.

1. Cleaning and refurbishment: the black edge can be washed with banana water; The floor tiles with small damage can be waxed, but the ground is too slippery after completion, so it is not recommended to use them; 2. Grinding and refurbishment: For the uneven wear of the whole brick, it can be made uniform and new through grinding, but the pattern cannot be retained; 3. Replace local bricks, for only serious local damage, knock the tiles to be replaced, and try to replace them with bricks with the same color number, so it is recommended to leave a small amount of tiles for future repair.

4. Reinstall the floor tiles, for the situation that it is too worn; You can use tile adhesive to re-attach new bricks on top of old bricks; Or smash off the repaste.

If it is a kitchen tile, to prevent the accumulation of grease stains, you can attach grease repellent stickers to the areas that are easy to come into contact with grease stains, or place paper that absorbs oil stains and place them on the dirty floor. Every time you focus on cleaning the floor and dealing with the gaps in the tiles, you need to spend a little more time and wipe with a towel or toothbrush, which will be full of unnecessary problems.

Basically, it's just a matter of knocking the tiles open and adding a little cement to them. After that, paint is applied in a different color than the tile.

We can clean. Secondly, it can also be polished, if it is serious, we will knock it on and re-add it, and we must pay special attention to coating waterproof glue when updating.

The best way to renovate the tiles is definitely to remove them and put on new tiles, so that they can be better.

In people's daily life, the bathroom is used more frequently, and it is also the place where bacteria are most likely to breed, so it needs to be renovated after a long time.

1. What should be paid attention to in the renovation of the bathroom floor.

1. Understand the daily life and opinions of family members.

In order to make it more convenient for the family to use the bathroom floor after renovation, before the bathroom floor is renovated, you should consult the family's usual use habits, and if there are elderly people and children at home, you should also do a good job of anti-slip facilities.

2. Understand the floor plan.

Before renovating the bathroom, it is necessary to comprehensively analyze the floor plan of the house, roughly understand the size of the bathroom and the location of the drainage, and then install the equipment location of the bathroom according to the size of the bathroom.

3. Smash the wall and demolish the ground.

If the wall tiles and floor tiles in the bathroom are very old and need to be renovated, you can first knock off the wall tiles, and then remove the floor tiles, and you can pave the new tiles after cleaning the tiles for a long time.

4. Refurbishment of toilets, basins, faucets and other products.

The renovation of washbasins and toilets and faucets is relatively simple, these can be refurbished at any time, and when it is necessary to replace it, you only need to buy a new one, the method only needs to remove the old one, and then install the new one, and you need to turn off the total miscellaneous switch when renovating, so as not to shoot water everywhere. However, if you need to move the displacement of the toilet, you need to dig a pit in the ground, connect it with the original main branch pipe with a new PVC pipe, and then change it to the renovated position according to the position of the toilet drain.

Summary: The above is how to renovate the bathroom floor shared for you, I believe you have a corresponding understanding after reading the above sharing, if you need to know more about it, please continue to pay attention to Qeeka Home**, will answer for you one by one.

The place where the bathroom uses the most water may be discolored and damaged after a long time, and many people will choose to renovate it. So, below I will share with you what are the methods of bathroom tile renovation, as well as the precautions for bathroom tile renovation.

1. What are the methods of bathroom tile renovation.

The bathroom tile renovation method is as follows:

1. Remove old bricks: If the enamel of the old tile has been worn out, or the hollow drum has fallen off, we can remove and replace the tile.

2. Directly lay new floor tiles: use surface treatment agents, floor tiles, and mosaic binders, paint them on the tiles, and then lay the new tiles on them.

3. Laying wooden floors on old floor tiles: If you don't want to use tiles and want to lay wooden floors on the old ground, clean up the original tiles first, and then roll to lay wooden floors.

Second, the bathroom tile renovation precautions.

1. Make about 30cm of waterproof coating material on the wall to avoid soaking the wall. If the bathroom wall is a non-load-bearing wall, it is best to apply waterproof paint on the entire wall, if you use a shower screen at home, the shower screen needs to be painted, if you use a bathtub at home, the wall next to the bathtub, the waterproof coating is higher than the bathtub.

2. The wall tiles must be pasted full, so that the house can be moist and eroded, effectively protect the wall waterproof layer, and keep it clean and beautiful for a long time. If the bathroom uses a suspended ceiling, it should be noted that the position covered by the ceiling should also be covered with tiles to protect the wall.

3. After chiseling off the original floor tiles, use cement mortar to level the ground and then do waterproof treatment. To avoid leakage caused by uneven application of waterproof coating, the seam position should be painted in place, and the joints between the ground and the upper and lower water pipes and the ground joints are prone to problems, so be careful.

4. During the construction process, the workers should be asked to deal with the corners of the painting, after the bathroom decoration is completed, block the drain, pour in 20cm high water, 24 hours later, check whether there is leakage on the surrounding walls and the ground to ensure the quality of waterproof engineering.

Article summary: The above is what I share with you what are the bathroom tile renovation methods, as well as the relevant content of bathroom tile renovation precautions, I hope to help you. If you also want to renovate the bathroom tiles at home, you can refer to the above content.

