How can the old stake of fragrant wood live? What is the rooting technique of the old pile of fragra

1. Freshly planted fragrant wood, put it in a well-ventilated position with astigmatism and bright light, and avoid strong light at noon in spring. Maintain until the fragrant wood begins to sprout, and then strengthen the light.

2. After the fragrant wood germinates, when the bud point grows to about 5 cm, it can be moved to a sunny position (or combined with the air temperature, the temperature should not be higher than 28 degrees Celsius). If the temperature is close to 28 degrees Celsius, it should be properly shaded at noon. Keep it well ventilated with fresh air flowing.

Hydration method: When planting fragrant wood, if there are a lot of fibrous roots, the root water should be watered immediately. If there are a few fibrous roots, the planting material should be slightly wet before planting, and watered thoroughly on the third day after planting.

The watering method of fragrant wood continues the method of "watering thoroughly if it is not dry". But it is necessary to use watering flexibly.

1. When the fragrant wood is still a long bud, the surface of the planting material should be watered immediately when it is dry, and the cortex and branches should be sprayed and moistened every day, and the pile body should be moisturized.

2. After the fragrant wood germinates, the watering is carried out when the planting material is about 3 cm dry. This allows the sprouts to grow and the roots to breathe better. It is still necessary to keep the spray wet on the branches and cortex every day to hydrate and increase the humidity of the environment.

The fragrant wood old pile can only survive by planting in the right season, and it is easier to take root before planting.

Answer hello, if you want to cultivate the rootless fragrant wood old pile rooting, you need to do the following: 1It is necessary to choose the appropriate rooting time, generally speaking, choose from November to March of the next year to cultivate the old stump of fragrant wood, the temperature is suitable during this time period, the old stake can adapt to the environment quickly, and the level of auxin in the plant is conducive to rooting.

2.It is necessary to choose suitable soil to make the old piles of fragrant wood without roots take root quickly, and generally choose from peat soil, pastoral soil, and vermiculite according to 3:1:

1 ratio of the soil to cultivate fragrant wood, this kind of soil has good drainage, loose and breathable, and also contains sufficient nutrients, which is very suitable for the rooting of fragrant wood. 3.Before planting the fragrant wood without roots, it is necessary to prune, gently scrape off the rotten part of the old pile with a knife to avoid harming the healthy tissues, and then remove the wilted and yellowed branches and leaves to reduce nutrient consumption.

Trimmed wounds are disinfected with potassium permanganate smearing. 4.To plant old piles of fragrant wood without roots, you need to spray 1g l of rooting powder solution on the part of the soil to promote its rapid rooting, and after planting it into the soil, pour 200ml of water to compact the soil.

Fragrant wood likes warmth, and after watering, you can use a film to cover the soil to keep warm and promote root growth.

The sharing of rootless "nodule bag" fragrant wood old pile planting and maintenance management skills is especially suitable for novices to learn.

The green buds and bud points of the fragrant wood can be sprayed with brassin.

Brasssin, also known as brassinolide, is a new type of plant endogenous hormone, which is recognized as a high-efficiency, broad-spectrum, non-toxic plant growth regulator, with strong penetration and fast absorption, and can significantly increase the growth of plant vegetative bodies and promote fertilization at very low concentrations. It can effectively increase the chlorophyll content, improve the efficiency of photosynthesis, promote root and seedling growth, and protect flowers and fruits; Improve the resistance of crops to cold, drought, salinity and alkali, and significantly reduce the occurrence of diseases; And it can significantly alleviate the occurrence of pesticide damage, make crops quickly resume growth, and can eliminate disease spots.

Brassinolide is a new type of green plant growth regulator, which is treated by soaking with suitable concentration of brassinolide and spraying on stems and leaves. It can promote the growth of vegetables, melons, fruits and other crops, improve quality, increase yield, bright color and thicker leaves. It can also make the leaf picking time of tea earlier, and can also make melons and fruits have higher sugar content, larger individuals, higher yields, and more resistant to storage.

In the pesticide market, plant growth regulators are mainly synthesized sodium dinitrate and brassin. In practical application, the naturally extracted brassins have the best quality and better comprehensive economic benefits, and can be welcomed and applied by farmers. Regardless of which type of plant hormone it belongs to, it is harmless to humans and animals, and the normal use dose is very effective.

