How to use the most gas saving wall hung boiler? How about the heating effect of a wall hung boiler?

If you want to save gas in the wall-hung stove at home, don't turn off the electrical appliances and heating at home after going out, like some people will have a habit of turning off all the electrical appliances at home, thinking that if it is turned on, it will cause a relatively large waste, in fact, if you turn it on after going home, it will cause a lot of waste of gas in a heating mode, so you can adjust the temperature to the appropriate temperature in advance. At the same time, it is also necessary to clean the wall-hung boiler regularly, because the wall-hung boiler will produce some scale in it after a long time, which will lead to some energy digestion and shorten the service life of the wall-hung boiler, so it is necessary to do a good job of cleaning the function regularly, so as to prolong the use time of the wall-hung boiler and improve the energy-saving effect. The heating effect of the wall-hung boiler is still very good.

Wall-hung boilers are very popular in many homes to meet their daily hot water needs and warm up their homes during the winter months. Normally, when using the wall-hung boiler, if you go out for a short time, you can turn down the temperature, do not turn off the wall-hung boiler, and you can turn off most of the thermostats when you go to work, as long as you can ensure a certain temperature operation. Usually when the temperature is turned on, the temperature should not be too high, because it is very easy to cause energy waste, and it will also cause some uncomfortable symptoms of the human body, which can be kept at 18 to 20 can make the human body feel very comfortable, and can also save a certain amount of energy.

The wall-hung boiler at home can be turned on after being installed by plugging in the power supply to use hot water and heating, and it is best to keep the wall-hung boiler on at ordinary times, not to close it for a while, open it for a while, in fact, this is not conducive to maintaining the indoor temperature. If the home is relatively large, each room is installed with radiators, in order to save gas can be divided into rooms for heating, mainly arranged in the living room and their own bedroom, you can also observe the pressure display on the wall-hung stove, the general pressure should be within the normal range.

Finally, the wall-hung boiler has very high requirements for the thermal insulation of the room, if the insulation effect is not good, it is very easy to waste energy, and it will also increase the amount of gas naturally, so you have to do a good job of insulation.

In the process of using the wall-hung boiler, it is necessary to pay attention to the indoor heat preservation in order to save gas. During use, do not open the doors and windows frequently, otherwise the indoor hot air will flow to the outside, and the outdoor cold air will enter the room, resulting in the phenomenon of unstable temperature, and the wall-hung boiler will continue to heat, which is a waste of gas. The heating cycle is more flexible.

Most of the time of central heating is November 15 of each year - March 15 of the following year, and generally cannot be changed at will. However, with a wall-hung boiler, the heating mode can be turned on at any time. The heating period can be adjusted.

The time period of central heating is basically fixed every day, sometimes there are people at home, but the heating temperature is not qualified, and there are time periods when there is no one at home, but the temperature is very high. The heating temperature is adjustable.

You can keep the temperature at a certain level, or turn off the radiator in the room and clean the hanging fireplace regularly, which can save gas. The heat preservation of the room is relatively good, the temperature can be maintained, and the natural gas can be saved, and the heating effect is good.

If you use it often, leave it open all the time, option 21 is the best, you can install double-glazed windows in your own home, and seal the doors and windows well; The heating effect of the wall-hung boiler is still very good, which can meet the needs of the family.

1. Adjust the valve according to the dosage.

If the area of the house is large, but there are few people, then you can go directly to the valve to adjust it a little smaller, no one lives in it, and it can also be sent out directly, so that the heating area is smaller, the amount of natural gas consumption is reduced, and it is also very useful to increase the temperature of the small area, and the heating effect will be better.

2. Reduce start-up time.

This heater gas consumption is high at the time of starting, so the shutdown and start are reduced as much as possible, and if no one goes home for a few days, it is better not to turn it off, but the valve adapts to the low temperature performance, the consumption of this gas is smaller than at the beginning, and the inside is not icy.

3. Clean up the scale regularly.

Many people find that when they first use the wall-hung gas boiler, the consumption is relatively small, and the effect of the heating system is particularly obvious, but after a long time, it is found that the effect of the same consumption is greatly unsatisfactory, which is caused by scale.

