How to clean the vacuum cleaner? How to clean the vacuum cleaner

We all know that cleaning requires tools, so having an appliance at your disposal will make us do more with less. So at this point, the finger butler vacuum cleaner is ready to play.

Then the finger butler is a cordless vacuum cleaner, the integrated design can be used at any time, without frequent replacement of suction heads and finding sockets, every corner of the home can be clean.

Just like the sofa or other places, there are often mites infested, using the anti-virus function of the finger butler, and the mites strangled in one minute, so after we suck the sheets, we are no longer afraid of secondary pollution, so that the baby at home can sleep at ease and reduce allergies.

This cordless vacuum cleaner lasts for 40 minutes, can clean a house of about 160 square meters, and we can usually use it for a long time when we pick it up, and we don't have to worry about the battery life of the cordless vacuum cleaner is not long-lasting, and sweeping the floor will pull your enthusiasm.

It is our responsibility to make your home environment safer and healthier.

How to clean the vacuum cleaner:

One: the cleanliness of the appearance.

In fact, it is relatively easy to clean the appearance, generally only need to wipe it with a soft cloth dipped in soapy water, but it must not be cleaned with organic solvents, so as not to crack, fade or paint off the appearance of the plastic, of course, it can not be cleaned with hard objects such as steel wool balls, so as not to cause damage to the body.

Two: filter cleaning.

1: For the filter with filter paper as the filter medium, you can use a soft brush to brush off the dust on the filter paper, and you should be careful and cautious when brushing the dust, and the filter paper should not be damaged;

2: For the filter with flannel cloth as the filter medium, it should be cleaned with cold water and then dried, and it must not be washed with hot water, nor should it be dried, otherwise the fine pores will be blocked and the suction power during vacuuming will be affected.

Three: odor removal.

When using a vacuum cleaner, the most annoying thing is the hot, baked stench coming out of the exhaust port. Before using the vacuum cleaner, you can use cotton dipped in lemon juice and put it in the dirt bin of the vacuum cleaner, so that when you use this "filled" vacuum cleaner to vacuum, not only will there be no odor in the room, but also a faint fragrance of lemon.

Four: clean the dust bag.

Dust and debris are poured out of the dust bag, washed with detergent, then washed with clean water and dried. If you put it inside the vacuum cleaner without drying it, the dust bag will be dirty when the vacuum cleaner vacuums again.

In addition to brushing the part of the vacuum cleaner attached to the ground, you can also use a toothpick or bamboo skewer to remove the entangled garbage, and the silk threads and hairs are so strong that they can only be removed by hand.

1. The cleaning of the appearance is the easiest, just wipe the surface of the vacuum cleaner with a damp cloth, if there is dirt, wipe it vigorously with a damp cloth dipped in soapy water, but it should be noted that do not use organic solvents to clean the stubborn dirt, so as not to crack the vacuum cleaner and lose the paint, and do not wipe it with a steel wool ball, because it is easy to destroy the appearance.

2. The cleaning of the dust bag is more troublesome, because the dust bag is full of dust, the dust should be poured out first, then soaked in soapy water, and finally cleaned by hand. If the dust bag is disposable, it can be replaced directly. However, it should be noted that every time the dust bag is cleaned or replaced, it is necessary to check whether the dust bag is damaged, so as to avoid dust chips directly entering the motor through the dust bag during use, resulting in the motor being stuck.

3. The cleaning of the filter is also more troublesome, because the filter has paper as the medium, and there is also a soft cloth as the medium, if it is the former, clean it with a soft brush, pay attention to carefully sweep the dust away, do not use excessive force, resulting in the crack of the filter paper, if the latter, dry it after washing it with cold water, pay attention not to dry, otherwise it will block the pores of the soft cloth and affect the suction power.

Note. In fact, it is relatively easy to clean the outside of the vacuum cleaner, you only need to use a towel dipped in a little soapy water or detergent, and then gently wipe it, but you must not use organic solvents to clean it to prevent cracking, fading or paint peeling of the plastic on the surface, and of course, you can't wipe it with hard objects such as steel wool balls, so as not to cause damage to the surface of the machine.

