How to renovate old bathroom tiles

There are special tile refurbishment materials, such as tile surface treatments, floor tiles, and mosaic binders, which can be applied directly to the tiles.

Then lay the new tiles on the top, saving the time and energy of eradicating the old tiles in the middle, or if the tiles are not damaged, but there is a problem with the joints between the floor tiles, then you only need to remove all the floor tile joints and redo them.

If the age of the house is relatively old and the waterproofing of the bathroom is not good, it is recommended to dismantle all the bathrooms and redecorate and renovate them.

Wash the bathroom tiles with a cleaner, and after washing, they will look like new.

Solution 1: If it is dirty, scrub it with detergent;

Solution 2: If you want to renovate, remove the old floor tiles and use cement sand paddles to pave the new floor tiles.

Eat sooner or later to change the new with the tile touched a lot, how to do it can not be renovated, unless the tile is re-pasted, or there is a kind of protective tile tile wallpaper pasted, after waking up the same weight can only eat so much. How much tutu?

Magnum ** has sold a kind of tile remover. After spraying, the stains on it can be removed to achieve a cleaning effect. Give it a try!

1. Remove old bricks.

If the original floor tiles have been partially damaged, more hollow or falling off, the surface enamel has been worn, or seriously dirty, it must be removed and replaced, and the effect of simple repair is generally not good. It is difficult to replace only a few floor tiles, because it is almost impossible to match the same color, model and style of floor tiles over the years.

2. Directly pave new floor tiles.

At present, there are two kinds of brick wall renovation materials on the market: ceramic tile surface treatment agent and ceramic tile and mosaic binder, which can be directly painted on the old brick surface, and then paved with new floor tiles, saving time and energy. Kitchen and bathroom walls and floors, regardless of the type of tile, can be directly applied to the old tiles with new tiles. Individual seriously bulging or damaged tiles need to be removed, after shoveling, repair with mosaic surface tile surface treatment agent, and after the surface of the old tile is as smooth as the old tile, then paste the new tile with tile adhesive, which is more firm.

3. Paint the old wall and renovate it.

Painting paint on old tiles or mosaics has higher requirements for the flatness of the wall and the putty layer.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

Now the fast refurbishment products on the market, including the surface treatment agent of the tile and the ceramic tile and mosaic binder, are more commonly used in the European market, and the new ceramic tiles and mosaics can be directly pasted on the basis of not eradicating the old ceramic tile base layer; Or use the surface treatment agent of the brick to plaster the base layer, and the putty can be directly painted after scraping the putty. This method of rapid renovation and paving will not damage the base of the old house, reduce the decoration cost and shorten the construction period, and also avoid the problem of garbage and noise in the renovation of the old house. Courtesy of Grand Trinel International.

Determine the number of tiles that need to be refurbished. Before renovating the tiles in the bathroom, determine the number of tiles that need to be renovated. If there are not many cracked, hollow tiles in the bathroom, then only a partial renovation is required.

If there is a large area of cracking or hollowing, it needs to be completely refurbished. Of course, if you want to change the decoration style, you also need to replace all the tiles in the bathroom.

Knock off the original tiles.

For the tiles that have been damaged, it is necessary to knock them all out when renovating, and then remove the original cement mortar as much as possible, and then re-install the new tiles. At this time, it should be noted that since the walls and floors in the bathroom are waterproofed, it is necessary to avoid damage to the waterproofing when renovating the tiles. If it is a large-scale replacement tile, it is best to knock off the original tile and do a closed water test again to check whether the waterproof has been damaged.

If the waterproofing is damaged, it needs to be redone.

Lay new tiles.

After the wall or floor that needs to be re-tiled has been treated with a base layer, it is time to lay new tiles. The new tiles are paved directly with cement mortar, and then gently tapped on the sides and in the middle with a rubber hammer to avoid hollowing. The mortar stains on the surface of the tiles that have been laid should be wiped clean in time to avoid being difficult to clean after drying.

When all the tiles are paved, then do a good job of grouting.

The best way to renovate old tiles in the bathroom is to cover them with tile paint. The specific or sailing steps are as follows:

1.Clean tile surfaces: Use detergent and water to clean the tile surfaces to ensure that the surfaces are clean and dust-free.

2.Grinding the tile surface: Use sandpaper or a grinder to grind the tile surface so that the tile paint can adhere better to the surface.

3.Primer: Paint the tile surface with a tile primer so that the tile paint can adhere better to the surface.

4.Paint ceramic tile paint: Use ceramic tile paint to paint the surface of the tile, and the painting should be uniform and meticulous to ensure that the coating thickness is uniform.

