How to turn on the Corvoz low beam, where is the switch of the Corvoz low beam

The Kowoz light switch is on the lower left of the steering wheel, the knob under the air conditioning port is to the right ** is the width, twice is the headlight, the left lever of the steering wheel is forward for a long time high beam, and the back is instantaneous flashing.

At night, the combination switch rotates forward one bar to turn on the instrument cluster light, and one switch turns to turn the low beam. The low beam can be turned on at night when there are street lights on the road, and the low beam can also be turned on when there are pedestrians on the side of the road at night, and the low beam lights are turned on on narrow roads and narrow bridge curves.

The headlights are available in two forms: high beam and low beam. Use low beams on roads with street lights in urban areas, and turn on high beams when driving on roads without street lights or highways. When passing through an intersection or overtaking, alternately change the high and low beams to prompt.

Night walking wide light, commonly known as"Small lights"It is used to display the width and length of the vehicle at night, prompting other vehicles and pedestrians to see it. When you can't see clearly behind you in the rearview mirror, it's time to turn on small lights, including on rainy days.

If the Corvoz lights are controlled by the light lever on the lower left side of the steering wheel, most of them are operated as follows: 1Screw the end of the light lever forward to the first gear - the width indicator light.

2.Twist the end of the light lever forward for the second gear, the low beam.

3.Nudge the light lever forward in the low beam position – switch to the high beam (the high beam logo is also displayed on the instrument cluster); Dial back again – restore the low beam.

I don't know if the above operation is suitable for your car, for reference.

The method of the new Corvoz high beams:

1. The use of high beams is generally through the front dial or inward dial of the winner, and the front dial is dialed forward, and the high beam is always turned on;

2. Dial it inward, and the high and low beams flash. When the high beam is in use, be sure to turn off the high beam if you encounter a car return;

3. Wait for the end of the car and then turn on the high beams, so as to avoid your high beams from shaking to the other driver's sight and causing accidents, which is also the standard of civilized driving.

Chevrolet Corvoz low beam how to turn on Chevrolet Corvoz ( check transaction price |Detailed explanation of the model) How to turn on the low beam Chevrolet Kovoz method of turning on the high and low beams: 1. Chevrolet Kovoz cars are all lever switches and knob switches, of which the lever type is the main, and it is also the most common; 2. When you need to turn on the high beam, just press the lever down gently, and the knob switch only has the gear of the Qiaozu high beam. Turn the light control to turn on the handle of filial piety, change to the position of the high beam, and the high beam can be lit; 3. Generally speaking, flip the switch to the engine compartment position, and the high beam will be turned on all the time; Dial back one gear, turn off the high beams, and restore the low beams; Then dial a gear in the direction of the driver, the temporary high beam flashing lights, after releasing the switch, the switch will automatically return to the low beam gear; 4. This is usually used to remind the vehicles in the opposite lane, that is, the alternation of high and low lights.

Although the high beams are turned on as soon as they are flicked out, there must be a condition for turning on the high beams, and the disadvantage is to turn on the low beams. Otherwise, there is no way to turn on the high beam when operating in other light gears. However, there is no limit to flashing the high beams once in the in, and it can be operated even with the lights turned off.

There is no daytime running light switch in this car of Corvoz, as long as the power is turned on, the function of the daytime running lights is:

1. It is to make the vehicle easier to recognize when driving in the daytime. Its effect is not to make the driver see the road, but to let others know that a car is coming. Therefore, this kind of lamp is not a lighting lamp, but a signal lamp;

2. Of course, the installation of daytime driving lights can make the car look cooler and more dazzling, but the biggest effect of daytime driving lights is not in the appearance, but in providing the recognizability of the vehicle;

3. Turn on the daytime running lights when driving abroad, reduce vehicle accidents, and also reduce the probability of death in car accidents. In short, the purpose of daytime running lights is for traffic safety.

The Chevrolet Corvoz light switch and instrument control button are combined on the paddle on the left side of the steering wheel, and the light switch **:

Instrument button control: select the menu and function, press the menu function key, you can switch the menu selection. Turn the up and down buttons of the adjustment wheel to browse the sub-pages of the main menu or set a value. Press the Set CLR key to select a function or confirm a message.

Light control: Pull the lever in your direction to make the high beam (high beam flash), and push the lever forward to make the high beam always on (note that do not use the high beam to keep the high beam high to avoid dazzling the other driver). Hit up to turn on the right turn signal, and down to turn on the left turn signal.

Note: 1. Please keep the headlights adjusted correctly, many drivers may have their high beams turned on all the time without noticing, and incorrect use may be fined.

2. If it may cause other vehicle drivers or pedestrians to dazzle, it is absolutely impossible to use the high beam or high beam supporting light change function.

3. If the vehicle's turn signal fails, the flashing frequency of the indicator light will be doubled.