How to deal with the insect control of wood in rural buildings

1.Paint treatment For some corners that have not been damaged, paint such as tung oil, shellac paint or varnish is used to brush the surface of the wooden cabinet, which can isolate the moth from the air and achieve the purpose of moth-proofing. It should be noted that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.

2.When the wooden cabinet is infested by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, and spray it 3 times 5 times in a row, after 8 hours, it can kill all the moths.

The production of insects needs to have a certain humidity and temperature, so if the wood board is insected, most of the reasons are caused by moisture, so the key to insect prevention is moisture. For wood boards, leveling and polishing only temporarily absorbs moisture, and when it encounters a suitable environment, it will release the moisture again. Paint painting and anti-corrosion and moisture-proof treatment can not only absorb excess water, but also act as a protective film to lock in moisture and prevent moisture return.

Therefore, the best thing to do is to give the board an extra layer of moisture-proof treatment, or paint an extra layer of moisture-proof paint.

An insoluble water-based preservative is used to press the wood into the wood fibers while pressurizing the wood in a closed vacuum tank. After pressure treatment, the wood is more stable, and the preservatives can effectively prevent the attack of mold, termites and insects on the wood.

1 Paint treatment For some corners that have not yet been damaged, use raw tung oil, shellac paint or varnish and other coatings to brush the surface of the wood, which can isolate the moth from the air and achieve the purpose of moth-proofing. Note that all should be applied evenly.

2 Pharmacy treatment When the wood is eaten by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wood, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths.

If you only see the fine powder falling out, it is most likely to be a mealty borer, if you hear the sound of biting the wood, sometimes you see coarse sawdust, knocking on the wood, there is a hollow sound, it may be termites or larvae of the longhorn beetle in it; If it is termites, things are more troublesome and should be dealt with by experts to avoid large losses; If it is a longhorn beetle, in general, the number of occurrences is not much, the sound it makes, it is easy to find out the channel of decay, drill with a drill, and sometimes use iron wire to hook out the larvae of the longhorn beetle, if you can't find the larvae, you can put crushed camphor, or camphor oil into the hole, and seal it with wax on the outside;

If it is a mealty borer, then in the part where the borer is found, drill some small holes with a small drill, inject camphor oil, seal the outside with plastic, and wait for the borer to die, and then paint to restore.

1) High temperature method: When dealing with the degreasing of building materials, residents generally use the steam high temperature degreasing method, which can not only degrease the building materials, but also effectively kill the adults and eggs of silverfish, which plays a role of killing two birds with one stone.

2) Chemical prevention method: for the joists used for laying the floor, before laying the floor, spray or paint with fenethrin emulsion, and stack the building materials used for furniture and wainscoting lining files in a unified and centralized manner, and spray them with special sanitary insecticides. Through the prevention of the above methods, the spread of silverfish can be basically controlled.

2) Fumigation method, soak the cotton in a special fumigation insecticide, use tweezers to put the cotton ball into the top of the silverfish damage hole, and then cover it with plastic film or household plastic wrap, and then seal it with tape around it, and use the fumigation, contact killing, and stomach toxicity of the insecticide to kill it. After fumigation, doors and windows must be opened in time for ventilation and ventilation.

1. Paint treatment. For some corners that have not yet been damaged, paint such as tung oil, shellac paint or varnish is used to brush the surface of the wooden cabinet, which can isolate the moth from the air and achieve the purpose of mothproofing. It should be noted that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.

2. Pharmaceutical treatment. When the wooden cabinet is infested by insects, dichlorvos and water can be used in a ratio of 1 5 to prepare the liquid, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths. After that, the wood is washed and dried with clean water.

3. Wipe with diesel. On a sunny day, place the wooden cabinet that has been eaten by insects in the morning sun, and paint all the wooden cabinets with a brush or cotton yarn dipped in diesel oil. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

Kiss! Hello, happy to answer your <>

How to prevent insects from solid wood|:Clause.

1. In order to prevent solid wood furniture from being eroded by moths, it can be smeared with concentrated salt water on the surface several times, which can have an anti-moth effect. :Clause.

2. Camphor oil mothproof: Camphor oil is dipped in cotton to make camphor cotton balls, which can be placed in pianos, wooden furniture, wardrobes, and cooking tables to drive cockroaches and insects. :Clause.

3. Pepper moth-proofing with an appropriate amount of sharp chili pepper or Sichuan pepper, mashed into the end, stuffed into the cavity, and flushed with boiling water, has the effect of killing insects, can prevent the spread of insects. :Clause.

Fourth, insecticidal water moth-prevention with fire water and a trace amount of insecticidal water mixed evenly, drip into the moth hole, can also kill moths, but this method is not suitable for baskets, cabinets and other food storage bamboo burners. Try to spray insect repellent water as much as possible after decoration or after decoration, and make sure that the pure wood furniture you buy has been treated with insect repellent treatment. :Clause.

