What should I do if my phone falls into the water?

1. Rapid salvage.

If the phone falls into the water, you need to salvage it immediately, wipe it clean with clean toilet paper or cloth, and place the motherboard facing up during the wiping process to avoid a large amount of moisture flowing into the inside of the phone.

2. It is forbidden to turn on the machine.

Although the moisture on the surface of the mobile phone is wiped dry, there is still moisture in the host, and if it is turned on immediately, the motherboard of the mobile phone will be burned, so the mobile phone should not be turned on immediately when it is fished out.

3. Drying treatment.

Turn on the hot and cold air settings alternately on the hair dryer, align the opening of the mobile phone, such as the charging port, headphone jack, SIM card slot, etc., and blow it several times to evaporate the water inside the mobile phone, and then put it into the rice to dry it again.

Method 1: Dry with a hair dryer.

If the phone falls into the water, we need to get it out quickly, because the less water the parts in the phone get into the water, the shorter the time, and the less damage will be done. When we take out the mobile phone, we can find a professional to disassemble the mobile phone shell, and then use a hair dryer to dry the water in the parts, the temperature of the hair dryer can not be too high, otherwise it will also affect the mobile phone. When we dry the phone, cover the case, don't rush to turn it on, let it be a few days before you can turn it on.

Method 2: Put your phone in the rice.

If it is the kind of mobile phone that cannot be disassembled and the phone case cannot be dismantled to dry the parts, then we can only take the safest way, that is, put the mobile phone into a bag containing rice, bury the mobile phone in the rice, and let it absorb the moisture in the mobile phone after a few days to turn it on.

Method 3: Send it directly for repair.

If the above two methods have no effect, then you can only contact the mobile phone after-sales service or find a store specializing in repairing mobile phones, and send the mobile phone over for repair, whether it can be repaired can only be left to fate.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

What should I do if my phone falls into the water? If the mobile phone falls into the water, it should be turned off immediately, and the water inside should be dried to dry, and see if it can be used. If you can't die, you have to get a new phone.

Shut down in time: When the mobile phone gets water, first shut it down immediately to avoid the result of burning the motherboard; Remove moisture: First of all, you can quickly wipe it with a clean towel, and then use a hair dryer to dry the inside, pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature, and the time for the hair dryer to blow the mobile phone should not be too long.

Turn it off immediately, vigorously shake off the water contaminated in the cracks of the phone, and then use a hair dryer to blow it, it should not be a big problem.

If you are fast, you can wrap it in plastic wrap and let it sit in the refrigerator for 24 hours.

First of all, we score the situation, mainly as follows: falling into clear water when the power is on; Falling into non-corrosive liquids in the event of a power failure; Falling into non-clean water when the power is on, or falling into corrosive liquids or liquids or other clean liquids regardless of whether the power is applied or not. <>

The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. Of course, if you are unlucky, PPC will also be bad if you put it in your pocket. The biggest problem after PPC water ingress is how to deal with it.

First of all, for the 1st and 2nd cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately.

For the first situation: falling into clean water when the power is on, this situation generally does not need to be disassembled.

1 Power off as soon as possible.

2 Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3 Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. If you use a hair dryer, it is recommended to use the natural cool breeze of the hair dryer and try not to use very hot wind.

After these three steps of processing, the power supply can basically work normally.

For the second condition: falling into a non-corrosive liquid in the event of a power failure. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.

1 Shake dry vigorously, but don't shake the machine off.

2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.

3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

For the third condition: falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquid regardless of whether the power is on or not.

This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4 Clean with alcohol or professional washing water.

5 Assemble. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

After scooping it out of the water, immediately wipe the surface of the phone dry with a dry paper towel, rag or even clothes, take out the SIM card slot, and use a paper towel to absorb water at each opening of the phone. Remember, don't press buttons such as the power button and volume button, don't turn on, don't turn on, don't turn on, this is the most important point, because once turned on, due to the water in the body, connecting the power again will cause the motherboard to burn out.

After the mobile phone falls into the water, it is best not to blow it with a hair dryer, because the hair dryer blowing is, it will cause the moisture inside the mobile phone to move, which may cause greater damage to the mobile phone, and if it is blown with hot air, it will have a certain impact on the mobile phone screen.

