What is a Plugging Agent? How to use the plugging agent

When there is a leak in the house we live in, we have to repair the house. Otherwise, the leakage of the house will bring a lot of inconvenience and trouble to the homeowner himself. In our daily lives, although it is normal for the house to leak, many people also feel scrambled when this situation occurs in our house.

Plugging agent is a kind of coagulation hardening fast, high hour strength, with micro-expansion of hydraulic hard materials, this raw material is non-toxic and tasteless, after strict screening, excellent performance, easy to operate, can be used with water blending, can be used on the wet surface construction, can also be plugged with water, the effect is peculiar, this raw material can be widely used in housing, underground, underwater, quicksand tunnel and other projects of plugging, water stopping, emergency repair, perfusion and leakage engineering construction and leakage maintenance and so on.

In the houses we live in, some of them are used for a long time, and some are because of the sloppiness of construction, and there are often some leaks. After the emergence of this phenomenon, it is the most annoying housing problem for homeowners. When carrying out waterproof leak repair construction, we need to use waterproof leak plugging.

How to use the plugging agent

1. First of all, chisel the leakage point or leakage seam into a vertical or flare mouth to clean up the debris.

2. Put the rapid plugging agent into the stirring pot, add a certain proportion of water, quickly mix it into a mud paste, and stir it with 40 degrees Celsius water when the temperature is lower than 5 degrees Celsius in winter.

3. Put the mixed plugging agent cement on your hand, and when you feel that the cement is slightly hot, quickly press down in the direction of the leakage, and you can let go of it for a certain time, and the water may be blocked within 10 minutes.

4. After blocking the water, use polymer waterproof mortar to wipe the surface, and the surface can be cured for three days.

5. For the seepage pit, you can directly put the dry powder of the rapid plugging agent into the pit, and then step on it with your foot, and then loosen your foot after hardening.

6. For serious water leakage cracks, first dig out the drainage hole at the serious water leakage to slow down the leakage in the rest of the place, and finally block the drainage hole, and then use polymer waterproof mortar to wipe the surface.

The above is the relevant introduction to the plugging agent and how to use it, do you help yourself after reading it? Chinese people have always paid attention to the construction of houses, and feel that only with a house can there be a home, so everyone is sloppy about the construction and maintenance of houses! After all, you want to have a warm and comfortable place to live when you get home, don't you?

Therefore, when there is a leak in the house, you can't be careless! Prepare a little plugging agent for your home!

Plugging agent is a kind of material in the waterproof plugging material, where there is a need for no leakage, leak plugging can be done with New Zealand water-based epoxy elastic grouting glue.

Basic Principles of Plugging Agents:

The basic principle of the plugging agent is to use the pressure difference between the inside and outside of the leakage or leakage part, in the leakage process, the glue particles move to the leakage void or gap and gradually accumulate and fill the plug, and the particles are bonded together by the adhesive, so as to achieve the purpose of stopping the leakage.

Plugging agents are suitable for plugging voids and cracks that are smaller than that.

Application range and use method of plugging agent:

Leak plugging agents are mainly used in water cooling systems and liquid leakage sites of internal combustion engines, as well as in hot water heating systems and other circulating water systems. Such as leakage or leakage in the water tank, warm air radiator, cylinder block, water pump and other parts of the cooling system. It is mainly suitable for small holes and cracks of 08mm.

How to use: add water to the normal position, so that the water temperature reaches the normal working temperature, after adding the anti-leakage agent, do not replace the cooling water within a week, the general leakage is effective within 3min, and the curing time is 36 48h.

The materials required for the use of plugging agent include plugging agent and stirring pot, which are divided into four steps, and the following is the detailed operation of using plugging agent:

Step 1: Clean up the water leak.

The leakage point or leakage seam is directly chiseled into a vertical or flare mouth to clean up the surrounding debris.

Step 2: Mix the plugging agent into a sludge paste.

Put the plugging agent into the stirring pot, add a certain proportion of water to mix, and quickly stir into a mud paste shape.

Step 3: Press down the plugging agent in the direction of the leakage.

Put the stirred plugging agent cement on your hand and press it down in the direction of the leakage for a certain period of time before letting go.

The first four steps: waterproof mortar plastering and maintenance.

After the water blockage is over, it is necessary to touch the polymer waterproof mortar with a wheel, and the surface is cured for three days.

