Precautions for heating construction, what are the precautions for installing heating?

Heating construction, not a professional master, please do not easily install or transform the heating, the current 90% of the accident is due to improper installation and construction, not the heating itself, self-installed heating, accident hidden dangers are difficult to avoid. In order to avoid the risk of informal installation, the following points should be paid attention to when heating construction:

First, the purchase of heating products is best to buy brand heating from a regular seller, and by the certificate of competence, and sign a warranty contract.

Second, it is best not to use undocumented, no quality assurance of the guerrilla installation, the use of installation guerrillas after the installation of the quality and safety hazards are heavy, the company must install heating with it to sign a contract, the contract to write the after-sales maintenance terms, to avoid the occurrence of water leakage or bursting and other serious accidents in the future can not find the responsible person and consider themselves unlucky.

Third, it is best not to find acquaintances, decoration construction guerrillas or installation guerrillas on the street installation, because the heating installation has a certain technicality, experience and operation is very strong, non-professional installation unions will be used in the future to bury the hidden dangers of accidents, once an accident occurs you may not even find someone let alone maintenance, the gains outweigh the losses.

Fourth, after the installation of the heating, the installation unit must be required to do a pressure test, and the pressure is generally not lower than the kilogram. In view of the new heating modeling is becoming more and more complex, personalized, its pipe fittings, accessories and installation technology are becoming more and more standardized, matching, the current general installation means and accessories can not gradually meet the installation quality requirements of brand heating, therefore, the above approach is only the current stage of expediency, the safest is still factory, standardized installation, that is, the use of manufacturers' special accessories, professional technology, standard quality standards.

1. The slope of the pipeline cannot be reversed; 2. At the reducer of the pipeline, according to the different heating mesons, the pipeline should be flat at the top or at the bottom; 3. At the turning point of the pipeline, the stamping elbow shall not be used, and the bend shall be simmered;

Most homes install radiators to keep warm in winter. Some of them frequently leak water and the radiator is not hot during use, which not only causes harm to their own homes, but also harms their neighbors who go up and down the stairs. What's even more annoying is that some manufacturers do not have the corresponding after-sales service, and the user can only carry the problem by himself, and the loss is borne by himself, and even more, some manufacturers have long disappeared, so that people do not even have a place to vent.

So, what are the precautions for installing heating? Let's follow the golden flagship flag brother to find out.

In order to avoid the above situation, we have to choose a radiator suitable for our own use when installing, and pay more attention to some installation matters, so as to take precautions and prevent problems before they occur.

1. Understand the quality of heating water in advance.

Heating conditions are more complex, the heating water quality is different, the radiator suitable for use is different, if the oxygen content in the water quality is high, the home is not suitable for the installation of general steel radiators, but should use copper-aluminum composite or other radiators that have also done internal anti-corrosion treatment.

2. Try to choose products from well-known brands and large enterprises.

Radiator is a special building materials product, related to the future heating quality and family property safety, from the product quality and performance considerations should try to use domestic well-known brands and enterprise products. Moreover, the use of radiators is generally ten or twenty years, and the cost performance is quite high, so there is no need for consumers to buy miscellaneous or unbranded products in order to save a little money, and ignore the quality of the products.

3. Be sure to sign a contract when purchasing.

No matter how much the manufacturer promises, it is all verbal, and the interests of consumers cannot be guaranteed. When consumers buy, they must sign a sales contract, which states the responsibility that the manufacturer should bear, and in case of an accident, they can claim compensation by virtue of the contract. According to industry sources, it is best to choose those manufacturers who are insured in formal insurance companies, so that consumers can really buy with confidence.

Fourth, the installation accessories should be selected from the original parts.

When buying a brand of radiator products, it is best to choose its accessories at the same time to prevent the occurrence of mismatch during installation, and if you choose to install other brands, it is not easy to define the responsibility if there is a problem.

Fifth, you should choose a company with professional qualifications for installation.

