How to fill the horns of ceramic black bull?

For the reasons why the newly laid tiles have broken corners or broken edges, we believe that there are the following reasons:

1. In the process of transportation and handling, the tile accidentally causes the corner to break. This situation is often encountered, the tiles are relatively hard, although there is a good packaging, but in the process of transportation and handling, it is inevitable that there will be bumps and bumps, then for this situation, the general plastering master in the paving, you can find and deal with it in time:

Treatment: If the number of broken corners and edges is not large, the plastering master should select the bricks that break the corners and edges, and pave them on the edges and corners. If you open the package and find a large number of broken corners and edges, you should notify the owner in time and let the owner contact the merchant to replace the bricks.

Under normal circumstances, the master is not able to pave the bricks with broken corners and edges, and if the master still paves the bricks with such broken corners and edges, then this responsibility must be borne by the master of construction.

2. In the process of paving the tile, it is inevitable that when it is paved to the corners and corners, it is necessary to cut small pieces to pave, and some masters accidentally cut the bricks when they break the corners or collapse.

If there is a small burr on the cutting edge, it is normal, and the master can use an angle grinder or sandpaper to polish it, but if there is a large broken corner or chipping edge, then it cannot be paved. At this time, if the bricks with broken corners and edges are paved, it is the responsibility of the construction master.

3. After the tile is paved, the brick surface is not protected, and other construction processes later, such as: woodwork, ceiling, installation of toilet faucets, etc., break the corner of the tile and collapse the edge.

The responsibility for this situation lies with the other construction personnel. In order to avoid this situation as much as possible, it is recommended that after the tiles are paved, they should be protected with a professional tile protection film.

4. Paving the tiles, causing the tiles to break the corners or collapse when filling the caulking or cleaning.

After our tiles are paved, we will generally carry out caulking, when cleaning up after filling the joints, many people are accustomed to using a shovel to shovel the surface stains of bricks, and when cleaning, they often use a shovel to shovel, if they are not careful, it is easy to cause the brick edge to collapse. The responsibility for this situation lies with the caulking contractor.

5. The reason for the tile itself, resulting in broken corners or collapsed edges.

It should be emphasized that this situation is very rare, even if the quality of the tile is very poor, generally speaking, it will cause the brick glaze crack or direct fracture, generally will not cause broken corners or edges. If it is the quality of the tile itself, the responsibility is of course borne by the merchant (manufacturer), however, this situation is indeed very rare!

What should I do if the corners are broken?

1. After the tile is paved, it is found that there are broken corners and edges, in addition to pursuing responsibility, of course, it is necessary to remedy it. This is the case with wall tiles, if it is not very serious, it can be simply remedied with a tile patch (tile filler). (To buy the repair agent, you can search for a treasure to see).

2. In this case, in some places that do not move often, you can repair it with a patch, and for places that are often walked, the potter recommends that you change the bricks, because after the repair plaster cloth is up, it will fall off if you walk on it more.

How to make up the payment of ceramic black bull? This has to have a certain foundation to make up for it, Di knows how to do it, and the master of the production process can make up for it, which is not easy.

If you need to make up the payment, it is a very complex process that needs to be completed by professional technicians.