1. Clean up the water leakage.

Directly chisel the leakage point or leakage crack into a vertical or flare mouth to clean up the surrounding debris.

2. Plugging agent is mixed into mud paste.

Put the plugging agent into the stirring pot, add a certain proportion of water to mix, and quickly stir into a paste shape. In winter, when the temperature is below 5 degrees Celsius, stir with 40 degrees Celsius water.

3. Press down the plugging agent in the direction of leakage.

Put the stirred plugging agent cement on your hand, press down in the direction of the leakage, and last for a certain time before you let go, and the water will be blocked within 10 minutes.

4. Wipe the surface with waterproof mortar for three days.

After the water blockage is over, it is necessary to wipe the surface with polymer waterproof mortar, and the surface is cured for three days. For seepage pits, you can directly put the dry powder of plugging agent into the pit, step on it with your feet, and then loosen your feet after it hardens.

There are many waterproofing materials on the market today, and leak plugging agents are one of them. So the question is, can the plugging agent be waterproof? For uninformed netizens, let's follow my footsteps to see if the plugging agent can be waterproof?

1. The plugging agent can be waterproof.

2. Plugging agent is a kind of hydraulic raw material with micro-expansion, which is not only non-toxic, tasteless and simple to operate, but also can be used only by mixing with water, and the effect is peculiar.

3. Of course, in addition to the construction on the wet surface, it is also widely used for plugging leaks in housing, underground and other projects.

The above is all the content of can the plugging agent be waterproof, I hope to help netizens.

What is the plugging material? Polymer plugging data in the use of more than 20 years, through repeated practice and application, it is a variety of chemical raw materials professional formula manufactured into A, B two liquids, with a specific pneumatic appliance written in the concrete structure cracks, according to the water flow ratio in a few seconds and water crystallization expansion, especially used in the industrial and mining enterprises circle tunnel, basement plugging, civil air defense, caverns, pools, ponds, tunnels, rock foundations, power plant cable trenches, valve shafts, shafts, chemical plant acid, pond and other leakage water flow plugging projects.

The polymer data used in the basement to plug the leakage has outstanding hydrophilic function, the slurry viscosity is low, the soaking function is deep, and it can enter the capillary slit of the concrete structure 107-108, and the water is the same before condensation, and the slurry is dispersed and combined after encountering water, and then gel and consolidate, and the grouting is carried out in the case of wetting or leakage, and it has strong adaptability to water quality, and can be gelatinized in water with a pH value of 3-13: the solid colloid is an elastomer, which can be expanded in case of water, and has the two-layer function of elastic water stop and water stop with water, which is suitable for water conservancy, electric power, Waterproof, anti-seepage and leakage plugging treatment of tunnels, culverts, subways, civil air defense, mines and other construction joints and deformation cracks.

The plugging material is used in any proportion of mixing ratios, which can produce different strengths, different penetration depths, different coagulation times and different expansion multiples. Long-term pants Xunzhou guarantees outstanding water blocking function, acid resistance, bacteria, is not affected by large climatic conditions, and has a certain strength, elasticity and pressure change. In the future, the deformation joint only needs to be deformed and cannot leak.

What is the plugging material? Waterproof plugging materials include grouting plugging materials and plastering plugging materials. Grouting plugging material is to prepare a certain material into a slurry, and use pressure equipment to pour it into the gap or hole to diffuse and gel to achieve the effect of anti-seepage plugging.

The plastering and plugging material is often mixed into the cement with a coagulant with water glass as the main material, so as to promote the rapid hardening of the cement, temporarily block the leakage water, and create conditions for the use of a waterproof layer on it.

The grouting and plugging materials on waterproof engineering are divided into two types: cement grouting materials and chemical grouting materials.

Cement pressure leakage filling material.

1) Definition: Cement pressure grouting leakage filling material is made of cement or water glass and cement as materials, and it is injected into the parts that need to be repaired and plugged by pressure feeding equipment when used.

2) Features: cement pressure grouting leakage filling method has good leakage filling effect, high bonding strength, reinforcing the structure, and simple operation, easy material preparation, low quality. (3) Scope of application:

Cement pressure grouting leakage repair material is suitable for repairing deep, large holes and cracks with greater crack width, construction joints, joint leakage, etc.