What to do if the ultra light clay dries, how to get the ultra light clay sticks to the wall and dri

The clay will dry out if you don't use it for a long time! I believe that many friends who play clay will encounter this problem, so how can we make ultra-light clay recover from scratch? Don't worry, just follow these steps!

1.Cut the clay into small pieces, the smaller the better

2.Then add water and soak!

3.The soaking time must not be too long, about 10 seconds or so, and the water can be poured out!

4.And then you'll find that the clay becomes like this

5.Buckle out the clay and rub it patiently and slowly like kneading dough 6During this period, you should keep rubbing, you can rub it into various fun shapes to pass the time!

7.Eventually, the clay becomes like this! It's back to its original form, and there's a wood!

8.It doesn't matter if you add too much water, you can use this method of stretching strips to squeeze out the excess water

Write at the end! When you save the clay, you must pay attention to the closure, preferably in a closed, dry space, if the space is too wet, it may also cause the clay to grow hair!

Summary. 1. If it's dry, cut it off directly, just scrape it with a tool and wipe it off with a wet rag, which will be better.

2. You can also use heating to soften the clay to help, so the effect is also good, just be careful not to take too long.

3. It is best to get this clay down as soon as possible, otherwise it will be easy to stick to it after too long, and it will not be easy to get it down again and damage the wall.

How to get the ultra-light clay sticky to the wall and dry.

Hello, I'm glad to be able to answer your questions. As far as I know, it can be scraped off with a razor. Of course, you can also soften it with a hot water bottle and then get it down, but you can pay attention to lighter.

1. If it's dry, cut it off directly, just scrape it with a tool and wipe it off with a wet rag, which will be better. 2. You can also use heating to soften the clay to help, so the effect is also good, just be careful not to take too long. 3. It is best to get this clay down as soon as possible, otherwise it will be easy to stick to it after too long, and it will not be easy to get it down again and damage the wall.

You can add a small amount of water to rub it.

Another method is to cut the dry and hard clay into small pieces with a knife, add more water than the amount of clay to soak it, soak it for about 10 seconds, and then rub it repeatedly, and then filter out the excess water that exceeds the clay. Wet clay pieces for 1-2 hours, not too dry place, take out the melted clay and knead, at the beginning the clay will stick to the hands, a long time will slowly become soft, will not stick to the hands.

The ultra-light clay sticks to the wall and dries how to get it down pro! Hello, Zen Chaos is happy to answer for you. Removal method:

Soak the clean towel and wipe it off a few more times, don't go too hard to upshift, otherwise the wall skin will fall off. After wiping it clean, wait for the water on the wall to dry, and then wipe it again with liquor, so that the wall skin will not become moldy. Or use a small brush to dip the stool in water and brush it on the surface of the clay, a small amount of many times.

You can spray some water on the clay, wait a while, and then gently wipe it with a towel, and it's okay, I hope mine can help you! Do you have any other questions?

1. It takes 3 hours for the surface to air dry, and the small ball with a diameter of 1 2cm is estimated to be dry for at least a week, about 2 weeks. It also depends on the working environment and the volume of the object, if your environment is dry or hot, or the surface area is relatively large, the volume is relatively small, the drying speed will be accelerated.

2. Because most people are too lazy to wait for so much time, they generally do not wait for natural air drying, and can use light or hot air heating (incandescent lamp or hair dryer, heater) to speed up drying to save time, and if cracking, the surface can be flattened by filling and polishing. Of course, after the whole is finished, it can be left in a ventilated place to air dry, but pay attention to dustproof.