How to fold a box with paper, how to fold a box with paper

Steps to make a small box of paper:

1. Prepare a rectangular piece of paper first, fold the corner of any piece of paper diagonally, align the edges, and then trim off the excess paper. Since you're folding a paper box, it's important to cut the paper into squares first.

2. Fold colored paper in half. Press the crease with your finger and open the paper.

3. Fold the colored paper in half from the other side. Again, use your fingers to press the crease and open it again. At this point, there are two creases on the paper that cross vertically in the center.

4. Fold the four corners of the paper towards the center. Fold each corner of the square toward the center so that all four corners converge in the center. Press the crease with your fingers.

After folding, adjust the position of the paper so that the folded small square is placed in front of you without bias. This time you don't need to open it after folding.

5. Fold the top and bottom sides to the middle. Press the creases with your finger to fix them.

6. Open the origami from one direction. Fold the triangle in one direction and the triangle in the other vertical direction still inward.

7. Fold the longer sides to the middle and fold the original folded triangle into it. Press the crease with your finger and the note looks like a tie with two tips.

Prepare the material: square pieces of paper.

<>15. Done.

Fold the box with paper as follows:

1. Find a rectangular piece of paper with a slightly hard texture.

2. Spread the paper horizontally and fold the left and right ends in half. Fold the folded side in half. Open one side of the paper, center the crease left by the second fold, and fold the two corners of the paper in the middle of each direction.

3. Spread out all the paper, and we will see an hourglass-shaped crease mark in the middle of the paper.

4. Fold the paper in half along the two crossed creases in the shape of the hourglass, and the ridges protruding from the fold must be on the same side.

5. Fold the middle line of the two crossed ridges inward.

6. Flatten the two sides that protrude. Fold the left and right corners to the crease mark in the middle.

7. Continue to fold the bottom two corners of the left and right sides outward along the bottom edges of the two triangles.

8. Turn the corners folded in the previous step upwards and wrap the hypotenuse of the triangle, and flatten them.

The origami thousand paper crane method is as follows

1. Find a square piece of paper.

2. Fold the paper in half into a rectangle. Fold the top half of the paper so that the top and bottom edges of the paper are facing each other, and then press out the creases. Then the paper.

3. Fold in half in a different direction. Fold from right to left. Fold out the creases first, and then the yards.

4. Block origami along the diagonal. Fold the top right corner down to the bottom left corner. Fold out the creases, and then unfold the mold which is open. Fold the top left corner down to the bottom right corner again. Fold out the creases, again.

5. Pull the lower right part of the upper half to the midline. Fold up. The same is true for the lower left section.

6. Fold the right corner of the upper half to the middle crease. When you do this, the lower right side will be flush with the crease. The same is true on the left.

7. Fold the top corner down so that the crease is aligned with the horizontal line folded in the previous step.

8. Put the creases of the last three steps. When this is done, there is another square with a face-down opening in the middle.

9. Fold the bottom corner of the square up to the top corner along the horizontal crease folded in the previous step. Fold the two creases of the top half of the piece in the opposite direction to their natural folds, so that the creases are reversed. Pull the outer edge of the paper to the middle and flatten it.

This creates a diamond shape with one wing sticking out on the left and right, which can be folded according to the fold line.

The folding method of the carton is as follows:1. Prepare a rectangular piece of paper and fold the paper in half.

2. After that, fold it in half again, as shown in the figure below.

3. Fold the side back and press it into a triangle, and the opposite side is also folded.

4. Fold one side of the triangle into the middle line.

5. After both sides are folded, fold the extra part on the bottom to the triangular head.

6. Finally, turn the triangle inward and adjust it into a square.

7. After adjustment, a carton will be folded out, and the two small ears on both sides can be used to lift it.

Materials required for origami boxes:A square-shaped piece of paper.

1. Fold it horizontally in half in half, and then fold it firmly in half in the middle. Then open it, and then you can see that there are four corners, and these four corners are folded in half.

2. After folding, face the two sides of the middle line horizontally, then spread out the paper, and fold it horizontally to both sides of the middle line again.

