-
Dry fast? Wash it according to the following method and dry it, or dry it in the sun.
Generally, this is how to clean large bricks, first divide the teacher into three groups, brush the blocks, clean the blocks, dry the blocks, and then start working after being divided into three groups.
1. Put a small amount of neutral cleaning solution or mild laundry detergent in water first. Then soak for about 15 minutes.
2. Next, start to scrub with a soft-bristled shoe brush, and put the building blocks into a clean water basin for cleaning after brushing, generally cleaning 2-3 times.
3. After cleaning, wipe the water on the building blocks with an absorbent rag, wipe it clean and put it on the desk, and you can pack it for class the next day!
Precautions: 1. The water temperature is recommended to be about 30, and the building blocks will be deformed if the temperature is too high.
2. Use an absorbent cloth to dry, the dried building blocks can be dried quickly, generally more than an hour to dry, and can also reduce the water stains on the building blocks.
3. After cleaning and wiping, please choose the way of drying in the shade to avoid high temperature exposure to drying, otherwise the building blocks will be deformed and faded, and the white building blocks will turn yellow when exposed to the sun.
4. If you want to put dettol when washing the building blocks.
If the disinfectant disinfects the building blocks, the amount must be controlled, just put a little bit, and more will corrode the building blocks.
Small particle building block cleaning method:
1. You can put Lego bricks into a dense laundry bag, then put them in the washing machine, turn on the gentle mode or hand washing gear, and put in neutral cleaning liquid or mild laundry detergent.
-
Lego bricks are originally made of wood, and the surface is brushed with a layer of paint or other paint, so it stands to reason that the wood will not absorb water, and it is enough to wipe it with a normal cloth.
-
Quickly let him do the joyful Lego bricks. The best thing to do is to be in the sun, hopefully.
-
The easiest way to dry a Lego brick quickly is to put it in a plastic basket to ventilate it, or use a hair dryer to speed up the drying process.
-
You can use a hair dryer to dry it, which is the fastest method.
-
1. Direct water + toothbrush, warm water, shake it off after washing, and then dry it with a bath towel or shade.
2. The dust can be washed directly with a shower, and the dust must be brushed with a toothbrush, and a small amount of detergent is no problem. Liquor Zen.
3. Use a soft brush, gently sweep one by one, and the wheel letter can also be washed individually, and it is best not to wash the dust in batches (the time for a single part to enter the water is short).
Lego is broadly divided into two categories, one is the "regular" hundred series, and the other is the "technology" series. (LEGO products are updated faster than expected, and many classics will be extinct). >>>More
Apply a layer to the outer layer of the sides and let it dry. >>>More
Put it in the washing machine and spin it off, and then use a hair dryer to blow it, but it may not be completely dry, and the inside of the shoe is not easy to dry. It is best to leave it outside to dry quickly.
Follow the steps below.
1. Fold the square paper with two diagonal lines and two middle lines; 2Fold together into a double square. 3. Fold a closed edge to the middle line, and 4. After leaving a fold, open it to restore. >>>More
1.Dry your shoes quickly with a hair dryer.
You can quickly dry your shoes with a hair dryer, but you should also pay attention to the use of them: if they are good shoes, try not to blow them, they are easy to deform; If it is a white shoe, it can't be blown off, there will be yellow marks when it dries, and it can't be washed off next time. >>>More