The balcony has internal insulation, and now I want to change the wall tiles, is it okay? What shoul

Tiles cannot be placed on the balcony until the insulation is removed. Because the brick wall needs to be plastered with cement on the wall, the weight of the cement is heavier, and the material of the insulation layer is lighter, which will cause the insulation layer to deform and even fall off seriously after a long time. Therefore, before laying wall tiles, be sure to remove the insulation layer.

For this type of product, procurement is also a critical step before construction. Be sure to see if the grade and color of the product are consistent with the sample. After confirmation, try to find the person in charge of construction to sign for receipt.

Of course, if there is an error, you should immediately find a tile seller, explain the situation with them and replace or return it.

When paving, the quality of the wall tiles used must be high, so as not to buy inferior products, because the wall tiles of poor quality will have great defects during construction, such as hollow drums, uneven splicing, etc. Therefore, we should be cautious when purchasing, and pay more attention to the flatness, verticality and finish of wall tiles. Insulation is a special kind of wall.

If the strength is not up to standard, the tiles will not be successfully pasted, let alone hung with other objects. If you have to do it, you can also remove all the insulation layer and increase the area of the balcony. Once the cement wall inside is exposed, you can directly apply tiles.

But in this way, the insulation performance of the balcony will become very poor, and the balcony door can be installed to isolate the temperature later. If you are going to lay tiles in the kitchen, bathroom and other areas, you should do a good job of waterproofing before laying. However, because the tile cannot absorb water after waterproofing, it is necessary to use tile glue to reinforce when laying tiles, so that the tiles are not easy to fall off.

Although the insulation layer looks flat and suitable for direct tiling, the insulation layer is mainly composed of four layers of asbestos net and foam, which cannot absorb the moisture of the cement. The tiles will fall off after a long time on them, but this will not happen when they are removed and pasted with tiles.

Before paving the tiles, be sure to treat the base layer of the wall to ensure that there will not be too much dust and impurities on it, so as not to affect the laying of tiles in the later stage. And the day before the wall tiles, you need to wet the wall with water and soak the tiles, so that when the tiles are pasted, the wall base will not absorb water and cause the tiles to fall. After the tile is laid, it is necessary to remove the stain on the surface of the tile immediately, otherwise it will be more difficult to clean after a long time.

And after waiting for 12 hours, you need to check if there is a hollowing phenomenon. If there is, it needs to be repaired in time to ensure that it will not be affected for later use.

Whether to remove the insulation of the balcony tiles, the personal point of view is to see the insulation situation. If it is an insulation particle, it can not be dismantled, but if it is a insulation board, it must be removed. When pasting tiles, pay attention to these problems:

The first is to keep the plastering layer of the wall moist. Second, according to the requirements of the tile, choose the matching tile adhesive or tile adhesive. The third is to carry out maintenance in a timely manner.

According to the above methods, the tiles posted can basically ensure that they will not fall off.

Of course, you can, pay attention to the load-bearing problem, pay attention to the choice of tiles, not just random tiles can be.

Of course; Before attaching wall tiles, it is necessary to check the insulation process inside the balcony, and if the insulation process is missing, it is necessary to make up for the wall tiles again.

If the exterior wall has insulation, the interior wall can no longer be done, and the balcony tiles do not need to shovel off the insulation layer, and the insulation treatment of the wall can not be removed at will, which will affect the insulation effect of the building room, and may damage the waterproofing of the exterior wall.

The insulation layer is divided into internal wall insulation and external wall insulation, if the house is internal wall insulation, the building area of the house will be reduced, that is, the room rate is low, the main role of the insulation layer is to play the role of house insulation, heat insulation.

1. Smear anti-cracking mortar on the extruded plastic board, and then paste it on the wall under the balcony window to use the extruded plastic board, mainly because it is insulated and strong, and does not settle in water.

2. There should be a certain gap between the extruded plastic boards, and then fill them with anti-cracking mortar.

3. Finally, seal the gypsum board or light brick, the insulation of the balcony is the best, and then paste the brick on the light brick.

Yes, if you don't do insulation, your house will be cold, and you won't have a single tile left on the balcony next year.

In your case, the interior wall does not need to be insulated, of course, doing a layer of internal insulation will increase the thermal insulation effect, but the internal insulation will reduce part of the indoor usable area.

Now that the exterior walls are insulated, the interior walls can be left unnecessary.

Indoor insulation materials are actually used for indoor walls, wall insulation boards, and now we have to use various materials on the decoration, but people do not understand much about thermal insulation materials, so I will introduce what kind of shovel workers and brigade tools for thermal insulation.

The blade insulation can be opened with a knife and then with a shovel. The surface cracking mortar and fiber web can be removed first, and then the anchor bolts can be removed from the heat protection plate and pulled straight down.

1. Collect excess insulation materials, release them appropriately and stably, the gradient is small, effectively reduce the amount of loss, the trend is room temperature, and the winter insulation can play a balancing role.

2. In the renovation of new buildings and the renovation of old buildings, the defects of congenital defects such as walls, condensation, mold, and peeling were overcome; At the same time, it is safe and reliable and the general combination of the substrate, arbitrary, and no cavity, which avoids the wind pressure rupture of negative pressure tearing.

How to tile the balcony wall with an insulation layerEffectively overcome problems such as ribs, outer corners of corners, peeling of tiles and peeling of tiles. The organic matter in the substance reacts with the free acid present at the bottom of the main wall to form a compound that penetrates into the microscopic space of the main wall and becomes a community, ensuring dry adhesion, improving wet grip and having very good adhesion.

