How to make a simple paper kite, how to make a paper kite

How to make a paper kite.

This is the most comfortable time of the year, neither hot nor cold, and the best time to fly a kite on the open grass.

How to make a paper kite.

First of all, prepare the materials: a bamboo strip of 28 cm and 33 cm, cotton thread, paper, dyes, a knife, a paintbrush, and glue.

1. First of all, tie the two bamboo strips into a cross, the shorter ones are placed horizontally, the long ones are placed vertically, and the intersection points are at one-half of the horizontal bamboo strips and one-third of the vertical bamboo strips, and then the cotton thread is used to locate the intersection of the two bamboo strips to fix the cross bracket.

2. According to the size of the bamboo strip cross bracket, cut the paper into a kite masking paper of the appropriate size.

3. Then draw a beautiful pattern on the masking paper, and after the dye is dry, paste the masking paper on the cross bracket.

4. Cut some other pieces of paper into long strips, and then glue these long strips to the end of the kite as the long tail of the kite.

5. Finally, tie the line at the intersection of the cross bracket and the 1 3 places of the vertical bamboo strip, so that the paper kite is completed, and it is relatively simple to make.

If you want to test how the paper kite is made, you can try to test the flight, and if the test flight is not successful, you can adjust it until the test flight is successful.

1.Find two thin wooden sticks, one long and one short, 2The upper part of the middle of the long stick is tied to the center of the short stick to make a skeleton.

3.Paste it on the surface with paper, which can be spliced together to make a surface similar to a diamond.

4.You can cut paper into long strips to make a kite tail.

5.Find the center of gravity of the kite and tie the kite string, not necessarily where the sticks are attached. To put it simply, you can hold the long stick with one finger and keep it balanced, so you don't have to be particularly accurate.

1. First of all, you need to prepare the following materials: paper, brushes, thread, scissors, glue sticks.

2. Then draw the outline of the kite on paper.

3. Then use scissors to cut out the outline of the kite.

4. Next, use a glue stick to glue the cut contour.

5. Next, use a paintbrush to draw a pattern on the kite.

6. Next, tie the string to the kite.

7. Finally, the paper kite is made.

I used to do this a lot when I was a kid.

First, take a thin piece of paper and cut it into a square with scissors. You don't have to be too particular about the type of paper...Newspapers are OK, too. The size of the square paper you cut can be as you like.

Then, use the same paper to cut several small rectangles, which are used to make the tail.

After all the paper needs is cut, the next step is to make the branches of the kite, which I usually use to make of bamboo.

Use a knife to cut the bamboo into two thinner branches, too thick is not conducive to the flight of the kite, the thickness is on the left and right.

After repairing, a branch is pulled into a half-moon-shaped bow with a rope and tied to it. The length of the bow should be suitable for the length of the square's angular line, not too long, not too short.

Finally, the branches are taped into a bow and arrow-like shape and attached to the square, and then the rectangular paper is pasted into a tail and connected to themIt's a kite!

As for the rope, it should be short in front and long in the rear, which is in line with the principle of taking off in the wind.

That's how it works!

The practice of handmade paper kites, the kite produced by this is strong, and the method is super simple.

Use fine bamboo skewers: 2 long (40-50 cm, cross as a skeleton), 4 short (around the border, make a rectangle of more stable balance) firmly tied (with a thin wire, or with a strong glue to ensure strong adhesion), paste paper,

There are many foreign single-line drawings of China Extreme Kite Network.

Simple colored paper handmade, teach children to make their own cute little swallow kites, easy to learn, everyone can learn.

Method steps.

Start by preparing paper, brushes, thread, a pair of scissors, and glue sticks.

First, the paper is trimmed to trim the swallow's two wings, head and tail.

Glue the trimmed parts together, and then use a pen to draw the pattern of the swallow, the eyes, and then the wings and tail of the swallow.

Cut a square piece of paper and stick it to the back of the swallow to make it easier to fix the rope.

After that, the rope is tied to it, and such a beautiful kite is ready.

To make a kite, you must first have bamboo, then tear the bamboo strips, then tie the bamboo strips together, make an octagonal shape, make a cross in the middle, and then glue the paper, and it is done, but there must be a big tail in the back.

The paper kite is made as follows:

Materials to prepare: paper, brushes, thread, a pair of scissors, glue sticks.

Operation steps: 1. Trim the paper first, and trim out the two wings, head and tail of the swallow.

2. Glue the trimmed parts together, and then use a pen to draw the pattern of the swallow's dry Xunzi, draw the eyes, and then draw the swallow's wings and tail.

3. Cut a square piece of paper and stick it to the back of the swallow to facilitate the fixation of the rope.

4. After that, tie the rope to it, and such a beautiful kite is ready.

Chinese kites have a history of more than 2,000 years. From the traditional Chinese kite, you can see the shadow of auspicious meanings and auspicious patterns everywhere. In the long years, our ancestors not only created beautiful words and paintings that embody the wisdom of the Chinese nation, but also created many patterns that reflect people's yearning and pursuit of a better life and imply auspiciousness.

Through the image of the pattern, it gives people the meaning of festivity, auspiciousness, concealment and blessing.