5.Wait for drying: Wait for the tile paint to dry, which usually takes about 24 hours.

6.Painting the protective layer of the tile: The surface of the tile is painted with a protective layer of the ceramic tile to protect the preparation of the ceramic tile coating car from damage.

It should be noted that the color and quality of the tile paint should be chosen well to ensure the effect and service life after renovation. In addition, it is necessary to pay attention to ventilation during the use of ceramic tile coatings to avoid harm to the body.

The best way to renovate old bathroom tiles is as follows:

1.Use Tile Stickers: You can use tile stickers to cover old tiles, which is a very simple way to do this, without any professional skills, just stick the stickers to the tiles.

They come in a variety of different designs and patterns, ranging from simple monochrome patterns to complex patterns.

Spray paint with acrylic: Acrylic spray paint is a powerful way to renovate and give your bathroom old porcelain Xiaoxiao tile a new look. Before installation, make sure that the tile surface is dry, free of oil and dust, and wait less than 12-24 hours after cleaning, and then spray paint suitable for a hard, wear-resistant surface.

Choose an acrylic spray paint that suits the color of the tile and the color of the fabric.

3.Use waterproof tile cabinet adhesive: Waterproof cabinet adhesive can create adhesion and prevent further aging after being applied to the surface of old tiles. After applying the cabinet adhesive or rolling on the surface of the old tile, wait 12 to 24 hours before applying a layer of anti-splash adhesive.

The above three methods are suitable for tile renovation in different situations, choose the one that suits your needs and budget, and make the old porcelain porcelain tile in the bathroom look like new.

The best way to renovate old tiles in the bathroom is as follows:

Shoveling old tiles: Start by using tools such as a shovel to remove old tiles.

Directly lay new floor tiles: Lay new floor tiles directly on top of the old tiles.

Wooden flooring on old floor tiles: If you don't want to use tiles and want to lay wooden floors on old floors, you need to clean the original floor tiles before laying wooden floors.

Painting: You can apply some new paint to the surface of the tile to make it look like new.

Re-paving tiles: If you need to replace the tiles in the bathroom, you can chisel off the old tiles, use cement mortar to level the ground, then do waterproof treatment, and finally lay new porcelain reed-based bricks.

It is necessary to pay attention to the fact that during the renovation process, the waterproof layer needs to be protected to avoid damage to the waterproof layer caused by improper construction. In addition, during the construction process, it is necessary to avoid damaging the original wires and pipelines and other facilities to ensure safe construction.

To renovate old bathroom tiles, here are some common methods:

Clean: First of all, clean the tile surface thoroughly, you can use detergents and brushes to remove dirt and grease. Make sure that the old jujube tiles are clean for subsequent renovation steps.

Paint refurbishment: If there is obvious damage to the surface of the tile or the color fades, you can consider renovating it with a special tile paint. This paint can change the color and appearance of the tiles, giving the old tiles a new look.

Before using the paint, it is necessary to sand the surface of the tile so that the paint adheres better.

Tile stickers: Another easy way is to use tile stickers, also known as tile adhesives. Available in a variety of patterns and colors, these stickers can be applied directly to the surface of the old tile for a refurbished effect.

Stickers are easy to install and can quickly change the look of your restroom.

Replenishment replacement: If the tiles have obvious breakage or cracks, consider partial replacement. Remove the broken tile and replace it with a new one. This restores the appearance of the tiles and ensures the overall aesthetics of the bathroom.

Regardless of which method you choose, it is advisable to do adequate preparation beforehand to ensure that the tile surface is clean and flat, and to choose suitable refurbishment materials。If you're not sure how to do this, you can consult a professional or ask a professional renovation team for help and guidance on rock excavation.

There are a few different ways to renovate old bathroom tiles:

Covering: You can cover old tiles and use materials such as marble and cultural stone for wall decoration.

Repaint: You can use special case paint to repaint the tile surface. This will be cheaper and more effective than replacing the entire tile.

Replacement: Another option is to replace the tiles at the end of the year. If you decide to do this, make sure that all the old tiles have been completely removed and replaced with new ones.

Paste background wall stickers: bathroom product manufacturers not only launched soft packaging composite, waterproof cabinets, but also launched a variety of different patterns of bathroom background wallpaper, because the background wallpaper style and technology have great advantages, plus simple operation is more popular with people, it is also very convenient to use.

Choose carefully based on factors such as your location, your needs, and your budget.

If you don't want to knock off the old tiles in the front of the guard, you can renovate them by spraying paint, choose your favorite hand spray paint, and then spray the tiles evenly on the sanitary repentance crack room after you come back.

