What kind of construction is wet working? What does the length of wet work time affect? What are the

As the name suggests, wet work is compared to dry work, such as stone, with cement mortar.

Pasting is wet work. With the continuous development of domestic coal mining face in the direction of rapid and efficient mechanized construction, the traditional dry spray shotcrete method can no longer meet the requirements of use. Although some coal mines have adopted wet spraying spraying, most of them use manpower to load materials and spray concrete by manpower.

Effective planning is necessary for the successful completion of each construction project, both in terms of design and completion of the entire construction project, taking into account the possible environmental impacts of the entire construction project, establishing the construction schedule, financial arrangements, building safety, transportation and use of building materials, engineering delays, and preparation of tender documents.

Wait a minute. <>

Masonry, cast-in-place concrete, etc. are called wet operations, which have an impact on the construction period.

In general building construction, the plastering of interior and exterior walls, floor and ground cushions, floor stone and floor tile paving, front stone and tile pasting are called wet operations. The wet operation time mainly affects the entry of subsequent paint painting, putty scraping, brushing, roofing, hardware installation and other construction.

Wet work is relative to the fine decoration in the later stage of the decoration stage, masonry, cast-in-place concrete should belong to structural construction, not to the usual wet operation.

The materials used in the project are aqueous mixtures, such as plastering, pouring, wet tiling, wet stone, etc. For example, for the operation of Lingyu involves blind stone, pasting with cement mortar is wet operation, and dry hanging is dry operation; For example, cleaning the floor, using a mop is a wet ruler to break the spine work, and using a broom or vacuum cleaner is dry work. Generally, the follow-up work of concrete moisture content is required to be controlled at 8% to 10%, for example, mortar is generally controlled at 10%, and wood is generally 8%.

Aqueous mixtures of materials used in construction work. Such as plastering, pouring, wet bricks, wet stones, etc.

As the name suggests, wet work is relative to dry work, such as stone, pasting with cement mortar is wet work, dry hanging is dry work, just like cleaning the floor, using a mop is wet work, and using a broom or vacuum cleaner is dry work.

Generally, the moisture content of concrete is generally controlled at 8 10%, and when it exceeds 10%, the follow-up work can be called wet operation; The moisture content of mortar is generally controlled at 10%, and the moisture content of wood is generally 12%, which is more than that.

There should be a problem upstairs, and the moisture content is too large, which is called not meeting the construction conditions.

Processes that require water operation are called wet work. For example, concrete pouring, bricklaying, plastering, etc.

The use of wet operation method is mainly to prevent () hazards for cracking.

a.Radiation. b.Creature.

c.Dust. The correct answer is like a big case scum: c

What to do after the home architect's assignment is to ask the architectural designer.