-
The paper is folded into an accordion shape and tied in the middle with a rubber band to form two fan-shaped lines that spread out to the outside. Use scissors to cut out a small triangle at each end to create a petal-like look. Finally, stretch it out, tidy it up with your hands, and tie it with a ribbon to fix it, and it becomes a blooming flower!
Isn't it easy to operate? Another similar paper flower, large and small, colorful, spread out in the shape of a fan, hanging on the wall is also a very warm decoration.
-
First fold the paper, then cut the edges, and finally use a stapler to fix the gap between each "petal". The rose, which symbolizes beautiful love and is loved by everyone, can also be made of paper! First of all, draw the shape of a heart on the paper, use scissors to reduce it along the outline, as a rose petal for later use, remember to cut more in case you accidentally break it is not enough.
Isn't it realistic to make a rose branch with green tape? Then the rose petals are spliced together one by one, fixed with glue and tape, and it becomes a delicate and lovely rose.
-
First, we use a mold to cut out lace circles of different sizes, and then we stack them together in order from smallest to largest; Use a utility knife to drill a small hole in the middle of the stacked discs; Then use a pinhead to penetrate the hole; Finally, we fold each piece of paper by hand and bend it into the shape of a natural roll of petals, so that a small daisy is finished. Then we can make some leaves and branches to decorate, and I won't repeat the description here.
-
A piece of green leaves, a little bigger in the middle, about centimeters, a little smaller on both sides, about 4 centimeters, of course, if it's a bonsai set, I think the top green leaves should be folded a little smaller, you can design this yourself. I'm not a master at folding roses, and I'm not a master, but I just know how to simplify the method, and if I give me a little more time to fold it again, it should look better.
-
The paper of my lily bouquet is thickened, cut out of large sheets of white paper (of which five and six petals need to be cut out of pentagons and hexagons), the material contains 9 iron wires, 9 pieces of white paper, dark green thickened hand-kneaded paper 64 * 64 cm a piece, a piece of white glue, and a copy of double-sided tape. A knife is enough. The total height of the vase is 29 cm, the upper diameter is 10 cm wide, and the lower diameter is 10 cm wide.
The total height of the bouquet is 55 cm.
-
Many people say that it is too difficult to fold wine glass roses, in fact, it is not difficult to really fold wine glass roses, it is annoying, it took a few hours just to fold the line, in fact, there are methods and tools, Zilong I specially designed a set of particularly simple, very clear ideas, but also I pondered it myself.
-
This is rolled out of colored ribbons, and it is estimated that the ribbon itself is a complete one, and then folded with the simplest origami rose technique. It is recommended to buy a vase: total height 15 cm, upper diameter , lower diameter 7 cm.
Of course, you can also buy vases in the size you like.
-
If you are a novice, you have never had origami, I personally do not recommend you to learn this wine glass rose set, this wine glass rose contains full open, half-open, and flower bones, fully open and half-open calyx is the same, and the calyx design of flower bones is another one. The classic color of the wine glass rose is bright red, the choice of green leaves is also very important, to dark green, all the flowers and green leaves are kneaded by hand, the quality of the paper is also very high, the quality is slightly better, otherwise it will be broken when folded, and it will be in vain.
-
Prepare a piece of hand-kneaded paper with green leaves, the size of which is determined by the flowers. Fold in half along the diagonal line, find one of the sides, fold down, and fold the other end down, in the same way, the other side is the same operation, and then shape the opposite side, pinch it where there are sharp corners, make it smooth, natural, shape, and close the edge. Pinch the roots of the leaves for later assembly, and finally assemble the leaves onto the flower stalks.
-
Paper flowers can also be divided into crepe paper, kraft paper, ordinary origami, etc. Based on these, then find out exactly how to make crepe paper flowers, kraft paper flowers, and origami flowers. To be more precise, you can search for origami roses, how to do it?
Crepe paper lily tutorials, etc. In this way, you can find a tutorial on the flowers you want to fold step by step.
-
Handmade from cardboard
You can make a wide variety of crafts out of cardboard. The most common are: ground, air and space vehicles, various animals, houses, miniature furniture, chests, Christmas tree accessories, frames, coasters and bookmarks, games, puzzles, houses (windows, doors, roofs and other architectural elements can be added to the house.
Cardboard is a great material for crafts, so it's readily available and anyone who knows how to handle scissors can work with it. In addition to scissors, you may also need glue, pencils, rulers, paper cutters, colored jams, and various materials available.
-
The handiwork made of cardboard is as follows:1. Use scissors to cut off the perimeter of the carton.
2. Take out the yellow colored paper and use a pencil to draw lines and cut according to the size of the box.
3. Take out the violet colored paper and use a pencil to draw a line and cut it according to the size of the box again.
4. Paste the violet colored paper with a glue stick.
5. Paste the violet colored paper on the surface of the box.
6. Use scissors to cut off the excess edges around the box.
7. Paste the yellow paper with a glue stick.
8. Paste the yellow colored paper on the surface of the box.
9. Take out the violet narrow strip of colored paper.
10. Paste both sides of the colored paper with double-sided tape.
11. Remove the double-sided tape and bend the colored paper.
12. Glue the colored paper on both sides of the box as a handle.
<> handmade can enrich children's childhood life Now many babies are under strong pressure, daily life is arranged slowly, their original happy rock suspicion forest time has become less, which is not conducive to the healthy growth of the baby, but the handicraft late work, not only can let the baby learn things, but also enrich their lives, so that their childhood is full of joy.