1. Cleaning of the shell: The cleaning of the shell is the easiest, generally only need to dip the soft cloth in soapy water type Tongshi, and then wipe it. Remember not to clean with organic solvents and gasoline to avoid cracking, fading or paint loss of the outer shell plastic, and of course, not to wipe with hard objects such as steel wool balls to prevent scratches.

2. Cleaning of the filter: first take off the filter screen and rinse and pat it with tap water. Then dry or air dry the strainer, preferably not baking, as the high temperature will cause the strainer to deform. It is also not possible to wash in a washing machine or dry with a hair dryer.

3. Cleaning of the dust bag: first pour out the dust and debris of the dust bag, wash it with detergent, and then wash it with water and dry it. If you use it before it is dry, the dust bag will become dirty when you use it again.

4. Inspection: After each cleaning, check whether the dust bag is damaged or not, and repair or replace it in time if it is damaged, so as to prevent dust and stolen goods from directly entering the inside of the motor limb, resulting in damage to the motor insulation and burning the motor.

1. Cleanliness of appearance. When washing the appearance, just gently wipe it with soapy water. Do not use organic solvents to clean to avoid cracking, fading, paint peeling and other cleaning of the plastic. In addition, you can't use a steel wool brush, so as not to cause damage to the machine, so that the gain outweighs the loss.

2. Clean the filter. When cleaning, it is necessary to see what the media hand of the filter is, if it is filter paper, just use a brush to gently remove the dust. If it is a flannel, it should be rinsed with cold water and then dried, and should not be soaked or dried in hot water, so as not to cause the fine pores to be blocked, affect the suction power of the vacuum cleaner, and shorten the service life of the vacuum cleaner.

3. Odor removal. After being used for a long time, the vacuum cleaner will inevitably emit a variety of odors, which not only affect the living environment, but also affect the mood of the owner, so it should be removed in time. When removing odors, you can dip lemon juice in the dust bag of the vacuum cleaner, so that when vacuuming, the space will emit a faint lemon fragrance.

When a large amount of garbage has been sucked in the transparent dust chamber or the suction power is weakened due to the blockage of the filter device, clean the vacuum cleaner.

1).Press the front cover button and gently remove the front cover from the vacuum cleaner in front of you.

2).Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can.

3).If you have inhaled fine powders, remove the dust bag holder from the dust filter bag and gently scrub the filter bag in clean water.

4).Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust chamber, and then install the front cover on the body and buckle it firmly.

Note: The dust bag should be installed in place.

a).Clean the air inlet filter: Open the front cover, take out the air inlet filter, wash it with water and dry it, and then install it.

1).Rinse the strainer with tap water and pat it first.

2).Dry or air dry the strainer, taking care not to bake it, so as not to deform the strainer due to high temperature.

When we do maintenance for household vacuum cleaners, a very important step is the cleaning of the filter, but many friends are afraid that they don't know how to operate and are afraid of damage, so they have not dared to operate it. So how to clean the vacuum cleaner filter, and how long can it be washed?

The filter of the household vacuum cleaner is dirty or not depends on the frequency of your cleaning, if it needs to be cleaned to a large extent after a big cleaning, if it is only occasionally picked up and used every time, it can be disassembled to see, and it can be cleaned if it feels a little dirty.

We make sure that the household vacuum cleaner is in a state of power off, open the dust bin, gently unscrew the filter, you can use running water to clean, difficult to clean stains can be cleaned with a neutral detergent, wait until it is completely dry before installing it back.

When cleaning, do not wipe with sharp objects such as steel wool balls, and do not use rubbing. It is best to air dry the filter screen of the vacuum cleaner, and do not blow or dry.

How to clean the vacuum cleaner filter, have you all learned? To maintain a good suction power of a vacuum cleaner, it is essential to clean the filter.

How to use:

1. Before use, check whether the parts are in good condition, and repair and check the air leakage in time if the parts are damaged.

If there is any leakage, check whether the dust in the dust bag has been emptied clean.

2. Before use, the larger stolen goods and pieces of paper in the cleaning place should be removed to avoid being sucked into the pipe and blocked during work.

