How to wrap a book jacket How to wrap a book jacket?

Choose the appropriate book cover paper according to the size of the book to be packed, you can go to the stationery store to buy a beautiful book paper with a printed pattern, and use the white paper to show you for the time being today, so that you can see it clearly.

First of all, put the book in the middle of the book cover, fold the paper over, and compare it to see the same width on both sides.

Put the book in the middle of the whole sheet, and use your fingers to outline the book (use your fingers to press out the marks), and press out the four lines of up, down, left, and right before and after.

Take out the book inside, and follow the outline just now to make the creases of the book cover paper clearer, so that the lines cross each other.

According to the thickness of the book and the size of the opening, cut the appropriate position, taking care not to exceed the horizontal crease, and then fold it upwards.

The operation is the same on both sides. Then take the book back and wrap it up according to the clear creases from before.

When wrapping the book, you can see if the maximum position of the book is suitable for the position you cut, and if it is not suitable, you can cut it a little more to adjust.

After wrapping it, carefully smooth it, and the whole of the book cover is complete.

But it seems that the edges of the book cover are a little warped, so let's make a little adjustment.

We glued the four corners of the book so that it would protect the corners of the book from curling.

But still don't feel protected enough? Read on.

So far, a complete book cover has been neatly wrapped, and the damaged and worn places have been protected with scotch tape.

Fold it with a larger piece of advertising paper and stick it with double-sided tape.

Here's how to wrap the book cover in the newspaper:

Prepare materials: newspapers, books.

1. First take a piece of newspaper, then fold it in half and spread it flat, and put the book in the middle.

2. Then, follow the traces of the newspaper fold line just now, and open the first page of the book.

3. Use scissors to slowly cut along the folded line of the newspaper (avoid cutting the book), and cut to the upper and lower sides of the book respectively. Then fold the newspaper on the left side over to wrap the front page of the book.

4. After wrapping, use the same method to wrap the last page of the book.

5. Finally, cut off the excess newspaper part, and the work of wrapping the book cover is completed.

1. First prepare tools, paper, books, scissors, etc.

2. Fold the paper in half, put the book in the middle of the paper, and the paper can cover the book.

3. Press and hold the paper and squeeze out the traces on the edge of the book.

4. Cut out trapezoids at both ends of the middle line. The height of the trapezoid is the crease that has just been pressed.

5. Open the paper and fold the trapezoidal shape you just cut out.

6. Put the book into the paper, wrap it according to the crease just now, and then glue it on.

7. The bookcase is wrapped well, and it is done.

Choose your favorite book cover. If the book is about 16k, you can cut the book cover from the middle with a knife (be careful not to scratch), and you can wrap two books; If the book is about 32k, you can cut the book cover from the middle and then cut it, and you can wrap a small book with a quarter sheet. Extrusion marks.

Place the book in the appropriate position on the book cover, centering it up and down, and on the right side, so that both sides of the book can be wrapped in paper. Then, press out the up, down, left, and right traces of the book on the book cover. <

1. Choose your favorite book cover. If the book is about 16k, you can cut the book cover from the middle with a knife (be careful not to scratch), and you can wrap two books; If the book is about 32k, you can cut the book cover from the middle and then cut it, and you can wrap a small book with a quarter sheet.

2. Extrusion traces. Place the book in the appropriate position on the book cover, centering it up and down, and on the right side, so that both sides of the book can be wrapped in paper. Then, press out the up, down, left, and right traces of the book on the book cover.

3. Cut the "trapezoid". Take the book away and cut a trapezoid shape on the upper and lower sides of the seam in the book. Be careful not to cut beyond the edge line of the book, but not in the middle of the seam. After cutting, fold the two trapezoids into it.

4. Wrap the book jacket tightly. Begin to wrap the school bag in. Place the book in the position of the corresponding trace, and then fold the corresponding part according to the trace, and wrap the cover of the book.

5. Folding. In order to make it difficult for the book cover to fall apart, fold the four corners of the book cover into it. The book jacket is complete.

6. Compaction. After wrapping the book cover, you can find a thick book such as a dictionary and press the book to make the book look neater. You can write the subject, name, etc. on the book cover.

If you want to protect it a little more, you can buy a transparent book cover at a stationery store and wrap it with another layer on the outside to increase the waterproof function.

The steps to wrap the book jacket are as follows:Materials: book cover, scissors, colored cardboard, glue.

1. Put the book in the middle of the book cover, fold the paper in half, and the width on both sides is the same.

2. Press out the outline of the book with your fingers, and press out the four lines of up, down, left and right before and after.