In order to better take care of our hygiene, many people in our bathrooms like to put tiles more when decorating. However, the tile will be particularly unsightly after being used for a period of time, so many people will want to celebrate the lack of a way to solve this problem. In this way, our bathrooms will continue to have a good environment.

Let's take a look at it with usBathroom tile renovationWhat are the tips?

First, bathroom tile renovation skills.

1. The first step is to remove the dust and dirt on the surface of the old tile, and the next step is to use the tile adhesive to do the base layer on the old tile, and the new tile can be directly pasted after the completion of the plastering. The adhesive should also be applied thin on the back of the new tile, and the thickness should be subject to the back pattern of the covered tile, so that the new tile will be more firmly glued.

2. The second step is to pave the new tile, it is also very important to use a rubber hammer to tap the new tile and adjust the welt. It is necessary to pay attention to the reserved expansion joint, after 24 hours, wait for the tile adhesive to dry through, and use the grout to hook the joint. With the right tools, consumers can DIY on their own.

3. The third step is that individual seriously bulging or damaged tiles need to be removed by Sun Zhong, and we also have to pay attention. After shoveling, repair with mosaic surface tile surface treatment agent, and after the surface of the old tile is as smooth as the old tile, then paste the new tile with tile adhesive to make it firmer.

Second, what are the brands of ceramic tiles.

1. The big brand in the industry is also the leader Marco Polo tiles. It is the earliest branded ceramic tile brand in China, and the quality is also very guaranteed. It is a ceramic tile brand with good sales in China, and has set up a number of stores at home and abroad.

The variety of Marc Polo tiles is very complete, and the quality is excellent and environmentally friendly.

2. The special and famous Mona Lisa tile is a product of Mona Lisa New Materials Group. It is also a very good product. There are many excellent design talents in the company, and they are constantly innovating and updating products.

The texture of Mona Lisa tiles is very exquisite, rich in artistic atmosphere, in line with people's aesthetics, and is quite popular with people.

3. Especially popular with everyone's favorite Smick ceramic tiles, the manufacturing has introduced a full set of foreign advanced professional ceramic tile production lines, so the quality is also particularly guaranteed. Not only the production efficiency is high, but also the quality of the tiles produced is very high. The material of the tile is Smick tile, and there are many varieties of ceramic tiles, all of which have obtained national patents.

For our construction, we also have to understand our skills. That's what matters so much. It can give our Zechashan family a good environment. Contribute to our residence.

Bathroom in the tile decoration for a long time will have the phenomenon of trembling and falling off, causing potential safety hazards to the home, so many people will choose to renovate and decorate, when renovating the bathroom tiles, you need to determine the wall area, locate the number of tiles required, and follow the correct operation process during the later constructionBathroom tile renovationHow to construct?

First, how to construct the renovation of bathroom tiles.

1. Determine the number of tiles, and determine the number of tiles to be restored before decorating the bathroom tiles. If there are not a lot of cracked and empty tiles in the bathroom, only a partial renovation is required. If there are large areas of cracks or gaps, they need to be fully restored.

Of course, if you want to change the style of decoration, you will also have to replace all the bathroom tiles. The actual number of tiles is slightly more than the decorative area, and the loss of the anti-hall is insufficient.

2. Remove the original tiles For tiles that have been damaged, you must remove them before renovation, and then remove the original cement mortar as much as possible, and then replace them with new tiles. At this time, it should be taken into account that since the surface of the walls and bathroom floors is waterproof, it is necessary to avoid damage to impermeability when renovating the tiles. If the tile is replaced in a large area, it is best to remove the original tile and then perform a water seal test to verify whether there is impermeability.

If the waterproof item is damaged, it must be redone.

3. After the wall or floor that needs to be laid is grounded, new tiles can be laid. The new tiles are laid directly with cement mortar and then gently tapped with a rubber hammer to avoid hollow drum problems. Mortar stains on the surface of the tiles that have been placed should be cleaned in time to avoid being difficult to clean after drying.

Second, how to choose bathroom tiles.

1. Pay attention to the anti-slip performance of ceramic tiles, the anti-slip properties of bathroom rentals are very important, especially when there are elderly and children at home, matte bricks have the concave and convex feeling of natural rocks, suitable for humid environments and excellent anti-slip performance. When making our choices, we need to consider our safe use to protect the environment.

2. Wall tiles can choose large tiles that are easy to clean and keep dry, and there are many tiles in the bathroom. For Nobel tiles, there are 25 series bricks, 45 series bricks, 63 series bricks and unique color series, Cezanne series prints. We need to understand it when we are building.

3. The waistline should be full, and the waist should be used to improve visibility. You can choose between horizontal and vertical waist circumferences based on the general matching effect. The pattern of the waist and the color of the tiles should be harmonized.

In general, the waist and tiles of the bathroom are. It is better to use simple patterns. When choosing a pattern, we need to consider the style factor.

All need to be considered.

4. Due to the different functions, the main bathroom and the guest bathroom are also very different in design and decoration. The guest mosaic has a clear atmospheric style to clarify the space, so the mosaic is using a range of light colors. To create a minimalist and bright atmosphere, you can opt for the ultra-white series, which not only has a good finish, but is also easy to clean.