Heating is a complete system, there is a certain technical content, most people do not have the corresponding technology and tools, easy to unreasonable design, improper operation of the situation, buried a lot of hidden dangers of accidents. Therefore, it is more appropriate for users to find a professional company or team with installation qualifications when installing, and they will send professionals to install and maintain.

The radiator configuration must not be randomly matched.

At present, the heat of general home heating is calculated according to 120 watts per square meter, according to this standard, we can calculate the heat required by the whole room and the whole house, and then choose the appropriate radiator according to the required heat value. Radiators from different manufacturers should not be mixed, because the materials are different, which will cause the heating time to be out of sync and increase energy consumption.

The orientation of the radiator cannot be arbitrarily arranged.

For the position of the radiator, it will not only have a certain impact on the aesthetics of the overall decoration, but the most important thing is the impact on the heating heat dissipation function, so it is recommended that you install the radiator under the bay window, which can dissipate heat quickly and ventilate.

The use of heating in winter has become the first choice of consumers, and every winter heating period, the heating installation will be hot, bringing people the warmth and comfort they expect, so that the whole winter is as warm as spring. In order to ensure the use effect and enhance the safety of use, the following seven common problems need to be paid attention to when using heating in winter. Let's follow the golden flagship flag brother to find out.

1.Heating is not only heating equipment, but also a container with a certain water pressure, if the product quality is not up to standard or the system design is unreasonable, it is easy to cause the radiator to leak or even burst, bringing corresponding economic losses to users. When decorating the interior, the user should not remove or add heating equipment at will, nor change the installation position of the radiator, so as to avoid destroying the original balance of the system and causing unnecessary trouble.

2.In the heating process, if it is found that the heating pipe or radiator is leaking, you can take emergency measures: close the control valve of the pipe section, close the water supply and return valves on the radiator, and ask professional and technical personnel to repair it at the first time.

3.Enhance the heat preservation of the room. In winter, the indoor warmth is not up to standard, and a large part of the situation is due to the poor insulation effect of the house, the airtightness of the room is not strong, and the heat emitted by the heating is emitted from the gaps in the doors and windows or the wall without the insulation layer.

The most effective way to solve this problem is to ensure that the warmth measures are in place, such as adding sealing strips to doors and windows, replacing thick curtains, etc.

4.After the heating starts, it needs to store heat for a while for the heated room to heat up. This is mainly because heating is a huge project, and the hot water temperature and system pressure are slowly rising, and it is impossible to meet the specified requirements in a short time.

During this period, heating users need to pay attention to whether there is water leakage in the heating, and if they can't solve the problem, they should notify professionals in time for on-site maintenance.

5.After heating, if there is a single radiator or a single pipe that is not hot, you can debug and troubleshoot according to the following methods: adjust the valve of each heating riser to a suitable position; Open the manual exhaust valve at the end of the radiator to expel the air accumulated in the radiator; Open the exhaust valve of the gas collection tank at the top of the system to exhaust the air inside.

Do not open and close the valve after commissioning, and do not discharge the water in the radiator at will.

6.Do not move the heating pipe valve. The heating system is a systematic project, with a certain technical content, and the general construction team will be debugged when installing to ensure that each group of radiators can be evenly heated.

Therefore, users should not close and open the various valves on the heating pipes at home, especially when they have no experience in use for the first time.

7.Avoid using radiator hoods. There should be enough space for heat dissipation at the upper end of the radiator and around it, and no debris should be piled up or a heating hood should be installed.

The radiator heat dissipation uses the principle of hot air, relying on radiation and convection to heat the surrounding air, and gradually raise the room temperature. Some data show that the installation of a heating hood will affect about 20% of the heat dissipation, so it should be avoided as much as possible to affect the heating quality.

The five precautions of home heating should be kept in mind, and the family that uses radiators to warm the old cover can do the following simple inspection and prevention work to ensure the safety of daily use.

1. Air leakage prevention: self-inspection is carried out once every two months, and the gas hose is replaced at least once every two years.

2. Anti-freeze cracking: When the boiler is not used in winter, the boiler should be set in an anti-freeze state.

Three anti-blockage: Before use, check whether the coaxial flue is blocked or not.

