Cross stitch can be treated in addition to the frame

Cross-stitch. It can be framed, but if the work is relatively large after being framed, it is not suitable for moving and carrying. When you don't want to hang it, it takes up more space.

In addition to framing, you can also frame a shaft, a shaft like a calligraphy painting, and draw Ayako in your favorite color.

Frame it, so that you can hang it, and when you don't hang it, you can roll it up like a painting, and it is easy to carry without taking up space.

There is also that you can find some textured cloth in the market that matches the content and style of your cross-stitch, go to the tailor shop to sew it according to the size you require, and make a cross-stitch tapestry like a tapestry-like style, the tassels for the hem decoration are also sold in the market, and you can iron it flat after you do it, so that it is very individual and very good-looking, and you don't want to hang it and fold it directly, that's all you know, I hope it will help you.

In addition to framing, cross-stitch can also be framed into a shaft, like a shaft like a calligraphy and painting, with your favorite color of calligraphy and painting Ayako framed, so that you can hang, when you don't hang can also be rolled up like a painting, it is easy to carry without taking up space. In addition, you can also find some textured cloth in the market that matches the content and style of your cross-stitch, go to the tailor shop to sew it according to the size you require, and make a cross-stitch tapestry like a tapestry-like style.

This suggestion is still framed, because as long as it is not framed in a particularly irregular place, the effect made is visually better than that of the unframed.

And if you press the scale with about the same amount of force, you can probably know it by multiplying it by g.

There are several ways to do this:

1. If it is a water-soluble pen, it will be automatically eliminated by blistering it with warm water.

2. If the water-soluble color pencil should run for a longer time, it is better to use hot water. Note that if it is a cross-stitch of poor quality, don't pull it, it will fade.

3. If it is not a special pen for cross-stitch, you can generally use warm washing liquid, put a little bit and hot water to soak together, and then gently scrub it with your hands, and finally wash it with water.

4. The last way is to ask the staff to help wash the frame when it is taken away.

Frequently Asked Questions about Cross Stitch Finished Products:

1. The lattice that can not be removed: many embroidery friends in order to be able to quickly and accurately complete the cross-stitch, often use the pen to draw the grid positioning of the embroidery cloth, this is a good method, we also recommend the use of this convenient embroidery auxiliary technology, many embroidery friends for convenience and economy, the use of ordinary pencils, water-based pen goods color pencils, etc., the result is often caused by the hard work to complete the embroidery piece because of the residual lattice that can not be removed and regret.

Using a professional cross-stitch water-soluble pen and following the correct cleaning method is the guarantee of a fast and good finished work.

2. Inconsistent crimping direction: It is not difficult to be consistent in the crimping direction, which is also the basic requirement for a qualified cross-stitch finished product. In fact, you don't need to deliberately press the line consistently, develop a good cross-stitch habit, and you can naturally embroider the work with the same direction of the line, and there is no specific requirement for the direction of the line, as long as the direction is consistent.

3. Ugly holes: There is also a problem that is not often encountered in the finished embroidery piece, but once it appears, it does have a serious impact on the effect of the embroidery piece, that is, the hole that appears due to the tight belt thread, when everyone embroiders cross-stitch, the grasp of the power of the hand to the thread is a feeling, and the force of the embroidery thread must be uniform and moderate, that is, not tight or loose.

1. First of all, take out the cardboard on the edge of the frame, and wipe the inside and outside of the instrument glass in the frame for backup.

2. Then start to iron the cross-stitch cloth after washing and drying, and be careful when ironing.

3. Next, it is fixed on the back panel of the frame, and everyone has a different way of fixing it, and the general store owner is glued to the frame, or it can be sewn on the back board with thread.

4. Then wrap the reverse thread with tape to protect the thread from being worn and broken, so that the cloth surface is uneven.

5. Load the glass, cardboard, and fixed back plate in turn, pin the metal buckles around with your hands, fix them, and you're done.

You can get a professional place table for making picture frames, which is much cheaper than in the cross-stitch shop, and you can also let them refer to the color and pattern matching on the cross-stitch drawings, and the effect is very good, the workmanship is also very good, and it is not expensive.

If you have to buy materials to do it yourself, one is that the cost is quite high, and the other is that you can't do it yourself, you must have a professional cardboard engraving machine, and you can't buy an engraving machine for the cross-stitch table.

If you don't use cardboard and just make a frame, it won't look good.

Shops that sell cross-stitch usually sell picture frames.

1. Soak the embroidered cross-stitch in detergent water and wash it, then dry it for later use.

2. Take out the cardboard and wipe the inside and outside of the instrument glass in the frame.

3. Start ironing the cross-stitch cloth after the bath.

4. Iron, fix it on the back plate of the frame, and sew it on the back plate with thread.

5. Wrap the reverse thread with tape to protect the thread and will not wear out.

6. Load the glass, cardboard, fix the back plate in turn, pin the metal buckle around it, and fix it.

Summary. Mounting shop".