Nowadays, most homes choose painting when decorating their walls because it is the easiest way to decorate their walls. Not only is it convenient to construct, but the interior space is more spacious and bright, but there is no change, everyone can hang **. Frames and other shapes, as well as spotlights as decoration, make the walls look more beautiful.

Sticking dismantling wallpaper is also a very common way to decorate your walls. Nowadays, the wallpapers on the market are plastic wallpapers, chemical fiber wallpapers, and wallpapers, and wallpaper is often called wallcovering, which does not belong to wallpaper. The patterns and colors of the wallpaper are very rich and easy to create, but it is necessary to pay attention to anti-mildew measures during construction.

You can get it for free

When decorating, the indoor balcony has an insulation layer, and I think it is not recommended that you put tiles. There must be a necessity for builders to do this when they are building.

First of all, we need to understandThe role of insulation, why should the builder put on the insulation. The insulation layer in the building is mainly for heat insulation and heat preservation. In some places, such as the winter in the north, the outside temperature is very low, in order to warm indoors, in order to keep the indoor insulation, the insulation layer is set up to prevent the indoor heat from dissipating, so as to achieve the effect of indoor insulation.

At the same time, when it is hot, it will also prevent the outside temperature from entering the room.

In order to maintain the comfort of the indoor temperature is the effect that it is recommended to retain the insulation, in disguiseWarm in winter and cool in summerTarget. In fact, many friends have not paid attention to such a problem, that is, after we remove the insulation board of the balcony, the balcony will feel very cold in winter, and it will be very hot in summer. Because its thermal insulation properties have been completely lost.

Because no matter what the way, tiling on the insulation layer will destroy the performance it brings, just for the beauty of the surface and lose the real functionality, it will not be worth the loss.

When decorating, whether to put wall tiles in the interior or not needs to be judged according to the actual situation of the individual. It's just that I personally think that in the absence of other special circumstances, there is no need to destroy the practicability of the insulation layer simply for the sake of aesthetics. A home is a place where we live for a long time, and our first thing is to feel comfortable and comfortable.

Finally, I hope everyone can have a satisfactory environment!

Indoor balconies generally have the function of leisure and entertainment, and some also have the function of heat preservation, which can make people feel more comfortable when the indoor balcony is for leisure and entertainment. But sometimes when decorating, some people will choose to tile the indoor balcony, if the operation is not done properly, it will affect the function of thermal insulation. It is better to apply tiles with a solid layer of insulation.

If you must paste tiles and do not consider the function of balcony insulation, then it is recommended to remove the insulation layer directly.

When decorating, the indoor balcony has an insulation layer that can be tiled, and there is no big impact.

It can be pasted, and the indoor balcony has an insulation layer when decorating, and tiles can be pasted.

It is possible to apply tiles, but it will lead to poor thermal insulation and poor firmness of direct pasting.

It should be possible to paste tiles on the insulation layer, but it will affect the overall effect of the decoration, so it is better not to stick it.

The balcony has insulation and tiles, but the decoration effect will not be very good.

Yes, you can stick it, you can tell the master, and he will help you get it right.

Of course, you can post whatever you want, but it's a bit expensive.

The balcony tiles do not need to remove the insulation layer, and the insulation treatment of the wall can not be removed at will, which will affect the thermal insulation effect of the building room, and may damage the waterproofing of the exterior wall.

The method that should be taken for construction is to add steel wire mesh to the insulation layer of the exterior wall, and then apply a layer of plastering mortar (special for insulation layer construction), and then wipe flexible mortar, and hit the wall with **nails (special for insulation layer construction). Then apply tiles.

First of all, the insulation layer is divided into, interior wall insulation and exterior wall insulation. If the house is insulated, the building area of the house will be reduced. That is, the EFF rate is low.

Developers now use less; Exterior wall insulation refers to the structural layer composed of insulation materials that plays a role in thermal insulation in the external thermal insulation system. The energy-saving standards promulgated by the state stipulate that newly planned buildings must be made mandatory to do external wall insulation from October 1, 2001.

The main function of the insulation layer is to play the role of house insulation and heat insulation.

Suggested Solution:

Add a layer of cement board to the insulation layer, and the fixing bolts of the cement board need to penetrate the insulation layer and fix it with the main wall, and then hang the barbed wire, use cement mortar plastering, leveling and brushing, and then carry out bricking.

The plastering layer of the insulation layer is relatively thin, and when the ceramic tile and the bonded cement mortar are bonded and fixed with the plastering layer, its force on the plastering layer will exceed the adhesion bearing strength of the plastering layer, resulting in the problem that the tile and the plastering layer fall off together.

Search around from the Internet, do not shovel the thermal insulation layer, do not make barbed wire to paste tiles, there will be hidden dangers, as for when it can fall, it all depends on luck. It should be more reasonable to shovel off the wall skin and hang barbed wire. Because my home is a large area of floor-to-ceiling windows, there is only one wall of floor tiles to be pasted with wall tiles, and then remove the door or something, in order not to leave hidden dangers, I decided not to stick wall tiles, and use waterproof paint brushes.

It has to be all removed, or after a long time, the bricks will fall off.

Usually the balcony insulation layer is of little significance, there is no impact on the eradication, the key is safety first, and the wall tiles are not good if they fall.

Yes, many people pay attention to this problem, and ask experts for advice!