How to set up the sky 4E water level automatic control alarm online?

Updated on technology 2024-07-18
24 answers
  1. Anonymous users2024-02-13

    The water level automatic control has been online, and the alarm general control has an alarm setting, and you can find the online setting in the setting to confirm a value.

  2. Anonymous users2024-02-12

    The automatic water level display controller uses a submersible pressure sensor. It has the advantages of high grid, easy installation, and luck. During installation, only the probe needs to be put into the bottom of the water to realize the full program actions such as automatic control of water level display and killing, automatic alarm, etc. All self.

  3. Anonymous users2024-02-11

    sql41 line water level automatic control alarm,As soon as you go online with this setting,You can be in its operation,If you don't know how to set it,You can directly it's their company's official website,Because they want a uh**that tutorial** with their customers to learn it。

  4. Anonymous users2024-02-10

    How to set up an automatic alarm like this line water level when it goes online? I'm always going to cure the friendship of society now. I think you can go to the settings and set it.

  5. Anonymous users2024-02-09

    Hello, open the settings, and then follow the instructions to go up. Or call the after-sales customer service, and they will deal with it as soon as possible.

  6. Anonymous users2024-02-08

    SQL-type who will automatically help you go up.,If it's limited to setting, especially who helps you tie the settings.。

  7. Anonymous users2024-02-07

    Don't just walk four nights, most involved in the automatic control of the structure and settings of the 113 sides, according to their home method? When is it required to connect?

  8. Anonymous users2024-02-06

    Who will eat the alarm online, how to set it up, you can go and clean it up directly.

  9. Anonymous users2024-02-05

    When the upper limit of the automatic alarm instrument is set for the refund control water level, we need to look at the upper limit parameters on the equipment.

    It is also necessary to look at the specific capacity of the device installer device.

  10. Anonymous users2024-02-04

    It's redundant, because when the water level reaches a certain level, it will automatically replenish the water What's the use of the alarm?

  11. Anonymous users2024-02-03

    In this case, you can make a relevant adjustment, because all aspects can be passed through the state of the manual.

  12. Anonymous users2024-02-02

    When the water level is lower than the lowest water level of the water tank, the device will sound an alarm.

    With the development of industrial technology, in order to realize the automation of the operation process, the requirements for the detection and control of temperature and pressure are getting higher and higher. High detection accuracy, multiple functions, stable and reliable work, simple circuit, and convenient operation have become the focus of the problem. In order to meet this demand, a temperature digital display controller with high detection accuracy, strong versatility, and can be used with temperature transmitters of various ranges should be conceived.

    First of all, let's take a look at the temperature digital display control instrument, the temperature digital display controller adopts a single chip technology, which automatically detects, calculates, displays and alarms the upper and lower limits of temperature. Its technical characteristics are: convenient to set parameters such as range, decimal point, upper and lower limit alarm and error correction; Achieve photoelectric isolation from the site to improve anti-interference; The digital-to-analog conversion uses VF conversion.

    Improved the accuracy of AD exchange; Serial is used for easy parameter setting and can be stored for a long time (when the power is off).

    The temperature digital display controller is mainly based on single-chip microcomputer, and the signal conversion circuit, keyboard input circuit and upper and lower limit alarm circuit of single-chip microcomputer form a complete intelligent temperature digital display control instrument system to complete the accurate detection and control of temperature. The working principle diagram of its digital display controller is as follows.

  13. Anonymous users2024-02-01

    The schematic diagram of the connection of the water level of the control tank of the digital display control instrument is as follows:

    The wiring diagram of the digital display control instrument is as follows:

  14. Anonymous users2024-01-31

    I suggest that you still use its brand of water heater, have heard of Baishunjia air energy water heater, use for 12 to 15 years without a problem, 24 hours to provide you with hot water, constant temperature water, only two or three kilowatt-hours a day, but also for air conditioning, I am Baishunjia air energy dealer, the user name is buckled.

  15. Anonymous users2024-01-30

    Each brand is different The basic thing is to press and hold the settings.

  16. Anonymous users2024-01-29

    Let's read the controller manual.

  17. Anonymous users2024-01-28

    What brand it is, than gorgeous, Xizi, to make it clear.

  18. Anonymous users2024-01-27

    There is no need to set it, and when the water level reaches 20, the water will start to flow.

  19. Anonymous users2024-01-26

    There is an automatic mode and a manual mode! Specifically, you also need to refer to the instruction manual of the supporting instrument, because the operation method of different instruments is also different!