3. According to the crease, you need to use scissors to cut the upper and lower positions.

4. Arrange the book and cut it diagonally along the corner of the book.

5. Wrap the school according to the previous crease.

6. Apply glue on the back of the colored cardboard and stick it on the front of the book, and you can write the subjects on the cardboard to make it easy to distinguish.

There are many ways to wrap book covers, and the following describes a common method of wrapping book covers, and the steps are as follows:

Tools:Books, book covers, scissors.

Method Steps:

1. Find a piece of paper that is more than twice the size of the book and lay it flat. Place the book in the middle of the right side of the paper, fold the paper over the side of the book, and press the mark in the middle seam.

2. Take out the book, cut it obliquely with scissors according to the indentation on the old side of the book, cut it into a trapezoidal shape from the outside of the paper to the upper end of the middle seam of the book, and fold the trapezoid into the inside of the paper. Do the same at the lower end.

3. Align the middle seam of the book with the trapezoidal part of the folded inward and place it. Place the other side of the paper on the book, and press the marks on the top and side of the paper to create the hall. In the same way, turn the book and the paper over together and press the other side to make a mark.

Fourth, turn one side of the paper over and spread it flat, fold it according to the indentation just now, and fold it vigorously. The other side is no different.

5. Put the cover of the book into the book cover you just folded, and then fold the corner inward in the lower direction. Fold the other side in the same way. The book jacket is wrapped.

Generally, it is appropriate to leave three squares on the top, bottom, left and right sides of the book. Therefore, according to this principle, cut out the appropriate size of wrapping paper.

According to the principle of leaving three grids on the top and bottom, the four corners are folded inward, and the folded edge should be folded according to the edge of the sixth grid from the outside to the inside

Cut off the four corners according to the folding line, in order to facilitate the corresponding corners of the book, it is best to cut a little bit in the middle of the folded line to make a mark, so that it is convenient to find the corresponding position after tearing off the covering paper.

Corresponding to the position of the spine, cut two notches in the middle of the upper and lower positions of the wrapping paper, so that the upper and lower edges can perfectly bypass the upper and lower edges of the spine when pasting the upper and lower edges. The width of the notch is determined by the thickness of the book, and the thicker the book, the larger the notch. The depth of the notch should be slightly deeper than the three compartments.

Tear open the cover of the wrapping paper on the right to reveal the glued cover. Note that you only need to tear the position to the center of the folded corners a little bit, about half or more of the middle of the grid.

Align the right side of the back cover of the book with the center of the upper and lower folding corners of the right side of the book-wrapping paper, and the upper and lower edges respectively. After alignment, wipe the right side of the book up and down with your hand so that it is attached to the glue of the wrapping paper.

Turn the book over, gently tear the covering paper of the bread paper with the right hand, smooth the torn book paper up and down with the left hand, make it fit the back cover of the book, slowly tear and wipe to ensure that there are no bubbles, and stick it to the middle spine.

Turn the book over, paste the top and bottom of the back cover first, pay attention to be sure to fold the wrapping paper to align with the edge of the book before pasting, if it is not even, you can carefully tear it and re-paste it.

Stick the top and bottom sides and then the long side.

After the back cover is attached, carefully paste it over the spine and then paste the cover according to the steps above.

In this way, a book is perfectly pasted.

How to wrap the book cover is as follows:

Materials needed to wrap the book cover: book cover, paper, scissors.

Step 1: Spread out the book cover paper and place the book you want to pack at a point to the right of the book cover halfway down, depending on the thickness of the book.

Step 2: Fold the book cover paper in half, and the paper on the right is in the same position, then the position of the book is appropriate.

Step 3: Press hard along each side of the book.

Step 4: After pressing one side, turn it over to the other side and use the same technique to press out the edge.

Step 5: The edge of the book cover paper is presented with the edge of the book wrapped.

Step 6: The length and width of the outer distance between the book cover paper and the book should be 3 cm and 5 cm, too wide to waste paper, too narrow to operate and not very stable.

Step 8: Cut a diagonal line on the left side as well.

Step 9: Repeat steps 7 and 8 accordingly to cut out the diagonal line.

Step 10: Cut off the four corners.

Step 11: Put the book into the book cover paper and fold it inward along the horizontal lines of each side.

Step 12: The vertical line is also folded inward.

Step 13: The other side of the book is the same as on the back cover.

Step 14: In order to make it easy to identify, we can put a label on the bag and the book is done.

Isn't it too easy to wrap a book jacket like this? It's like wrapping a book!