How to hook up with loach fishing, how to hook up knowledge with loach fishing

1. First of all, we must have a general understanding of mackerel.

predatory characteristics. It is a pelagic fish that likes to hunt live food and is sensitive to small moving objects around it. From insects that vibrate their wings when they fall to the surface of the water, to small fish and shrimp that swim close to the ground, once spotted, they are generally not easily let go.

I am even more interested in those small fish and insects that are sometimes up and down, fast and slow, and are particularly energetic.

2. The method of predation, sometimes it is to chase and kill, sometimes it is to intercept, sometimes without thinking, it is determined, sometimes it is necessary to follow and observe, and then start after figuring it out. But when attacking, they have a characteristic, that is, they shine on the lower teeth of the neck of living creatures, which is the same as that of tigers and leopards. Therefore, use a loach hook and act with a real loach or white striped fish.

Similarly, the selection of fishing positions should be consistent with the area and water layer where small fish and insects are active in the same season.

3. Fishing in the middle layer in spring and summer, fishing for the tail of the small bay or small bay mouth, fishing the bottom layer in autumn and winter, fishing the mouth of the mountain, fishing the slope, the fish that are jumping and preying on the surface of the water should be fished for the surface, and the big dark island has fish to catch most of the time. But don't be rigid, you should try fishing on the spot, which layer of biting hook to fish which layer, to find fish, and not to stick to one place.

Loach fishing can catch many kinds of fish, such as warped shells, red tails, mullets, silver carp, mandarin fish, and all predatory fish. Loach fishing can be done all year round, but the best season for loach fishing is three months a year, because these three months are the spawning season for redtail clusters. Only for these three months, the red-tailed group will form a flock, and after the eggs are laid, the red-tailed group will disperse.

This is related to the season, temperature, and water level, so it is more complicated to say.

The loach hook can be hung on the back, nose, tail, etc.

1. Back hanging method.

The hook method is a commonly used hook method for loach fishing, the specific operation is to pass the hook through the back of the loach and expose the hook tip and barbs, but the hook must not hurt the loach's spine, otherwise the loach will soon die and lose the effect of attracting fish.

2. Nasal hook method.

The nose hook method is a commonly used hook method for loach fishing, and the specific operation is to hook the hook from the position of the loach-type nostrils and expose the hook tip and barbs.

3. Tail hanging method.

The tail hanging method is a commonly used hook method for loach fishing, the specific operation is to pass the hook through the tail handle of the loach and expose the hook tip and barb, this hanging method is the simplest, but pay attention to the mouth when fishing, otherwise the loach is either bitten off half or unhooked.

How to use loaches to catch a cocked mouth.

First of all, choose a loach with a size of about 5 cm, if you choose a loach that is too large, you will not be able to swallow it. The mouth likes fresh food, you can tease it in a timely manner, pay attention to the distance of teasing should not be too large, and generally not more than 50 cm up and down. If the loach has not been swallowed completely, the rod will often be empty.

If you get a mouthful, try to pull it away from the fishing spot as soon as possible so as not to startle the other mouths.

Here's how to hang a hook for loaches:

When the lead head hook hangs the loach, it is best to use a small live loach 5-6mm long, and when you use it, you can also cut the head with a knife, the knife edge should be even, the hook enters the incision through the body cavity, and pierces it from the dorsal fin, so that the incision is close to the tin head, and then pulls out the line of the lower line hole, winds it into a slipknot, throws and pulls the fishing line, and the loach will be more and more tight.

Due to its heavy weight and fast sinking speed, the lead head hook is only suitable for fishing for deep-water bass, especially when the temperature is low, when the fish is at the bottom, the lead head hook is the most powerful, and it can be used all year round.

When the water temperature is high, the sea bass will also go to different water layers to hunt for prey, and the lead hook is used to throw the sea bass all year round, and the number of fish caught is also large.

The use of loach hooks, in the action should be similar to the real loach or white fish, the selection of fishing positions should be the same as the area and water layer of the small fish and insects in the same season, under normal circumstances, spring and summer fishing in the middle layer, fishing small bay tail or small bay mouth, autumn and winter fishing bottom, fishing mountain mouth, fishing hillside, is jumping on the surface of the fish to fish the surface, fishing according to the actual temperature to adjust the appropriate water layer.

The steps to hang a loach are as follows:

When you get to the fishing grounds, you can choose to go fishing on the shore of the shallows when the sun is good.

Choose a long rod of four or five meters, the fishing line generally uses the left and right through the line, if the individual fishing is relatively large, you can choose a larger line, the fishing hook is recommended to use the No. 9, according to the situation to add a lead rod, so that the line can be thrown farther.