There are basically tiles in every room in the home, and the bathroom is the place where tiles are used the most. The bathroom is the most frequently used place in the home, so the tiles in the bathroom will wear out after a period of use, causing the bathroom to look unsightly, so people will renovate the tiles. So how to renovate the old tiles in the bathroom?

Let's learn a few tricks together.

The tiles in the bathroom are easily covered with limescale because they have been covered with water vapor for a long time. In addition, the family frequently enters and exits the bathroom, and the dirt on the soles of the shoes will also remain on the tiles. When we renovate the bathroom tiles, we clean and treat the surface through a special decontamination paste, and the tile gaps should also be removed and re-treated, and then find the same color or the same style of tiles on the market, and replace the tiles that are more seriously damaged or cracked, which saves time and energy.

When the tile has been used for a long time, it is easy to dull the color or produce cracks on the tile. However, if the tiles are smashed and resurfaced, it is more troublesome, so how to renovate the old tiles in the bathroom to make it easier? The method is to paint the tiles with a special tile paint to make the tiles look like new.

Or buy a beautiful tile sticker and stick it to the tile, which will not only cover up the tile, but also add some highlights to the room because of its variety of beautiful patterns. Bring back.

Eradicating the old tiles and then laying new tiles is a great job to prepare for, people often do not know where to start in the face of this project, so how to renovate the old tiles in the bathroom to be simple and convenient? We can directly attach the new tiles to the old ones through some specialized renovation products. We only need to remove the dirt on the surface of the old tile, and then apply the tile paste to the old tile, and after the application is done, the new tile is directly covered on top of the old one.

How to renovate old tiles in the bathroom has always been a big problem that bothers people, but if you renovate the old tiles according to the above methods, you can spend the least amount of money and time to solve this big problem.

You can get it for free

The old house at home was renovated a long time ago, not to mention any style, the tiles on the ground do not look a little shiny, and there is a phenomenon of glaze falling off locally, I want to ask you how to deal with such a situation, in fact, the current renovation technology is very mature, the tiles do not need to be removed, the same can create a perfect ground, today Yixiu fast installation will recommend three methods of tile floor renovation to you, it really saves time and money to deal with, let's take a look at it together! Tile renovation

One of the ways to renovate the tile floor: put new tiles on top of the old tiles.

If the original tile at home is relatively thin, and feel that the eradication of the tile is time-consuming and laborious, you may wish to directly pave the new tile on the old tile, this practice is to brush the surface of the old tile with tile surface treatment agent, tile mosaic adhesive, and then the new tile is spread on the old tile, this construction method is simple and easy to operate, you can complete it yourself, no need to spend money to ask for labor;

The second method of tile floor renovation: lay wooden floors on old tiles.

I remember in the past, the old home renovation tile floor even if it is changed to a wooden floor, but also to remove the tile and re-level the wooden floor can be paved, the removal of tiles is not only time-consuming, laborious and costly, but also make the home dusty, really troublesome, but now there is a new way, directly on the tile to lay the wooden floor all the problems are solved, the tile floor has been leveled in the process of laying before, the use of tile mat can be well guaranteed the smoothness of the indoor ground, the wooden floor will be easier to lay, At the same time, it can also speed up the renovation process, and the important point is that it also saves a lot of labor costs for demolition and leveling.

The third method of tile floor renovation: laying floor leather on the old tiles.

If the old house is used for rent, the floor tiles are intact, but the color is not very good-looking, young people don't like it, and the cost of replacing it with wooden flooring is too high, at this time the floor leather is the best choice, the biggest advantage of the floor leather is that it is very simple to pave the steps, only need the tiles to be cleaned up, and then cut according to the size of the room, itself is with adhesive, and then paved, so that the floor leather is also paved, no need to hit the keel, and no need for glue, one person can do it, It's really hassle-free, and the renovation cost is also the lowest.

The above is to recommend to you three methods of old home renovation tile floor treatment, I hope to help you, there are many ways to renovate the old tile floor at home, you can choose the right method according to the ground situation of your home, and the renovation budget, and the above three methods do not need to spend money to ask the master, they can complete it, it is really worry-free, time-saving, and money-saving! That's all for today, and we will continue to update the knowledge about ground renovation in the future, thank you for reading!

How to calculate the area of Xi'an decoration brush latex paint, understand the calculation method of wall area in advance, and suffer less.

Water seeps into the wall of the living room in the corner of the bathroom, and the wall skin shows signs of falling off.

I don't want to smash bricks if the toilet leaks, what is the best way to fill the leak, teach you a few tricks to get it easily.