3. The folded part of the third-class old judgment is cut off, leaving creases.

4. Do the same operation in a different direction, and then stand up on both sides of the paper marks.

5. While standing up on both sides, fold the joints of both sides inward, and press the upper part down the creases.

6. Fold the other side in the same way, and the box is completed.

First prepare two squares of colored paper, fold one of them horizontally and vertically, then spread out the corners around the triangle to the middle, then turn over and fold two rectangles, and fold the two ends of the top as well, then fold the triangle diagonally up and down on the left and right sides, fold it in half to draw a crease, and then support the box along the crease, and finally fold another one with another piece of paper.

1. First use a piece of colored paper, fold it horizontally and vertically, and then spread out the corners around it and fold the triangle in half.

2. After that, turn over the wax thick back and forth to the central axis and fold two rectangles, and the two ends of the top also need to be folded.

3. Then fold the triangle diagonally up and down on the left and right sides, and fold it in half to draw creases.

4. Then prop up the box along the creases, and slowly open the box to make it smooth.

5. Finally, fold a lid to the box before using another piece of paper to photograph it, and then this beautiful carton will be folded.

Here's how to make a rectangular cardboard box:

1. Take a 15*15 cm square of paper, fold it in half along the diagonal, then fold one corner to the center point, then fold the corner to the crease, and then fold it to the diagonal.

2. Fold the diagonal of this corner in the same way, fold the remaining two corners upwards to form a rectangle, fold the two long sides of the rectangle to the middle line, and fold the two short sides to the intersection of the middle line and the oblique line.

3. Fold the two short sides into a vertical surface along the crease to form a cuboid, fold a slightly smaller cuboid in the same way, and put the two cuboids together in the bureau.

Hello, through a few simple steps to judge the file, use origami to fold out the simple and practical storage in life.

Step one, prepare a square of origami.

Step 2: Fold the origami in half up and down (grinding the opening downward).

Step 3: Fold the upper layer of paper in half upwards.

Step 4: Fold the right corner towards the center line by the dotted line. (The upper corners are only folded in a single layer of paper) <>

Step 5: Press the dotted line to the left and fold it to the right.

Step 6: Fold the origami paper in half.

Step 7: Place the origami opening downwards and fold it left and right in half to make a crease.

Step 8: Press down along the new crease. After folding, it is shown below.

Too many small things at home? Things are not easy to sort and organize? Let's fold cute cardboard boxes together and make the most of the space. You can also make full use of the waste paper around you, which is in line with low-carbon environmental protection!

<> fold the paper in half in parallel and open it, and then fold the other two sides in parallel again and open it. Fold the two corners in half, and then fold the other two corners in half. After folding, open it, turn it over, and fold the four corners towards the center point respectively.

Fold one of the sides towards the center, then fold the symmetrical other side, press it after folding it to make the crease more obvious, open the folded edge, and now fold the other two sides in half towards the center. Open the two sides of the previous fold at a 90-degree angle, fold the corner of one of the openings, and press it with your fingers when you fold it up. Press the corner down to the bottom of the box, and the other side can also be laughing and arguing.

Prepare a square paper, fold the paper symmetrically horizontally and vertically, fold it into a small square along the fold, then fold the triangle upwards, fold it symmetrically into strips along the bottom, and use the same method on the reverse side, and then turn the corners left and right to fold the triangle in the middle, and the sharp corners at the top are folded down, and finally open the carton, and the simple and practical origami box is folded.

1. Prepare a square piece of paper first, which can be determined according to the size of the box you need;

2. Fold the square horizontally and vertically symmetrically, and select a diagonal line to fold it into a small square;

3. After that, fold the triangle upwards, fold the triangle downwards and align with the crease in the middle, fold it symmetrically into strips along the downward, and use the same method on the reverse side.

4. Then turn the left and right, fold the corners to the middle of the triangle and align it along the central axis, and fold the four corners of the front and back, left and right

5. Finally, fold the top sharp corners downward, align with the bottom sharp corners, and open the carton from the middle.