-
Anonymous users2024-02-12Precautions: 1. Before installation, go to the site to check whether there are conditions to install the keel, whether the site wall is completed, whether the carpentry part is qualified, and the plastering part needs to be completed first.
2. The site conditions permit the party to enter the site for construction, first of all, according to the requirements of the drawing design of the carpenter to fix the aluminum alloy keel keel, pay attention to the angle must be flat and smooth at right angles, and the connection should be flat and dense.
3. Pay attention to the light stand, tuyere, and light pipe disc should be at the level of the surrounding keel, and should be firm and stable and not swing.
4. Smoke detector and ceiling lamp, first position and then make a wooden underframe, the bottom surface of the wooden underframe should be polished smooth, and pay attention to the horizontal height, too low is easy to highlight the traces of the underframe.
5. Before installing the ceiling, carefully check whether the keel joint is firm and smooth, the sprinkler head should be glued with white tape, and the tuyere should be handled well.
6. When installing the ceiling, it should be fixed from the middle to both sides, and at the same time pay attention to the size of both sides, pay attention to the welding seam to be straight and make the corner at the end, and pay attention to the smooth and smooth. After the four weeks are done, trim and remove the excess ceiling. Achieve the perfect edge closure.
7. The position of the lamp hole should be marked, and the PVC lamp ring should be carefully and accurately glued to the bottom surface of the soft film, and the extra ceiling can be removed after it is firm.
8. The treatment of the air outlet and the light pipe disc is to find the position of the light pipe disc of the air outlet, and install the soft film on the aluminum alloy keel as around, and pay attention to the flat corners. When done, the extra smallpox can be removed.
9. Finally, clean the surface of the soft film ceiling with a clean towel.
-
Anonymous users2024-02-11In fact, it is an interior decoration material imported from abroad, which can create a more dreamy visual sense, so it is suitable for relatively large occasions.
What are the precautions for the construction of ceiling soft film ceiling?
Ceiling soft film ceilingConstruction Precautions- Before installation, please come to the site to check if there is a condition for installing the keel. Regardless of whether the wall is finished or not, whether the carpentry parts are qualified or not, the plastering part needs to be completed first. Special attention must be paid to the carpentry part must be made according to the requirements of the lamps, air outlets reserved.
Ceiling soft film ceilingConstruction precautions - The site conditions allow the party to enter the site for construction, first of all, according to the design requirements of the carpentry part of the fixed aluminum alloy keel, pay attention to the corner position must be flat and smooth, and the connection should be flat and dense.
Ceiling soft film ceilingConstruction precautions - pay attention to the level of the light stand, tuyere, lamp tube board and the surrounding keel, and require that it must be stable and cannot swing.
Ceiling soft film ceilingConstruction precautions - ceiling lamp, first place a wooden chassis, the bottom of the wooden chassis should be polished smooth, and pay attention to the horizontal height, too low will expose the traces of the chassis.
5. Soft film ceiling of the ceiling Construction precautions - Before installing the ceiling, carefully check whether the keel joint is firm and smooth, the sprinkler head should be pasted with white tape, and the air outlet should be properly disposed of.
Ceiling soft film ceilingConstruction Precautions - Ceiling Soft Film Ceiling Construction Precautions - When installing the ceiling, first fix it from the middle to both sides, and pay attention to the dimensions of both sides. Pay attention to the angle of the weld and pay attention to the smoothness. Once the perimeter is finished, remove the additional ceiling.
Achieve the beauty of the edge effect.
Ceiling soft film ceilingConstruction Precautions - Open the light hole and make a mark at the light hole location. Carefully and accurately attach the PVC light ring to the underside of the soft film. Once solidified, remove the extra ceiling.
Ceiling soft film ceilingConstruction precautions - open air outlet, light pipe disc processing need to find its position, and the surrounding practice is the same, the soft film is installed on the aluminum alloy keel, pay attention to the corner position should be flat. When you're done, just cut off the useless.
Ceiling soft film ceilingConstruction Precautions - Clean the soft film ceiling surface with a clean towel. Soft membrane ceiling has the advantages of fire prevention, antibacterial, waterproof, energy saving, environmental protection, anti-aging, easy installation, etc., and has become a leader in indoor ceiling materials.
The installation of soft film ceilings gives your home a "small sky" colorful world.
First, now in the interior decoration ceiling project, most of the use is a suspended ceiling, first of all, we should pay attention to the selection of materials, and then we must operate in strict accordance with the construction specifications, when installing, the position must be correct, and the connection is firm. The decorative materials used for ceilings, walls and floors should be non-combustible or flame-retardant materials, and wooden materials are flammable, so they should be fireproofed. Lighting, air conditioning and other electrical pipelines are generally laid in the ceiling, and they should be operated in strict accordance with the specifications to avoid fire hazards. >>>More
1. Earthworks.
1. Earthworks should not be constructed in winter, if they must be constructed in winter, the construction method should be determined after technical and economic comparison. Before construction, it should be carefully planned and prepared to achieve continuous construction. 2. When the earthwork is excavated by the anti-freezing method, it can be covered with insulation materials or the topsoil can be ploughed and raked loosely before freezing, and the ploughing depth should be determined according to the local climatic conditions, generally not less than 30 cm. >>>More
1. The rafting period is from April to October every year, and the rafting activity period in the central region is slightly shorter than that in the southern region, and changes with weather and hydrological conditions; >>>More
The key points of apartment soft decoration design: 1. Although the apartment is small, the functional planning is the most testing of the designer's level. 2. A good soft decoration designer makes the storage function and functional partition perfect. 3. In terms of style control, it is simple and comfortable, without losing the design details.
Heating construction, not a professional master, please do not easily install or transform the heating, the current 90% of the accident is due to improper installation and construction, not the heating itself, self-installed heating, accident hidden dangers are difficult to avoid. In order to avoid the risk of informal installation, the following points should be paid attention to when heating construction: >>>More