Handmade can cultivate children's self-confidence The baby independently completes a handmade work is the need to use both hands and brains, in this process the child will also encounter a lot of problems, if you can insist on finishing, it is also a kind of perseverance of the rough acres, no matter what kind of handmade finished products of the baby, should be given praise and affirmation, so that children can build self-confidence.
-
The steps to make a handmade bookmark with paper are as follows:Material preparation: paper, scissors, colored pencils, rope.
The steps are as follows:
1. First of all, we need to find a piece of cardboard of the right size.
2. Then use scissors to cut out a U-shaped groove of the cardboard, and then round the cardboard.
3. Then use a colored pen to draw your favorite pattern on the cardboard.
4. At the same time, you can also make a small hole at the top of the bookmark, and then tie a tassel, so that it can be made of waste cardboard.
bookmarks were successful.
-
Tools Raw materials: 1 sheet of A4 paper
Steps: 1. Step 1, first divide 1 piece of A4 paper into 4 equal parts, take one of them, and fold its 2 long sides in half, leaving creases.
2. In the second step, fold the two corners of the short side of the right side to the middle crease respectively, and the short side is aligned with the crease.
3. In the third step, fold the upper and lower hypotenuse edges on the right side to the middle crease respectively, and align the hypotenuse with the crease.
4. Step 4: Close the upper and lower parts from the back along the crease in the middle.
5. Step 5: Fold the 2 hypotenuse edges on the front and back to the top of the stacked edges respectively, and align the 2 hypotenuses with the stacked edges.
6. Step 6: Pinch the overlapping edge in the middle of the above picture, stand it upright, and then turn the edges on both sides outward about 90 degrees respectively as the wing of the aircraft, and finally adjust the shape slightly, so that the simplest aircraft is folded.
-
<> "Hand DIY Storage Box.
Double-sided pen design.
Double-drawer multi-compartment.
Retro literature. Cardboard bottom edge stitching.
The sides are thickened, and the partition is fixed in the middle.
Snap into the diaphragm (the same size as the bottom plate) to fix the front side baffle and the middle baffle.
The front and rear sides are fixed with partitions.
The wrapping paper is decorated quickly.
Make 2 small drawers for grinding books.
1 large and 1 small cardboard sticker together to make a hand-held game positively.
The handle is fixed at the midpoint of the drawer.
Retro sticker decoration.
Homemade double-drawer vintage storage box.
-
1. Handmade name: Meng Meng Cow. Material preparation: corrugated paper box, white cardboard, black cardboard, paper tube, black pen, ruler, glue, scissors.
2. Production steps: according to your own liking, how big you want the cow to be, cut out all parts of the cow's body, including the front side plate of the cow's body, the back side plate of the cow's body, and the sides of the cow's body.
3. Paste the bottom plate of the cow's bent body, the front and back of the cow's body, and pay attention to leave a space of about one centimeter at the bottom plate of the box to facilitate the feet of the cow when waiting for the bench to be buried.
4. Make an oblique trapezoidal cardboard, and then paste the trapezoidal cardboard on the triangle at the front of the second step, so that the cow's head is roughly formed.
5. Cut out a trapezoidal shape and place it in the vacant part below the figure in the third step.
6. Everyone knows that there are some black parts on the cow's body, so cut out different shapes with black cardboard and paste them on the carton.
7. Cut out the cow's ears with cardboard.
8. Cut the two paper tubes, to the same height and size of the small paper tubes, as the feet of the cow, and then paste the four small paper tubes on the bottom plate of one centimeter reserved in the second step.
9. Roll out two round noses and a small tail with corrugated paper.
10. Use white cardboard and black cardboard to make a pair of cow eyes, and then paste them on the nose of the cow, so that the cute and cute carton cow is completed, is it very simple You can put things with it, or turn it into a tissue box.
You can use cardboard to turn waste into treasure to make Christmas trees is a good attempt and choice, in the Christmas to choose more suitable decoration or a very sophisticated thing, after all, for many handicraft lovers, did not try to make the process, if out of thin air let them make Christmas trees, the difficulty is still relatively large, but the use of cardboard this relatively hard paper to make Christmas trees can be easily completed with the tutorial. Straight boards are usually brown, so you need to use some other colors of paper to make the straight board have a green structure to make it look more like a Christmas tree, so when we finished the cardboard Christmas tree, we also need to wrap the tree with colored paper.
**Introduce many little girls are very fond of Barbie dolls, but the Barbie dolls sold on the market are relatively expensive, so please follow us, use your brain and your hands, and make a unique Barbie doll for you. >>>More
Drag the boat over and click on the stakes.
Put things on the paper and fold them in the middle of the four sides or four corners.
Steps to make a small box of paper:
1. Prepare a rectangular piece of paper first, fold the corner of any piece of paper diagonally, align the edges, and then trim off the excess paper. Since you're folding a paper box, it's important to cut the paper into squares first. >>>More