What should I do if my mobile phone falls into the water, and how to deal with it quickly if my mobi

After the mobile phone is dropped in water, the water may enter the circuit board and cause a short circuit in the mobile phone circuit, which will affect the use or even be scrapped. Therefore, the phone should be removed from the water as quickly as possible after entering the water, and be careful not to cause the phone to produce a large acceleration, because this is likely to cause the water to enter the circuit board along the gap. After removing from the water, quickly open the battery cover and remove the battery, that is, cut off the power supply to avoid a short circuit.

Use toilet paper or cloth and other materials with good water absorption performance to absorb the water on the mobile phone, and put the mobile phone in a dry place for five to ten minutes to let the water on the mobile phone dry fully. Finally, put the battery on and turn it on.

The phone is in the water, and after picking it up immediately, don't press any keys Directly disassemble the back cover and deduct the battery (because if you don't turn off the power first and press the button, the entire motherboard will be scrapped directly because of the passage of current) Then take a hair dryer and dry it quickly If you have the ability, take it all apart Clean all the keys on the motherboard with a toothbrush and then install the battery Anka Power on OK

Turn off immediately, if it is better to turn off automatically, open the phone cover, take out the battery, and use toilet paper to absorb the water first), and then put it in a ventilated place to dry (estimated to take at least a week), do not put it in the sun, and do not use a hair dryer to blow.

Unplug the battery and blow dry.

If you can, you can remove it and wash it with alcohol.

Don't press the buttons, if you press the buttons, the motherboard may burn. Buckle the battery and disassemble it, clean it with alcohol, and then blow dry and put it on.

Use a hair dryer to dry the inside, and then take it out to repair.

If the phone has fallen into the water, it is advisable to take some immediate measures to reduce the damage as quickly as possible:1Shutdown:

When the phone is wet, turning it on may cause a short circuit or other problems, so turn it off at the first time and try not to use the phone. 2.Remove the battery:

Remove the battery if possible. If you have a phone with a non-removable battery, you can turn it off or force it to be powered off. 3.

Wash your phone: After taking the phone out of the water, gently wipe the case and surface of the phone with absorbent paper or a soft closed cloth to remove the moisture on the surface of the chain. Be careful not to rub too hard to avoid water entering deeper areas.

If it's salt water, you can wipe it with fresh water. 4.Blow dry:

Use a hair dryer (not too strong) to dry your phone, don't aim it directly, keep a certain distance, and blow hot air. 5.Leave for at least 24 hours:

Leave your blow-dry phone in a dry, ventilated place for at least 24 hours to allow the moisture inside to evaporate. You can put your phone in a bag and add some moisture-absorbing items such as moisture removers and desiccant. 6.

Don't use strenuous tools to disassemble the machine! 7.If you are worried that your phone is damaged by software, you can reset it after your phone comes back to drying.

It should be noted that the above measures do not guarantee 100% repair of the phone, but it can effectively reduce the damage of the phone when it is flooded. If the phone still cannot be used normally after treatment, it is recommended to contact the after-sales customer service of the hand cracking machine for repair.

When the phone falls into the water, you can avoid further damage to the phone through the following quick treatment measures of Shinyeshan:1Immediate shutdown:

Press and hold the power button of the mobile phone to turn off the mobile phone, prohibit it from turning it on, and avoid current damage to the circuit. 2.Remove the case and remove the battery:

Remove the phone case and quickly remove the battery to prevent short circuits, damage to the circuit board, and other problems. 3.Wipe dry:

Gently dry the surface of your phone with a soft towel or paper towel, and do not use a high-temperature tool such as a hair dryer. 4.Put in desiccant:

Place your phone in a box or airtight bag and put some desiccant, such as rice or silicon degranulating, to absorb moisture from the air. 5.Never use high-temperature tools such as hair dryers to speed up drying:

This practice may cause the vapor from the water to not be able to escape from the phone, which can aggravate the damage. 6.Finally, hurry up and send it for repair:

Even if the mobile phone can operate normally after the above treatment, you should go to the mobile phone repair service center as soon as possible to check whether there are any hidden dangers.

First of all, let me explain that now mobile phones are basically all-in-one machines, the sealing is very good, and the mobile phone falls into the water, as long as it is handled properly, there will be no problem.

Here's the thing.

I haven't fished for a long time, so I went fishing to relax yesterday when I had time off.

Fishing and fishing only heard a coo, I followed the sound to look,, it turned out that my mobile phone slipped out of my trouser pocket, the whole person was stunned, the water is relatively deep, and I can't see the bottom at all.

An uncle next to him saw it and said: Hurry up and get into the water!

But I hesitated, because I had already noticed that there were several Fushou snails crawling in the water, and that guy was so big that I was a little afraid to go into the water.

It suddenly occurred to me that I could use a fishing net, but when I came, I didn't bring it with me to save trouble, so I had no choice but to run home to get it, and my phone was soaked in the water.

It took about ten minutes to get the net back and forth, and there was still a glimmer of hope in my heart at that time, but I thought about how it could still be used after soaking in water for so long.

After taking the net, I slowly looked down the phone along the place where the phone fell into the water, when I hit a hard thing, I scooped it up, and saw that it was really a mobile phone, I wiped the outside moisture and mud with a paper towel, and then wiped the process, the mobile phone screen lit up, I was overjoyed, and quickly and long press the power button to turn off the mobile phone, in case of a short circuit and burned the motherboard.

Thankfully, my phone is still working fine!!

Next, I will make a summary of my handling process, hoping to help friends who accidentally fell into the water.

1.After picking up the mobile phone, use absorbent paper to absorb the water as soon as possible.

2.If the phone is still on, turn it off immediately to prevent the circuit from short-circuiting and burning the motherboard.

3.Don't shake the phone too hard to try to throw out the water inside, which will throw the water that has not yet entered the motherboard, causing a short circuit on the motherboard, and the gains outweigh the losses. (That's what I made).

4.After the above steps are processed, we can disassemble the phone shell and see the situation inside (if you are not sure about the disassembly, you will finally hand it over to the master of the professional mobile phone to do), I dismantled it myself, search for the disassembly tutorial of my mobile phone model on the Internet, and then disassemble the installation steps step by step.

5.If there is water in it after disassembly, wipe it dry with absorbent paper (there was basically no water in it at that time, only a few water droplets).

6.After wiping dry, you can use a hair dryer to blow it, but don't turn it on too hot, as the high temperature is easy to burn out the internal components.

7.This is the best time not to try to turn on the machine, it is best to leave it for 24 hours, (at that time, I saw that some netizens said that if you put it in a rice box, the rice can be used as a desiccant).

8.It's best to unplug the battery cable, because if the phone has an alarm clock, it will automatically turn on when the time comes, if the water in the phone is not handled well, and the result is turned on, then the cup is set (at that time, the phone set an alarm clock at 23 o'clock in the evening, and it turned on in the middle of the night, but it was okay).

If you are using a vivo phone, you can check the following mobile phone liquid inlet treatment methods:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to absorb the water in the gaps; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

What should I do if my phone falls into the water?

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair.

Precautions after water and liquid ingress in the mobile phone:

1.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

2.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

3.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Repair spare parts** inquiry.

Make an appointment for service. Repair services.