In view of this situation, it is necessary to ask professionals to clean, especially the scale in the underground pipes and radiators should be cleaned, so as to improve the heating effect and prolong the service life of the system.

Gas wall-hung boiler, also known as gas heating stove, is a kind of heating and hot water equipment with natural gas (there is also a small amount of liquefied gas wall-hung boiler and artificial medium heating furnace) as the main energy source, many areas and families without central heating will choose gas wall-hung boiler, some people do not know how to use wall-hung boiler to be more efficient and gas-saving, let's talk about the use of gas wall-hung boiler.

1. Check the work before starting

Check whether the gas type is consistent with the wall-hung boiler label.

Check that the heating pipes and radiators are well connected.

Check that the gas is connected and the valve is open.

Make sure the wall-hung stove chimney is connected and leads to the outside.

Don't plug it in just yet.

2. Water injection and pressure test

Find the water replenishment valve of the wall-hung boiler, rotate counterclockwise, you will hear the sound of water flow, then the cold water enters the wall-hung boiler, and will start to flow along the heating pipeline, at this time, pay attention to whether there is water leakage in the radiator and pipe (such as the radiator pressure test can be skipped), and then open the exhaust valve of the radiator in order from near to far from the wall-hung boiler, and discharge the air in all the radiators until there is water flowing out of the heating exhaust valve, and close it.

At this time, the pressure gauge pointer of the wall-hung boiler will gradually increase, and when the pointer of the general gas wall-hung boiler points to the left and right, close the water replenishment valve of the wall-hung boiler, and the water pressure is stable at this time, and the pointer remains still. At this point, the heating water injection is complete. Here I will say that if the flow time is too long and the pressure is too large, you can reduce the pressure by putting a little water in the radiator in the bathroom, and the water pressure of the wall-hung boiler will automatically relieve the pressure when the water pressure exceeds 3.

3. The mode setting of the wall-hung boiler

Turn on the power supply of the gas wall-hung boiler, and press the switch on the wall-hung heating stove (some machines will automatically turn on when they are turned on).

Dual-purpose wall-hung boilers generally have winter mode and summer mode, the difference between the two modes is that the heating function of the summer mode does not work, and can only use domestic hot water. Some models are also set with radiator mode, floor heating mode and other scenarios, which can be switched as needed.

4. Set the water temperature of the wall-hung boiler

After setting the mode of the wall-hung boiler, let's set the heating water temperature, as shown in the figure above, the two up and down buttons on the left side of this model are used to adjust the temperature of the heating hot water, and the two up and down buttons on the right side are used to set the water temperature of domestic water. If it is a floor heating water temperature is generally about 55 degrees, the temperature of the radiator is generally more than 60 degrees, and the temperature of bathing and bathing is generally about 41 degrees in winter.

After the heating water temperature is set, the wall-hung boiler automatically heats the circulating water in the heating pipe until it reaches a predetermined temperature. Just wait for the room to warm up.

As long as you use it, you will get exhaust gas, and you will always use a small fire to save money.

Most people have a misunderstanding when using a wall-hung boiler. I think it would be better to lower the water temperature to save gas. In other words, it is thought that the ratio of how much water temperature corresponds to indoor temperature can save gas. These are all misunderstood.

For the wall-hung boiler, the design of its own parts and control board is of great help to save gas.

For example, the step-by-step gas valve used in Vaillant wall-hung boilers can adjust 430 steps in 2 seconds to control the output of natural gas according to different heating volumes. This is unique to Vaillant. Most of the gas valves used in wall-hung boilers are proportional valves, and only regulate the gas supply through high, medium and low.

In terms of water temperature and gas saving, each furnace has its own maximum heat power and conversion rate. For example, with an 18kw wall-hung boiler, the heat conversion rate is 92%, and the furnace is the most efficient when you boil the hot water to 70 degrees. Natural gas is more fully combustion.