Fifth, the new furniture varnish If there are conditions, after buying new furniture, it is best to paint the surface of the wood board without paint in the furniture, which can not only enhance the aesthetics, but also prevent insectsSolid wood generally refers to the material of furniture, which means that in addition to the hardware, the rest of the composition is all made of a natural wood with the same Xixu, and the internal structure is not spliced and glued. Only such furniture can be called solid wood furniture.

In terms of selling price, this kind of furniture is very expensive, several times or even ten times more expensive than ordinary furniture. Hope mine can help you <>

Do you have any other questions?

1. Keep your clothes clean.

Clothes need to be carefully washed before entering the cabinet, even chemical fibers and cotton fabrics that are not easy to grow insects should be cleaned before storage. If your clothes accidentally get on food scraps or leave food smells, you can easily get insects.

2. Dry clothes.

Clothes should be dried before they can be put in the closet, and the wardrobe should be kept ventilated and hygienic. You can vacuum your wardrobe to remove eggs and prevent insects from growing insects.

3. Clean clothes with the help of tools.

For some clothes that are not suitable for frequent washing, it is best to wait until the sun is shining and carefully brush them with a brush, especially the neckline and the seams of the clothes, and then put the clothes in the sun for more drying. This method is effective in removing eggs.

4. Spray drugs in time.

Spray with a sprayer to let the liquid infiltrate into the wooden cabinet, spray 3-5 times continuously, after 8 hours, it can kill all the moths, and then the wooden cabinet needs to be washed and dried with water. The medicine can also be replaced with diesel, use a brush or cotton cloth dipped in a small amount of diesel fuel to paint the wooden cabinet, dry for a few hours, dry and then apply, and so on until you see the insects disappear, and then use detergent to wash and dry the wooden cabinet.

5. Avoid placing furniture in damp, dark and insect-prone corners.

Generally, insect infestation occurs only when it is damp, and wood is relatively easy to absorb moisture, which will cause the growth of insect eggs, and frequent ventilation is crucial.

1. Paint treatment. For some corners that have not yet been infested by insects, paint the surface of the wood with raw tung oil, or varnish, etc., which can isolate the moth from the air and achieve the purpose of moth-proofing. It should be noted that when painting, the entire wood should be evenly painted.

2. Pharmaceutical treatment. It can be prepared with water in a ratio of 1 5 to make a liquid medicine, spray it fully with a sprayer, let the liquid infiltrate into the wood, spray it 3 times 5 times in a row, and after 8 hours, it can kill all the moths. After that, the wood is washed and dried with water.

3. Wipe with diesel. On sunny days, paint all the wood once with a brush or cotton yarn dipped in diesel. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash and dry with laundry detergent.

Generally, it is steamed with sulfur, painted and dried regularly.

1. The felled trees should be immediately peeled and piled up, and 1605 diesel emulsion or 1605 stock solution should be sprayed on the logs. The preparation method of 1605 emulsion is: kilograms of diesel oil, 50 grams of 1605 stock solution, 50 grams of solid glue, and 50 kilograms of water.

First, use hot water to melt the solid gel, add enough water, then add diesel, and then spray 3-4 times back and forth with a sprayer to fully emulsify the liquid, and then add 50 grams of 1605 emulsifiable concentrate, stir well. A hand-held ultra-low volume electric sprayer can be used to spray with 1605 stock solution, and it is advisable to evenly distribute the fog spots.

2. If conditions permit, the peeled willow wood should be immediately put into the canal water (or river water) to soak for 3-4 days, or for the pine plank, 4% borax solution should be added to soak for 12 hours, which can eliminate the source of insects. If the wood is built with the above methods, there will be no moths.

3. For the rafters and other wood that have been moth-eaten in the house, when the adult insects (beetles or bees) are just drawn up every year, they can be smeared with 1605 diesel emulsion or 1605, 50 times the liquid plus kilograms of salt, and these moths can be used for several consecutive years.

Fourth, when moths occur in the warehouse, aluminum phosphide fumigation can be used. That is, the aluminum phosphide tablets are placed on dry paper with a wet sand layer in advance enamel, and after the tablets are damp, a large amount of phosphine toxic gas will be volatilized to achieve the fumigation effect. The dosage is 50-100 grams per 10 cubic meters.

In order to evenly distribute the poisonous gas, multiple discharge points should be set up in the warehouse. Fumigation for half a month, then open the window, remove the medicinal gas, and bury the remaining residue deeply.

If it is placed in the room with camphor will do. If you have a large batch, spray the potion directly.

Direct antiseptic, not afraid of insect damage, and will not rot.

jj01 ah z1 oh haha oh oh me me 1 in the real oh 1 oh 1 uh confused.