  20. Anonymous users2024-01-25

    Solar Controller Button Function:

    Setting key: used to set the upper limit of the temperature of electric heating and the water level of adding water;

    Water level key: add water or stop adding water; The value used to set the upper limit of the water level after entering the setting; Set a timer to add water or cancel a scheduled water filling;

    Heating water temperature key: heat or stop heating; The value used to set the upper limit of temperature after entering the setting; Set or cancel timed heating;

    Pipeline insulation key: start and close pipeline insulation; or Pipe Loop Key: Starts and closes the Pipe Loop Key;

    Temperature control on/off key: Manually turn off or turn on the temperature control water supply function;

    Parameter setting: (factory value: upper limit of water level 100, upper limit of temperature 50).

    Set the upper limit of water level and upper temperature limit: press the setting key to enter the setting of these two parameters, at this time, the parameters of the upper limit of temperature and upper limit of water level are constantly flashing, use the water level key to modify the value of the upper limit of water level (factory 100, set range 50-100), use the heating water temperature key to modify the value of the upper limit of temperature (factory 50, set range 50-90), wait for 5 seconds to automatically save and exit.

    Set the timer to add water: press and hold the water level button for 3 seconds, after hearing the sound of "drop", the two-digit digits that display the temperature and the "time to add water" indicator start to flash at the same time, and press the water level button repeatedly to set the time to add water at a regular time. If you set it at 12 o'clock at noon, and the timing is at 8 o'clock in the morning every day, then set the number of hours 20 (range 00-23), wait for 5 seconds to automatically save and exit the "regular water" indicator light is always on, and the timed water addition function takes effect, and the timed water addition will be started at 8 o'clock in the morning every day.

    If you want to cancel the timed water refill: Press and hold the water level button for 3 seconds, and when you hear the "drip" sound, the "time to add water" indicator will turn off, and the timed water refill function will be canceled.

    Sensor sensitivity adjustment: If the water quality is too pure or the sensitivity of the sensor is reduced due to limescale after long-term use, and the highest water level cannot be detected, the sensitivity jumper switch of the sensor in the junction box can be jumped from low to high (the sensitivity of the sensor is set to the low position when leaving the factory).

  21. Anonymous users2024-01-24

    Different brands of solar water heater controller settings are different, but the operation method is similar, so at this time, you can find the manual**, the controller settings of most solar water heaters are in the manual**.

  22. Anonymous users2024-01-23

    Just set the water supply time and electric heating temperature.

  23. Anonymous users2024-01-22

    At present, the general manufacturer factory is set at 50mm, the main factor to consider is of course that you can't add water when refueling, and the owner of the refueling and water outlet car will definitely find trouble with the gas station. There are blind spots for measuring oil level and water level with liquid level meter, the blind area of water level is generally 20mm, less than 20 is not displayed or displayed as 0, if the water is high, then it should be noted, first of all, use the test ointment to measure whether there is water, and if there is no actual measurement, check the fault of the level meter itself.

  24. Anonymous users2024-01-21

    Take the timing of water supply and unloading as an example: 1 Press the "Set" button before and after setting 2 Pay attention to the display of Chinese characters Time, Temperature, and Water Level, all of which are adjusted by pressing the up and down buttons. 3 Under normal conditions, press and hold the up arrow key to toggle whether to set to constant water level (display"Constant water level" is when the water level is lower than the set water level, it will automatically turn on the water) 4 Constantly press the "set" button once to switch between "smart", "timing" and "temperature control" modes 5

    For details, please refer to the following website.

Related questions
7 answers2024-07-18

CPU what the hell.。。 Samsung's own? Visual inspection of slag.

5 answers2024-07-18

Hello: According to your description, please try it as follows: >>>More

5 answers2024-07-18

Personally, I think that 0578DB1 and 05785KC are better in the series, of course, there are good ones, but as a normal use, DB1 and 5KC can be, there is no need to pursue a good configuration, because after 1-2 years, such products will still be eliminated, so choosing a suitable one for yourself is the most important.

6 answers2024-07-18

The reason why many people think it is deceptive is because the premium has not been paid, or the policy is surrendered early, so you can only return the cash value, and you cannot return all the premiums you have paid. There is a fee for providing you with protection. The reason why you don't see the income until ten years later is that your dividend income is greater than the protection cost you spend after ten years, and generally speaking, the longer the time, the more dividend income.

14 answers2024-07-18

BYD E2 adopts the design language of Dragon Face, the hexagonal dot matrix grille and the narrow headlight cluster are integrated, plus the chrome trim strip is embellished, which greatly extends the width visually, and the entire front face is full of tension.