Natural brassinin can be widely used in food crops such as rice, wheat, and potatoes, and can generally increase yield by about 10%; When applied to various cash crops such as trees, vegetables, strawberries, melons and fruits, cotton and linen, flowers, etc., the yield can generally be increased by 10 to 20%, and the high yield can reach 30%, and the quality can be significantly improved, the sugar and fruit weight can be increased, and the flowers are gorgeous. At the same time, it can also improve the drought resistance and cold resistance of crops, and alleviate the symptoms of crop pests and diseases, pesticide damage, fertilizer damage and frost damage.

It is recognized by the academic community as a class 6 plant hormone. It can be used for field crops, fruits, vegetables, flowers, etc. It has multiple functions such as strong rooting, promoting growth, raising seedlings, strengthening seedlings, protecting seedlings, turning yellow leaves into green leaves, promoting the expansion and early maturity of fruit fruits, reducing diseases and alleviating pesticide damage, coordinating nutritional balance, drought and cold resistance, and enhancing crop stress resistance.

The first aid effect on the dead seedlings, rotten roots, and cataplexy caused by heavy stubble, disease, pesticide damage, frost damage, etc., is obvious, and the application is obvious for 12 to 24 hours, bringing the dead back to life, and quickly recovering vitality. It is suitable for food crops, cash crops, vegetables and fruits, etc., to promote growth, make fruit bulking agent, and increase yield.

The ratio of brassinin to water should be judged according to the concentration of brassin. The concentration of brassin, every 5 to 8 milliliters needs to be mixed with 30 catties of water. The concentration of Yuntai, per 15 ml of brassin, is mixed with 30 catties of water.

Reasonable use can have a better effect. Brassin is a highly effective, non-toxic growth regulator that promotes better plant growth even at low concentrations.

Fragrant wood bonsai is relatively slow to survive, it begins to germinate in about a month, and it generally takes about a year to grow roots, and it also needs to be observed after growing roots, and it takes 2 or 3 years to determine survival.

The cultivation method of fragrant wood.

1. Soil: When cultivating fragrant wood, soil with good drainage capacity should be used, and the cleanliness of the soil should be ensured.

2. Moisture: It is necessary to replenish water in time during the maintenance process, under normal circumstances, each watering can be spaced at an interval of 5-7 times. Proper hydration is good for growth, but overwatering can cause root rot.

3. Fertilization: In the growth process of fragrant wood, there is no need for too much fertilizer, but it cannot be applied without fertilizer at one time. Bika water-soluble fertilizer should be used in small quantities, and the frequency should not be too frequent.

4. Pruning: Generally, when it grows to about 50-70cm, it should be pruned, that is, some dense and dry branches should be cut off.

The root system of the old pile of fragrant wood is perfect, and it can take root and survive one month after going down the pile. Choose loose soil, add some red soil, promote the survival rate of rooting, and then do a good job of sealing the branches, wrap the main stem with a moist cloth, and then wrap it with plastic wrap. Wait until the root system is well developed before pruning the shoots.

The growth rate of the fragrant wood is slow, and the roots of the small saplings are fragile. The old stump of fragrant wood that has grown for many years needs to be maintained for more than 1 month after transplanting to take root and survive. The root system of the old pile is well developed, the nutrients are sufficient, the germination ability is strong, and the growth rate of new branches and leaves after transplanting is fast, which effectively improves the survival rate.

For the rooting and survival of the stump of the fragrant wood, it is necessary to choose loose and breathable soil to provide a good growth environment for rooting and germination. You can add some laterite, the laterite is loose and clean, which reduces the breeding of bacteria, and the soil is breathable and fertile, which is conducive to promoting the survival rate of rooting piles in the lower hills.

When the fragrant wood is going down the pile, it is necessary to choose to transplant it immediately to reduce the loss of nutrients, and the wound area of the branch incision site is large, so it needs to be sealed. Wrap the trunk with a moistened cloth strip first, and then wrap it with plastic wrap to tissue moisture loss and accelerate the rooting of the downhill pile.

After the newly transplanted fragrant wood germinates and pulls branches, the new leaf buds carry out photosynthesis, and the development of the root system is gradually improved, and then the young shoots and buds are properly pruned to reduce nutrient consumption. Then transplant the downhill stump to a ventilated and warm place, and water it in time to ensure proper fertilization and maintenance in the sun.

