How to wipe the sticker, how to remove the sticker?

1. Use a hair dryer.

Principle: Rely on heat to remove self-adhesive.

Method: Use a hair dryer hot air gear, at a distance of about 10cm from the sticker, and blow directly with hot air; After blowing for a while, slowly remove the self-adhesive label while blowing.

Advantages: easy to operate, good effect, fast effect.

Disadvantages: It is not suitable for soft plastics that are not heat-resistant, and the high temperature can easily deform the object.

2. Save water with alcohol or pine.

Principle: Similarity compatibility principle.

Method: Use an alcohol-soaked rag to completely soak the part with the self-adhesive label, wait for a while, and slowly wipe the self-adhesive label from the edge to the middle with the alcohol-soaked rag until all the self-adhesive is removed.

Advantages: glass, stainless steel and other hard objects have good decontamination effect.

Disadvantages: Alcohol is not easy to obtain, and there is some damage to the skin of the hands.

3. Use wind oil essence.

Method: Completely soak the place with self-adhesive with wind oil essence, and wipe it off vigorously with a dry rag after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of wind oil essence, and then rub vigorously until it is wiped clean.

Advantages: Almost all items are not damaged, especially on printed and painted surfaces.

Disadvantages: Decontamination takes a little longer.

1. [Insulating oil] is the kind of oil in the transformer, which has a good effect on removing glue. Pour a little insulating oil on the solidified glue, and the glue will soften and remove quickly.

2. [Nail Purification] An occasional one. When sticking the shoes, the glue is all over the hands, and with the mood of trying it out, I pick up the nail polish cleaner and wipe it lightly with cotton, and the glue is washed off immediately. (Nail cleaner is easy to buy, also called nail polish remover, and cosmetics are sold everywhere.)

3. [Wind Oil Essence] Try it with Wind Oil Essence, the effect should be good.

4. [Gasoline] Soak some gasoline, rub it, and you're done.

5. [Banana water] The wood is stained with glue, and the banana water can be removed by scrubbing.

6. [Acetone] glue can be wiped with acetone after sticking, and it can be brightly dropped. (If a large area is stained with glue and coated with acetone, wait about 5 to 10 minutes to remove.) ）

7. [Warm boiled water] Bichi can also be dropped with warm boiled water bubbles.

8. [Freezing] It is said that if you put it in the refrigerator and freeze it, the glue will also fall off, so you can try it first.

9, [vinegar] vinegar removal method, the vinegar is evenly spread on the self-adhesive with a cotton swab, and after the vinegar is dispersed, scratch back and forth on the self-adhesive with a cotton swab, and the plum gum will peel off.

1. Chemical methods.

1) Wind oil essence removal method, with wind oil essence can remove self-adhesive paste. Apply wind oil essence (a little thicker) on the sticker, and wipe it off with a dry cloth after a moment of penetration, leaving no traces. If there is no wind oil, it can also be replaced by toothpaste, but the effect is slightly worse.

2) Hot towel removal method, you can first use a hot towel to cover a piece of adhesive tape, and when it is soaked, some identification stickers can be easily torn off. If it has a long time and strong adhesion, it can be removed with a special cleaning solution, such as asphalt cleaner. If you don't have these removers, you can also soak them in soapy water or laundry detergent water, which can also achieve a complete removal effect.

3) Hydrogen peroxide removal method, hydrogen peroxide can soften the adhesive that has hardened, the way to use it is to dip a towel in hydrogen peroxide, wipe it a few times, and it can be removed after about a minute.

4) Alcohol removal method, this method is similar to the hydrogen peroxide method, you can use a towel dipped in a small amount of alcohol to wipe it repeatedly.

2. Physical methods.

1) You can first cover the adhesive paper with a hot towel and soak it, and then use a blade to gently scrape it off when it is soaked.

2) Hair dryer method, use an electric hair dryer to blow the adhesive tape, and after the glue below softens, you can tear it off directly. This method is only suitable for adhesive tape that has not been applied for a long time.

Self-adhesive is most afraid of hot friction and high temperature, so it is easy to clean it if you grasp its weak point. Here's how to deal with it in a few different situations:

1. Glue a small area, and use the drawing eraser directly, but you must ensure that the eraser is clean, so that it will not stain the glass.

2. If it is a large area of viscose, after using the eraser, wipe it with a clean soft cloth dipped in gasoline or alcohol, and it is easy to wipe it clean.

3. There is another method that is relatively slow, but it is also very clean, that is, use a clean towel or soft cloth dipped in warm water or hot water (the principle is that the glue melts when heated), and repeatedly wipe and dip it several times in the adhesive place, the purpose is to soften the adhesive place, and then dip the towel in soap liquid (or washing powder, detergent can be), and wipe it repeatedly on the adhesive place; Finally, wipe off the soap foam with a warm and damp towel so that the glass is not only clean but also translucent.

In addition, some self-adhesive removers can be purchased on the market, and they are generally available in car beauty shops, so you can clean them there. If the solid wood floor is stained with self-adhesive, you can go to the auto parts city and buy something called "tar and asphalt cleaning agent", spray bottles, and wash off the self-adhesive. (Added:.)

Xylene wiping can also remove the sticker).

The answer can be answered first with vinegar. Because there is always white vinegar at home to clean the electric kettle, this time she first dipped some white vinegar with a dry rag and then completely covered the self-adhesive area to make it completely soaked. Wait 15-20 minutes, then use a scouring pad to gradually wipe along the edges of the self-adhesive.

This will have some effect, but not very quickly.

Secondly, alcohol can be used. Soak the rag in alcohol, soak the part with the self-adhesive completely, wait for a while, and slowly wipe the self-adhesive edge to the middle with an alcohol-laden cloth until all the self-adhesive is removed. This method is more effective in removing stains, but it will cause some damage to the skin of the hands, so it is best to wear rubber gloves.

Another method is to use a hair dryer to remove the stickers by heat. It can be blown directly with hot air at a distance of about 10 cm from the self-adhesive; After blowing for a while, slowly peel off the sticker along the edge towards the center while blowing. This is easy to operate, and the effect is good and fast.

If you want to remove the double-sided tape on the glass, in fact, it is the same as removing the sticker, and it can also be solved with a hair dryer. First of all, do not tear off the layer of paper that is stuck to the double-sided tape, use a hair dryer to blow hot air, and then carefully tear it off along the edges.

If you are not careful when tearing and leave black marks, you can use white flower oil or wind oil essence at home to apply some on it, and then wipe it off with a rag and wash it with water. If the black mark left on the pasted part is large, you can use industrial alcohol, apply it to the pasted area, and then wipe it clean with a cloth.

Self-adhesive can't be cleaned up? Just pour in a few drops of toilet water and teach you how to solve this puzzle with ease.