The best way is to go to the repair shop to disassemble and dry [smile] [compare heart] [compare heart].

Answer: The mobile phone should be fished out immediately if it falls in the water, get rid of the water in time, turn it off immediately, and put the mobile phone in the middle of the rice, because the rice has the effect of absorbing water, so after 24 hours of isolation, take out the mobile phone and turn it on.

If the phone falls into the water, you should immediately take the phone out, then wipe it clean with a clean cloth or paper, wipe the external surface, and then turn it off and put it in a ventilated place for ventilation, and then go to the after-sales service.

If the phone is not waterproof, it should be turned off directly after taking it out of the water. If you can open the back cover, it is best to unplug the battery cord to prevent short circuit. To observe the water intake of your mobile phone, consider using a hair dryer or something like newspaper to wrap the water in the steam.

Sometimes if it's light, it's okay to dry it for two days

It should be turned off in time, immediately blow it with a hair dryer, so that the water inside evaporates, and then turn on the machine after the water in it evaporates, if it doesn't work, take it for maintenance.

Take it out quickly to control the water and dry, and don't turn it on immediately.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake your phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by a hair dryer, etc., it may penetrate into other components of the screen, which will cause the mobile phone to get wet and damage the electronic components).

Introduction: I believe that many people have had the experience of dropping their mobile phones into the water, such as putting them in the washing machine with their clothes, falling into the toilet, etc. So how to deal with the situation that the mobile phone falls into the water? Let's take a look with me!

Step 1: Fish out your phone

After the phone falls into the water, take the phone out of the water as quickly as possible, the longer the immersion time in the water, the more serious the phone immersion will be.

Step 2: Remove the battery

After the mobile phone is fished out of the water, it is best not to press any keys or turn it off, take out the mobile phone battery in time, and do not charge or turn on the mobile phone, which can easily cause a short circuit and burn out the internal components of the mobile phone. And for the data loss of the mobile phone SIM card and mobile phone memory card, after removing the battery, you can also take out the SIM card and SD card, and the mobile phone card will be damaged if it is soaked in water for too long.

Step 3: Wipe dry

After removing the battery, place the mobile phone screen horizontally downward, and then gently wipe it with a clean cloth or paper towel or use a paper towel to stick the water on the mobile phone, minimize the shaking of the mobile phone during the wiping process, and pay attention to the best not to shake the mobile phone, which is easy to make the water enter the internal parts.

Step 4: Drying

1. Put key parts such as mobile phones and batteries into the rice for 24 to 36 hours, or even longer, and use the strong water absorption function of the rice to absorb excess water in the mobile phone. However, be careful not to use finely chopped rice, as the rice will also get into the inside of the phone.

2. Wrap the phone in a cloth or tissue for a few minutes to create a small "vacuum effect" and absorb too much water.

3. After wiping the moisture on the surface of the mobile phone, if you are not in a hurry to use it, you can place it in a dry and ventilated place and wait for it to dry naturally.

4. Wipe the mobile phone with anhydrous alcohol, the alcohol volatilizes relatively quickly, and the water on the circuit board can be volatilized and taken away.

Step 5: Repair and processing

Generally speaking, if the water ingress is not serious, after the above few steps, the battery can be installed and turned on after the mobile phone is dried. However, if the water ingress of the mobile phone is serious and the water ingress is relatively long, it still needs to be sent to the repair center for professional processing in time.

Precautions

2. After the mobile phone falls into the water, be careful not to shake the mobile phone vigorously, which may make the water in the place where there is no water.

3. After the mobile phone falls into the water, it is best not to disassemble the mobile phone casually in order to blow more water, which may cause more damage to parts, and most repair shops are reluctant to take over the repair of the disassembled mobile phone.

4. When the mobile phone is dried, it is not recommended to dry it in the sun, which may make the mobile phone more seriously damaged.

5. After the mobile phone falls into the water, it is not recommended to use a hair dryer to blow, when the hair dryer blows, the water inside the mobile phone will move inside, which may cause damage to the inside of the mobile phone, and if the hair dryer uses hot air, it is easy to hurt the mobile phone screen, which will seriously lead to deformation and leave water ripples on the screen. If you must use a hair dryer, be careful to keep a certain distance from the dryer.