3.The loach should not be too big, hook the dorsal fin of the loach with a hook, it is not only easy to hang but not easy to shake off, sprinkle some fish food near the fishing area, and keep the surrounding environment quiet.

The best way to hook loaches: back hanging method, nose hanging method, tail hanging method. Specific hook operation method:

The back hook method is to pass the hook through the back of the loach and expose the hook tip and barb, the nose hook method is to hook the hook from the position of the loach-type nostril and expose the hook tip and barb, and the tail hook method is to pass the hook through the tail handle of the loach silver dust and expose the hook tip and barb.

Loach fishing, there are three links, loaches to find a nest, loach cloth nest, scratch mouth.

There are many species of fish suitable for fishing, such as red tail, warped mouth, mandarin fish, black fish, silver carp, etc., as long as it is an pelagic predatory fish, it will have a strong desire to attack the loach that is scurrying around in the whole water layer.

Fishing loaches, must be fresh, sick is not very inappropriate, only active loaches, in order to be full of vitality, the whole water layer scurrying, and then attract predatory fish to attack, then what is to find a nest, cloth nest?

The method of hooking loaches is as follows:

1. Back hanging method: The back hanging method is a commonly used hook method for loaches, and the specific operation is to pass the hook through the back of the loach and expose the hook tip and barbs, but the hook must not hurt the loach's spine, otherwise the loach will soon die and lose the effect of attracting fish.

2. Nose hanging method: The nose hanging method is a commonly used hook method for loaches, and the specific operation is to hook the hook from the position of the loach-type nostrils and expose the hook tip and barbs.

3. Tail hanging method: the tail hanging method is a commonly used hook method for loaches, the specific operation is to pass the hook wax skin from the tail handle of the loach and expose the hook tip and barb, this hanging method is the simplest, but pay attention to the mouth when fishing, otherwise the loach is either bitten off half or unhooked.

The making of loach hooks.

1. Material: No. 7-12 Iseni hook or equivalent tin-free hook, tin.

2. Tools: a bamboo tube with a long diameter (with a bottom at one end), a medium-sized needle, a small-mouth metal container for tin melting, a pair of needle-nose pliers, a file, fire, water.

3. Make a casting mold: split the bamboo tube into two halves on the middle line, and use a red-hot needle to brand out two holes, one is a casting hook hole, on the seam of the bottom of the bamboo tube, the size of the diameter is the same as the hook handle, and the other is a thread hole (the upper and lower holes are really integrated), obliquely worn on both sides of the opening of the cylinder wall.

4. Casting: Place the needle in the wire hole, the tip of the needle is towards the bottom end, put the hook handle in the hook hole, close to the needle, the back of the hook is towards the wire hole, then close the mold, clamp it firmly with needle-nose pliers, and then adjust the hook tip to make it face the seam. After adjustment, the melted tin is injected into the mold, and at the moment when the tin solidifies, the needle is withdrawn, immersed in water and taken out, and then the mold is opened, the loach hook is taken out, and it is repaired with a file.

1. The hook is a sharp weapon for long-distance casting, which can catch fish species in the whole water layer, and can be roughly divided into two forms: falling hook and falling hook in terms of its type and use.

2. The most common hook fishing rig is to fall at the bottom, with three to five hooks in a string of hooks, connected between the main line and the lead sinker.

3. The target fish caught by the hook line group are extensive, such as common green, grass, carp, crucian carp, bream, catfish, yellow catfish, warped mouth, white stripe, etc.

4. Hook on the hook for fishing, the control of the water layer is the most important. When fishing for bottom fish such as catfish and catfish, the hook and bait should be as close to the bottom of the river as possible, and we can use different lengths of the line or the sinker to solve this problem.

5. After casting the rod and tightening the line, according to the angle between the line group and the bottom of the river, use different lengths of sub-lines, and the front is short and the back is long, which can effectively ensure that each hook is close to or lying flat on the bottom of the river, increasing the probability of catching bottom fish.

6. Adopt a mother-child pendant. The back fall can be used with a live pendant, and the weight should be lighter than the front fall, so as to ensure that the front fall is always in front when throwing, and the line group will not be entangled due to the double fall.

7. The function of the front drop is to fix the line group, and the back drop will press the connection between the hook and the main line to the bottom of the river, so that the whole hook is lying flat on the bottom of the water.

Hook hook hanging loach "two thirds" hanging method: long and long, hanging on the tail of the loach one-third. Straight wide, hanging a third of the way from the back.

Note: The hook must be hung through, generally with No. 9 or No. 11 Marusi.

You can check the number of ways to tie the loach, and if the hook is inserted from the mouth, it can be pierced from the front brain of the loach.

The loach hook can't let it die, and it can't let it swim, and it penetrates the hook from the back of its head and its central nervous system is damaged, and it can't move, haha.