"Generally, the shop that mounts the painting can frame cross-stitch, and there are many framed ones on Wende Road in Guangzhou.

There are two types of cross-stitch mounting, one is soft mounting, and the other is hard mounting.

Soft mounting: Like the traditional Chinese calligraphy and painting mounting method, it is mounted directly on special paper. Features:

It is easy to carry, easy to transport, suitable for collection, and can be rolled up and stored in a special barrel regardless of size. When embroidering, the needle angle is short, and the workmanship needs to be particularly fine. The main disadvantage is that it is easy to shrink and deform under the influence of humid and dry baths, and the embroidery needs to be soaked with water in the framing process, and the silk thread used in embroidery has a certain gloss, and it is easy to make the silk thread lose its luster after soaking in water, thereby affecting the color of the embroidery.

The framing time is long, it takes about a week.

Hard mounting: A common mounting method used in the process of framing cross-stitch now. After the cross-stitch embroidery is completed, the embroidered cross-stitch work is glued to the special thin wooden board directly on the bandage, and the bandage is removed after the glue is completely glued, and then the decorative cardboard is matched, and then framed.

Features: The color is not distorted, it is not allowed to be deformed when collecting, and the framing time is short. But large cross-stitch embroidery is not conducive to carrying.

The materials needed to clean the cross-stitch lines: salt, water, laundry detergent.

1. Prepare a basin of water.

2. Pour in a little salt.

3. Stir well with your hands.

4. Put the cross-stitch cloth into the basin.

5. Soak for ten minutes to ensure that the cross-stitch cloth is completely soaked with water.

6. Add laundry detergent to another basin of water.

7. Stir well.

8. Put the cross-stitch cloth soaked in salt water into the water.

9. Gently rub with your hands.

10. Finally, change the water and clean it.

Ten. 1. After this treatment, the cross-drawn grid will be washed off.

<> cross-stitch is all scattered and can be picked up. That is, after the needle comes up, it does not change hands, and directly connects the needle of the next needle. The speed of picking embroidery is fast and convenient. The following are the operation steps: 1. Thread the thread through the lower left hole of the lattice to be embroidered;

2. Thread the needle into the diagonal hole, and at the same time thread the needle out from the hole on the left side of the horizontal direction;

3. Then use the same method as 2 to thread the needle into the diagonal hole, and at the same time through the horizontal hole;

4. Repeat the process, embroider the cross from top to bottom, and in the state of 3, thread the thread into the lower right corner hole in the diagonal direction, and then penetrate it from the left hole in the horizontal direction; Middle.

5. Thread the line into the lower right corner hole in the diagonal direction again, and then pass through the hole in the left direction;

6. If you go back to the starting point, you can complete all the cross figures;

7. The lines on the back will be arranged parallel to each other, don't sell bent mountains and knots, just pass the lines through 3 to 4 lines arranged in parallel;

8. Cut off the excess thread and tie the knot in this way, no matter how you wash it, the thread will not loosen!

The lines of the cross-stitch frame are charged by the circumference: for example: 70cm long and 30cm wide

Line perimeter: (m m * 7 yuan (line unit price) = 17 yuan glass by square: yuan flat = 8 yuan back plate by square:

Yuan Ping = 8 yuan, cardboard is generally 5 yuan per sheet.

A total of framed **: 17 yuan + 16 yuan + 5 yuan = about 38 yuan The algorithm is still different in each place. Some of them are only squared:

Loss) * 120 yuan flat = about 37 yuan More information can be visited: Mingwang photo frame (cross-stitch mounting materials, machine wholesale, cross-stitch mounting technology training, cardboard carving tools).

It is charged according to the size of your drawing and the box you choose.

Go to your neighborhood cross-stitch shop and ask them to frame you. **Will be high. You can buy other cross-stitch products there.

If you buy it in a cross-stitch shop, the framing will be much cheaper. It depends on how square your embroidery is, and what material you want the frame to be.

2013-10-12 What is the method of cross-stitch framing? 1 2010-10-13 Cross-stitch framing. Framing is not too expensive, don't go to the cross-stitch monopoly to load, that ** is relatively high, my general practice.

It's good to go to a specialized cross-stitch shop, you can go to the place where you buy cross-stitch, so maybe it can be cheaper! Well,** it depends on the material of the box you choose!! Hehe, I'm also embroidering one, and it's done quickly, (*hee-hee......

You go to a cross-stitch shop and you tell him you want to frame it, and he'll show you a pattern. **Depends on the level of the framework.

Wash the grid marked with a pen on the cross-stitch, then let it dry and iron naturally, frame, and finish.

You can install it where you have a professional frame, and there are places that sell cross-stitch.

Go to the cross-stitch shop and install it, or it's a pity that the hard masterpiece is messed up.

Go to the cross-stitch shop and they'll get it for you!

It is the place to get a professional frame cross-stitch to go to the frame.

It's not specially framed, it's all pretty good.

Just go to a shop that frames calligraphy and paintings.

If you sell cross-stitch, you can frame it.