4. Prevent disassembly: Do not alter natural gas pipelines and facilities.

Five-proof high temperature: room temperature 18 -22 is appropriate.

1.Do not dismantle the heating facilities without authorization.

2.Before heating, users can not disassemble and change the heating equipment at will, carefully check whether the heating equipment is leaking before use, and should be repaired in time when there is water leakage.

3.If the radiator is leaking, you can use a rag and other items to block it to avoid the loss of hot water, if the leakage is serious, you should find a professional to repair it.

4.Do not accumulate debris on the radiator.

5.Many families will place items on the radiator, or decorate the radiator, in fact, these practices will affect the heating effect of the radiator, and it is not conducive to heat dissipation, and accidents such as fire in the house.

6.Deflation in time.

7.Usually after the heating starts, the air plug will cause the problem of the heating is not hot, if the heating is not hot, you can open the air release valve of the radiator to drain the air in the pipe, so as not to affect the heat circulation in the pipe.

8.Pay attention to water leakage.

9.Before the heating is officially used, the heating will be pressed and tested, mainly to check whether the heating will leak, if the heating has a water leakage problem, you should contact the heating company in time, they will help deal with it.

10.It should be noted that when testing the water, it is necessary to carefully see whether the radiator and valve are loose and aging, otherwise there will be water leakage.

11.Do not take heating water.

12.Heating mainly relies on the hot water in the heating system to achieve heating, so heating water cannot be used, otherwise it will cause a lack of water in the heating system, resulting in the inability to provide heat.

13.In addition, there are many chemical agents in heating water, and if they are used in daily life, it will affect people's health.

After entering the heating stable period, there are a lot of precautions for the use of radiators, and only by doing these can we have a healthy, comfortable and warm home environment, so as to ensure that people have a high-grade home life enjoyment. Let's follow the golden flagship flag brother to find out.

Heating water is harmful to health and should not be used indiscriminately.

Radiator Some people connect the faucet privately on the radiator, and release the heating water for wiping the floor or flushing the toilet, etc., this kind of behavior is harmful to people, and it will affect people's health, in order to prevent the heating system from corroding, reduce the blockage accident, generally in the heating water will increase chemical agents, if people take such heating water, it is possible to cause direct harm to the human body.

The radiator presents the phenomenon that the first few pieces are hot and the last few pieces are not hot, and the orange brigade may be formed by the "air blockage" of the radiator.

Solution: Loosen the air release valve at the upper end of one side of the radiator, stop the operation of the round crack stool after hearing the sound of gas release, and tighten the air release valve after the water flows out. It usually takes a few times to repeat the operation and the heating will heat up.

If the radiator is not hot after exhausting, you should ask a professional to find out the cause and do not blindly drain the water.

Deflating the radiator at will has potential safety hazards.

Although the heating has entered the heating stable period, some users still feel that the radiator at home is not hot enough, and will release the radiator from time to time, but this practice is very undesirable, because the exhaust valve is small in size, compact in structure, fragile and easy to break, if it is twisted frequently, it is easy to affect its sealing effect, resulting in water leakage at the interface between the exhaust valve and the radiator.

The style and color of the radiator depends on the style of the home.

Now, a variety of home decoration styles elegant bloom, European classicism, modern minimalism, American pastoral style, Chinese classicism, etc., fully meet people's distinctive personality and radiator ten brand fashion needs, radiator as an important part of home decoration, but also without exception to assume the responsibility of home decoration, if you like European classical style, steel cylindrical radiator will be a good choice, if you like simple European style, copper aluminum composite radiator is your best choice.

Home heating is a complex system engineering, will be affected by multiple factors, if the water quality of the heating system is poor, it is necessary for users to pay special attention to the internal anti-corrosion treatment of the radiator, if the external environment of the radiator is poor, it is necessary to consider the painting process of the radiator.

The purchase of radiators must first match the area of the heating house, and at present, the heat dissipation of different brands of radiators is not the same"tablets"or"groups"When users buy, they must know the purchase amount only after scientific calculation based on their own house type and area.