Can you lay floor tiles when it s cold Can you lay tiles when it s cold?

I'm a resident of the north, and the house came down late. I want to finish the renovation of the house this winter, run the taste, and live again next year. Now the only thing I am worried about is that winter is coming, will the weather affect the floor tiles? Will it affect the quality?

Answer: I am engaged in interior design floor tiles can be paved in winter, but the construction requirements are also relatively high to the upstairs friends said well, cement mortar will freeze. Affects the quality of sand and ash.

As soon as the weather warms up, there will be a hollow drum. Therefore, you must find a better worker, the master is responsible for the construction site, because there are many workers in order to finish it quickly, and do not pay attention to the details will have a great impact on you, so the more responsible workers will be fine, and after your floor tiles are pasted, you call the workers or you yourself to knock on the bricks every time to see if there is a hollow drum phenomenon, and there is an exchange to ask him to replace it in time, and it will be OK

As long as the room temperature is normal, it can be paved, without affecting its quality, and it can be done at any time. If it is more than ten degrees below zero, it will have an impact, and the cement mortar will freeze. Affects the quality of sand and ash. As soon as the weather warms up, there will be a hollow drum.

Floor tiles can also be laid in cold weather, and there is generally no problem indoors, which will not affect the quality.

The general temperature of interior decoration construction should not be lower than 4 degrees, otherwise it will affect the bricklayer (which will cause the adhesion of cement mortar and brick), and there is no major problem for other types of work.

To say that there is basically no big impact!

It is best to avoid the rainy season, as there are certain hidden dangers in transportation and storage!

After the floor is laid, it is best to adapt to the heating for a period of time, at least the heating should not be too hot, which will also make the floor appear as a problem, such as thermal expansion and contraction, etc.!

In winter, the floor tiles should be soaked in water before treatment, and the water should reach a saturated state. Only in this way, when paving, it will not be firmly bonded with cement due to slurry, hollowing, falling off and other phenomena. In addition, whether it is a wall tile or a floor tile, it is necessary to move from the outdoor to the indoor transition 24 hours, when the temperature of the material rises and adapts to the indoor temperature, the joints should be hooked in time after the paving.

Next, I will introduce you to the details of laying floor tiles in winter and the details of laying floor tiles in winter.

1. First of all, it is certain that the floor tiles can be pasted in winter, but it should be noted that the floor tiles must be soaked for more than two hours before paving, and then wait for the tiles not to bubble.

2. Then, the temperature difference between indoor and outdoor is large in winter, so it is necessary to wait for the tiles to adapt to the temperature before they can be paved. Generally, when the indoor temperature is -7 or -8, it is not suitable for laying floor tiles. Because this temperature is easy to cause the cement slurry to be unevenly stirred, it has a great impact on the floor tiles.

3.We all know that cement mortar needs to be used when paving tiles, if the weather temperature is too low, it will lead to uneven mixing of mortar, and even freezing, which will affect the paving effect of tiles. Therefore, strictly speaking, when the room temperature is below 0 degrees, it is recommended that you do not pave tiles.

In winter, the temperature can be high and low, so you can choose sunny weather and apply tiles when the temperature is high.

4.After the tiles are moved from the outdoors to the indoors, they need to wait until 24 hours before they can be used, which is to allow the tiles to adapt to the temperature indoors.

Tiles can also be laid when it is cold. But be sure to put some antifreeze inside the cement.

Can you tile when it's cold? How to prevent the hollow drum from falling off by tiling the kitchen flue? Decoration is full of learning.

Before laying tiles in winter, it must be soaked in water to saturate the moisture of the tiles, so that when the tiles are not pasted firmly, they will not be glued because the tiles absorb the slurry, resulting in hollowing and falling off.

It should also be noted that the outdoor and indoor temperatures are not the same in winter, so both wall tiles and floor tiles should be moved from the outside into the indoor, and the temperature of the material can be paved only after the transition of 24 hours to adapt to the indoor temperature, so as to avoid hollowing and falling off, and the tile should be hooked in time after paving.

Construction should be stopped when the temperature is below 0 in winter. The laying temperature of floor tiles should preferably be higher than 10. In winter, if the temperature is too low, the solidification period of cement mortar is long, it is easy to cause tile hollowing and loosening, the general indoor temperature is lower than 5, it is not suitable to pave tiles, if there is heating in the room, it is not much impact on paving tiles.

Before laying, the floor tiles must be placed face down on the construction site for more than 24 hours so that the temperature of the floor tiles is the same as the room temperature. The room temperature should be kept as constant as possible during the laying process.

Second, winter paving precautions.

1. The construction temperature should not be too low.

The on-site temperature of interior decoration construction generally cannot be lower than 5 °, otherwise it will cause the adhesion of cement mortar and tile to be reduced, which will directly affect the effect of Jianhong after tile paving. If the temperature is too low, it is recommended not to construct a terrace or an unenclosed balcony.

2. Stir the mortar and avoid ice cubes.

The sand must be carefully sifted and not mixed with ice. When there is a difference in temperature, you can add some antifreeze appropriately, and when stirring the mortar, the temperature of the water should not exceed 80. (Note note:.)

The main ingredient of antifreeze is nitrite, which is harmful to the human body and can be poisoned if ingested in excess at one time. Therefore, try not to use antifreeze if you can, and do not use it if the temperature is above 0°. ）

3. Before paving, the socks are changed to soaked tiles.

Winter tiles should be soaked in water before paving, and the moisture must be saturated. Only in this way, the bonding will not be due to the tile absorbing cement mortar water, resulting in poor bonding with cement, and the phenomenon of hollowing and falling off.

4. Reasonable seams.

When paving tiles, you can not use no seam paving for the pursuit of beauty, and the tile paving is too tight and too dense, which is easy to leave hidden dangers in the future. Due to the great difference between the thermal expansion and contraction coefficient of the base layer, the adhesive layer and the tile itself, under the destruction of hot and cold tension in 1 2 years, over-dense paving is easy to cause problems such as tile bulging and fracture.

Moreover, the cost of re-laying will be 4 times more expensive than the first laying. Especially in the cold winter, it is necessary to consider how to reasonably leave the joints, so as not to bring all kinds of troubles as soon as summer arrives.

5. Ensure indoor temperature and humidity.

If the tiled working surface is frozen in winter, there will be hollowing, and the way to prevent it is to ensure a certain temperature and humidity in the room.

<> can be pasted. Due to the low temperature in winter, we must pay attention to leaving enough gaps and spacing between each floor tile when pasting floor tiles in winter, and each piece must not be pasted next to each other, otherwise due to the principle of thermal expansion and cold contraction, the floor tiles laid in winter will expand in hot days, and the floor will burst. The weather is dry in winter, before pasting the floor tiles, be sure to soak the floor tiles in the water to make the floor tiles wet, so that they can be better combined with the Ling cement mortar when pasting, and paste more firmly.