Cut off the old and dead roots, and apply rooting powder. Preparation of soil: When blending soil, granular soil such as volcanic rock can be added to the substrate.

Planting in the soil: Make sure the root system is fully extended, then fill in the soil and compact.

1. Planting time

The fragrant wood old pile planting should choose the right time, generally planted in March every year, when the temperature is suitable, the plant is also in the growth stage, after planting can adapt to the new environment as soon as possible, resume growth, and improve the survival rate.

2. Treat the root system

There are two planting methods for fragrant wood old piles, namely planting with soil and bare root planting, among which the survival rate of planting with soil mass is higher, if you choose to plant with bare roots, you need to prune the root system, cut off the old roots, dead roots, and apply rooting powder to promote long roots.

3. Prepare soil

Qingxiang wood old pile likes loose, good drainage, breathable soil, can be added to the substrate such as volcanic rock, granular soil can be added to the substrate, improve drainage and air permeability, the pH value is best slightly acidic or neutral, is conducive to the later growth of plants.

4. Plant in the soil

If you choose the planting method with soil mass, put it directly into the soil, fill the soil and compact, and bare root planting, you need to ensure that the root system is fully extended, and then fill the soil compacted.

Old stakes of fragrant wood can be dug.

When digging for wild fragrant wood, you need to have your tools ready. The taproot is cut first in place and then the lateral root, otherwise the taproot will not be truncated, and the lateral root and fibrous root cause incompatible damage. When cutting, the cross-section should be small and smooth, and the soil should be kept on the root system after digging.

After excavating the wild fragrant wood, you can treat the root system, and prepare the flower pot when planting, because it likes to grow in a breathable environment, so the flower pot must be mainly breathable, and you can use a purple sand pot, tile pot or clay pot with good air permeability.

Precautions for planting fragrant wood.

Soil: The main requirements are drainage and air permeability, and the rest is fertility. There are no special requirements for the choice of specific soil, and some perlite or river sand can be added to it.

Watering: The growing period is in high demand, so it can be watered every three to five days, and it is best to water thoroughly. However, the plants are afraid of waterlogging and should not accumulate water.

Light: Plants prefer light and should not be in a dark environment for a long time. However, it should also not be exposed to the sun, otherwise the leaves will be damaged. Therefore, scattered light is the most suitable. Indoor and balcony well-lit places are OK.

After planting and raising the stump of fragrant wood, it can generally survive within 1 or 2 months, and before planting, the soil can be planted with loose, fertile, breathable and drainage soil with good performance. After transplanting, it is necessary to control the water, and after the root system of the plant adapts to the soil, the plant can be given sufficient light, water and fertilizer, and the plant should be sprayed with fungicide regularly.

Fragrant wood is a shrub or arbor plant of the genus Coptis chinensis in the sumac family, and the plant is also known as fine-leaved Kaimu and geranium. The appearance of the plant is beautiful, the posture is wanton, and the ornamental effect is strong. After digging the stump of the fragrant wood, the root system of the plant can be properly pruned, and the soil with good ventilation and drainage performance can be selected for planting and breeding, and it generally survives after 1 or 2 months.

In order to make the fragrant wood survive, it is necessary to strengthen the management after transplanting it. During the maintenance period, it is necessary to water appropriately to avoid excessive water, which can damage the root system of the plant and affect the growth of the plant. After transplanting, the root system of the plant has not yet adapted to the new soil, so the plant can be maintained in a cool and ventilated environment without giving the plant light and fertilizer.

After the fragrant wood is adapted to the new soil, it can be maintained normally according to the growth habit of the plant. The plant is a positive tree, likes light and temperature, and during the maintenance period, it can be placed in a well-lit location outdoors to stabilize the temperature at about 25 degrees. During the maintenance period, the plants need to be given enough light to facilitate their growth.

Fragrant wood is not resistant to waterlogging, and during the maintenance period, the plant needs to be watered appropriately to keep the soil moist. During the maintenance period, it is necessary to open the windows frequently for ventilation to maintain indoor air circulation. Plants are susceptible to pests and diseases, and the plants can be sprayed with fungicides regularly, generally between 20 and 30 days, the plants can be sprayed once to avoid the plants from being attacked by pests and diseases.