How do the tiny stones on top of the pot stick together?

Take you to play bonsai.

In the production process of landscape bonsai, due to the requirements of landscape performance mountain stone layout and mountain stone volume, it is often necessary to properly bond several, dozens or even dozens of smaller stones together to form a seamless single peak and mountains with layers of peaks.

Generally speaking, the bonding of mountain stones can be divided into two categories.

One is to bond several smaller stones with poor form up and down or a small amount left and right to form the main bee and the supporting bee in the landscape bonsai, which is mostly used in the landscape bonsai of the close-up landscape;

The other type is to bond together a plurality of stones with a certain landscape on the same horizontal plane to form a group of distant mountain landscapes, which is mostly related to the layout of the mountains and rocks and the performance of the vista.

The adhesives used to bond the rocks are cement (gray and white) and epoxy resin.

No. 307-1 unsaturated polyester resin. From the perspective of cheapness and ease of use, cement is mostly used in bonsai production, and the higher the grade of cement, the better. If someone uses industrial waste cinder to make a miniature bonsai, use gray cement as a glue.

In order to make the joints close to natural, the adhesive is mixed with pigments of the same color as the stone, such as iron oxide red.

Iron oxide yellow, chromium oxide.

Vanadium oxide, ink, etc., do not use colloidal dyes.

Such as advertising dyes and the like.

Before the stone is glued, the stone should be matched and laid out according to the landscape to be formed, the stone glue joint should be brushed, washed with water, and then glued with the prepared adhesive. In general, the more concealed the glue seam line, the better. In order to be close to nature, when the cemented mud is not dry, the stone chips of this stone can be coated at the joints.

After gluing, it is supplemented with other supports. The chemical rubber can be solidified and hardened in 24 hours, and the cement can be moved after half a day in summer and 1-2 days in winter. 3-4 hours after the cement is glued, you can use a knife and saw blade to gently scrape off the excess or polluted cement of the stone, and pull out the same texture as the stone at the joint.

The crushed stone sticks and sticks to make a flower pot.

1. First of all, we have to go outside to collect some stones, the surface should be rougher, and when it is fixed with glue, it will be more firm.

2. Then clean and dry the stones that you picked up home, prepare a few cans, remove the top of the cans, and use an awl to make a few holes in the bottom of the can to make drainage holes.

3. Use a hot melt glue gun to stick the stones to the can, and if you don't have the equipment, you can buy a 2 cents hot melt glue like Huahua, and use a lighter to help stick it.

4. If you are worried that the hot melt adhesive will not stick firmly, or if you want to stick to a large stone, it is best to use nail-free glue to stick it, so that the stability effect of the stone basin will be better.

5. According to the natural size of the stone, after all of it is glued, we can fill the can with soil and dig up some green plants and flowers in the field to plant them.

6. If you are leaning against the mountain, you can also dig some of this moss back and make a paving for the plant to make the stone pot look more primitive.

7. After planting, pay attention to placing it in a place of astigmatism, and wait for the plant to be slowly potted before normal maintenance. If you don't want to plant flowers, you can also pick up two branches and pine cones and insert them to make creative ornaments.

Crushed stone + cement, it is stronger to use.

1. Prepare a number of crushed stones (to pick up the thin ones), a disposable take-out box, mix cement and sand in equal proportions, add water and stir into a paste for later use.

2. Then stick the stone on the wall of the plastic box, and seal the gap between the stone and the stone with cement.

3. Paste all the stones to ensure that the top stones are on the same plane, and finally apply cement to the bottom of the plastic box, and remember to dig a hole in the middle for drainage.

4. After all the cement is dry, take the stone basin out of the mold.

5. What we get is the appearance of the semi-finished product in the picture below.

6. In order to make the pot more firm, you can use cement to hook the seam again outside the pot, and the finished pot should be soaked in vinegar water for 3 days before use to remove alkalinity.

7. Finally, we fill the soil in the finished stone pot and plant plants.

Stone flower pots, you can only make them with tools.

In addition to the crushed stone above, there are also flower pots made entirely of stone, but this pot can only be made with professional tools, and there is a certain amount of danger.

1. Select a relatively flat stone, install a 3cm hollow drill bit on the electric drill, drill a number of cross circles on the stone, and continuously cool it with water during the period.

2. Then use a hammer and chisel to knock off the stone in the middle little by little.

3. Then use an angle grinder to press the inner expansion wheel to polish the inner wall of the stone basin smooth.

The fine stones on the top of the hair basin are not glued to them. It is an analogy that is brushed with a paint-like adhesive and liquid and a stone.

Summary. It is good to put small white stones on the surface of the flower pot.

It is good to put small white stones on the surface of the flower pot.

The moisture in the flower soil will corrode the stone, will precipitate the minerals in the stone, and when watering, the minerals in the stone will carry the soil and become the nutrients of the flower.

Moreover, it can prevent the water in the basin from being dispersed and lost, and the body surface of the stone is cold, and when it encounters evaporated water vapor, it will quickly condense into small water droplets back into the basin. Another point is that it is more beautiful.

It has no effect on flowers.

Is it okay to lay small stones on the surface of the flower pot.

The only drawback is that if the paving is too thick, it will not be easy to find a shortage of water and drought.

It is good to lay small stones on the surface of the flower pot and have no adverse effect on the flowers.