According to the landlord, your machine can sense the indoor temperature to control, so that the room temperature can be adjusted to 20 degrees. The water temperature is between 65 and 70 degrees. If you want to save a little more gas, you can set the time period to control the different temperatures required for different time periods.

Note: Often many users are afraid of burning gas, so they set the water temperature at 40-50 degrees, if they use radiators, it is difficult to bring up the indoor temperature. And wasted air, and did not enjoy the warmth.

Pay for one's whistle. The body temperature itself is around 37 degrees. Therefore, turning the water temperature up is necessary for the use of wall-hung boilers.

If you want to save gas, buy a thermostat and control the working state of the furnace according to your needs at different times.

The indoor temperature changes according to the temperature of your heating sheet, find the temperature that suits your family's habits, such as room temperature 17 degrees, and then you look at the instant water temperature of the wall-hung stove, so that you can jump to this temperature when everyone in your family is there.

If there are elderly people in the family, it is recommended to adjust the temperature, burn it 24 hours a day, and the water temperature of the wall-hung boiler will automatically turn off when it burns near the temperature you set, and it will start burning again when the temperature goes down, so you don't have to worry about gas consumption.

If the family goes to work during the day, it is recommended to install a time control switch when you go home at night, if the wall-hung boiler comes with it, it is better, and the time is set 1 hour earlier than the time when the family goes home, and the indoor temperature will rise, and it will be warm when you return home.

If you want to heat up, you have to look at the temperature you want, and then compare the time-based combustion and all-weather combustion, and find one that suits you.

How did I first arrive, I hope to help you. In addition, this knowledge installer should tell you during the commissioning process, and it is recommended that you think about it more.

Solar term method:

The wall-hung boiler itself is the key to saving gas, and a gas-saving wall-hung boiler can save you a lot of follow-up costs. First of all, the national energy efficiency label is a must. Original imports are more exhaust gases, because the mixing ratio of gas is different in each region, and the economic conditions of residents are also different.

Turn off or lower the radiator valve in an uninhabited room: If the housing area is large, the room is large, and the population is relatively small, then the radiator valve in the room that is not occupied or used frequently can be completely closed or reduced, which is equivalent to reducing the heating area.

1. Adjust the valve according to the dosage.

If the area of the home is relatively large, but the number of people living is relatively small, then it is possible to directly adjust the valve to a little smaller, and no one lives in it can be directly turned off, so that the heating area becomes smaller, the amount of gas consumed is reduced, and the temperature increase in a small area is also very helpful, and the heating effect will be more ideal.

2. Reduce the number of starts.

The gas consumption of this heating stove is very large when it is started, so try to reduce the number of shutdowns and starts, if there is no one at home for a few days, it is best not to turn it off, but to adjust the valve to the lowest temperature of the operating state, so that the gas consumption will be smaller than the start, and the room will not be cold.

3. Clean up the scale regularly.

Many people find that when the wall-hung gas boiler is just used, the consumption is relatively small, and the heating effect is particularly obvious, but after a long time, they find that the same consumption effect is greatly unsatisfactory, which is caused by scale.

In view of this situation, it is necessary to ask professional staff to clean the work, especially the scale in the buried pipe and radiator should be cleaned and cleaned, which can improve the heating effect and prolong the use time of the system.

1. Temperature setting, the temperature of the wall-hung boiler can be set in daily needs, generally speaking, the higher the temperature set, the higher the energy consumption.

2. Close it reasonably, because after the wall-hung boiler is closed, it needs to consume more energy to reach the required temperature.

How to use a wall-hung boiler to save gas? Teach you 4 tricks to save a lot of gas bills in a year.

It is recommended to add ARCA's thermostat to save 20% of gas, and the protective agent will save about 15% of gas.

You can save 15-20% with ARCA thermostats, and 10-15% with TOWER heating protectors.

Large-scale installation of floor heating is more energy-saving than radiators, if you have to save gas, that is, the condensing furnace is more energy-saving than the conventional furnace 12 or 30%, the service life will be longer, the condensing furnace will generally be equipped with a condensation package, magnetic decontamination device, gas filter and protective agent, there is a waste heat **, this should be the most effective way to save gas.