Stuffed into the air outlet or dust duct, so that the vacuum cleaner does not work properly.

3. Generally, dry vacuum cleaners are not allowed to suck damp soil or sewage to avoid damage.

4. The motor bearing of the vacuum cleaner should be lubricated regularly.

5. If the carbon brush of the vacuum cleaner motor is worn out after long-term use, the carbon brush should be replaced with a new one.

6. When not in use, the vacuum cleaner should be stored in a dry and ventilated place.

Cleaning cycle: 1 time every 3 days.

Precautions. 1. Clean up the debris in the barrel and the vacuuming accessories in time. Note: Do not operate with wet hands to avoid electric shock.

2. Check whether the power cord and plug are damaged, and wrap the power coil around the machine after use.

3. After the work is completed, check whether the air inlet is blocked or debris, otherwise it needs to be cleaned up.

4. The machine should be handled with care, and the machine should not be hit by external force.

5. When cleaning the machine, please wipe it with a damp cloth containing water or neutral detergent, and the main head is strictly forbidden to invade the water for cleaning, do not use gasoline, banana water, etc., otherwise it will cause the shell to crack.

6. Do not keep the machine in a long-term continuous working state, and the continuous working time should be controlled within 2 hours, otherwise it will affect the life of the machine.

7. When the vacuum cleaner is used for a long time, the suction power will decrease due to the blockage of the filter mesh. To prevent the suction power from dropping, the filter and bag should be washed regularly with water.

8. If the host is hot, emitting a burnt smell, or has abnormal vibration and noise, it should be repaired in time and cannot be used reluctantly.

9. The hose should not be folded around frequently, and should not be overstretched and bent.

Hello! This cannot be washed. First, wrap yourself in a blanket that you don't use and ask if there is any remedy.

Secondly, use a hair dryer to dry, pay attention to the hair dryer should not be turned on for more than one minute at a time, don't burn the hair dryer for half an hour, let it stand for half an hour, operate it again, and then put it back on the blanket to absorb water and blow it again tomorrow morning, and then power on the test.

If you still have any doubts. You can ask me for more information.

OK! In the case of not being sure to dry it all! Just don't power him up yet! To prevent the circuit from burning out, you can take a picture of me when you deal with it tomorrow.

Flushed, it shouldn't be too serious.

Ask what to do if you don't have a blanket.

More absorbent.

Do you mean cleaning the filter inside the vacuum cleaner? In addition to the bucket and filter need to be cleaned, do not clean the water area, Jinba's filter has only one dust separation, if it is not very dirty, generally do not wash with water, if it is very dirty, wash it with water, take out the support frame in the dust compartment, soak the dust partition in clean water, put some laundry detergent appropriately, soak it for about 10 minutes or soak it with your hands, do not use a brush, and do not rinse with a high-pressure water gun, which will damage the filter fiber of the dust separation, and the dust separation will be easy to leak ash after damage. Then use clean water to clean the dirty water in the dust separator, and remember to dry the dust separator after washing before use. By the way, I recommend the next industrial and commercial vacuum cleaner "Kaidewei" is very good, produced in Shanghai.

Household vacuum cleaners have changed the way we clean and opened the door to a new world of cleaning, but after a long time, we still need to clean the vacuum cleaner, so how to clean the vacuum cleaner?

Before cleaning, we need to confirm that the household vacuum cleaner is turned off and powered off, find the correct location to store the dust bag, and replace or clean it; For the dust cup type, you need to pour out the garbage in the dust cup and then install it back.

The shell of the vacuum cleaner can be cleaned with a wet rag dipped in soapy water, and the shell can not be wiped with organic solvents, otherwise the shell will be broken and damaged, and do not rub it with sharp objects such as steel wool balls, and check whether there are gaps in the connection.

In normal use, pay attention to the control time, generally not more than an hour, the body is easy to be damaged by heating, the parts that can not touch the water should be cleaned with a small brush, and pay more attention to cleaning the dust cup or dust bag on weekdays to avoid the accumulation of dust inside, and the machine may be disassembled later.

The basic practice of how to clean the vacuum cleaner has told everyone to take good care of it and bring a better living environment to your family.