What is the capacity of 235 square meters of cold storage?

Cold storage construction is an indispensable facility for many industries, such as food processing, logistics, retail, etc. These industries need to store and transport large quantities of food and supplies, and cold storage can provide them with the right temperature and humidity environment to ensure the quality and safety of food and supplies. So, how much is a square meter of cold storage construction?

Generally speaking, the cost of cold storage construction is roughly 850-1250 yuan square meters. The exact cost varies depending on the materials used, the equipment and the construction requirements. Below we will analyze the impact of these factors on the cost of cold storage construction in detail.

First of all, the materials selected have an important impact on the construction cost of cold storage. In general, high-quality materials** are higher, but can guarantee the service life and stability of the cold storage. For example, choosing high-quality insulation materials and refrigeration equipment can have...

In this case, it should be able to reach about 600 cubic meters, which is no problem at all, and can achieve a very good storage effect.

The capacity of 235 square meters of cold storage should be large, the density of storage is not the same, the weight will be different, depending on your use, it is recommended to store different things and different temperature cold storage to improve the efficiency of cold storage.

At 235 meters, his capacity is very large, and it depends on whether it is as tall as him, that is, it can be multiplied directly.

This is the size of the volume, not the size of the area.

First of all, we have to determine its height to know how big it is, otherwise there is no way to determine it.

It depends on what you're packing, if you want to pack normal seafood products, I think you can pack 500 boxes.

Summary. Hello, dear; We're glad to answer your questions! The area of 20 cubic meters of cold storage is 5*2*2m; We must know that the length is multiplied by the width multiplied by the volume that is higher than the object.

Therefore, we set the height of the cold storage to be two meters, the width to be two meters, and the length to be five meters. We multiply five meters by two meters and then by two meters. It was calculated to be exactly equal to twenty cubic meters.

Therefore, the length of a cold storage of 20 cubic meters is five meters, the height is two meters, and the width is also two meters.

How much area is 20 cubic meters of cold storage.

Hello, dear; We're glad to answer your questions! The area of 20 cubic meters of cold storage is 5*2*2m; We must know that the length is multiplied by the width multiplied by the volume that is higher than the object. Therefore, we set the height of the cold storage to be two meters, the width to be two meters, and the length to be five meters.

We multiply five meters by two meters and then by two meters. It was calculated to be exactly equal to twenty cubic meters. Therefore, the length of a cold storage of 20 cubic meters is five meters, the height is two meters, and the width is also two meters.

An example of the area calculation of a cold storage is as follows: if a warehouse is 5 meters long, 3 meters wide and 2 meters high. Find the total area of its library.

5 3 2 30 square (this is the area of the upper and lower 2 bottoms of the library) 5 2 2 = 20 square (this is the area of the left and right sides of the library) 3 2 2 = 12 square (this is the area of the front and back 2 sides of the library) 30 + 20 + 12 = 62 square (this is the total area of the library).

Related to the use of the unit, the power consumption is directly related to the running time of the unit, and the running time of the unit is controlled by the temperature in the warehouse, in the case of storing the same goods, if the density of the library board is not enough, the insulation effect is not good, the power will also be together, and there is no fixed power value.

First of all, the refrigeration system will need to use evaporators, condensers, cold storage compressors and throttle valves, the use of how large the compressor is directly related to the amount of electricity, generally 20 cubic meters of small cold storage, can be configured with 3 to 5 horsepower compressor.

Secondly, it is necessary to determine what goods to put in the cold storage, how much is the temperature set in the cold storage, the lower the temperature, the higher the refrigeration requirements, and the greater the power consumption.

Another important factor is how often to open the cold storage door every day, because if the cold storage door is opened and closed frequently, the cold air in the cold storage will run out, which will cause a temperature difference, thereby increasing power consumption.

The following is a reference:

Summary. The tonnage of cold storage = the internal volume of the cold room x the volume utilization coefficient x the unit weight of the food.

Tons (m) m).

The volume is called the utilization factor.

How much area is 20 cubic meters of cold storage, and how many meters is the length, width and height of 20 cubic meters of cold storage? To this question we must know that the length multiplied by the width multiplied by the volume that is higher than the object. Therefore, we set the height of the cold storage to be two meters, the width to be two meters, and the length to be five meters.

We multiply five meters by two meters and then by two meters. It was calculated to be exactly equal to twenty cubic meters. Therefore, the length of a cold storage of 20 cubic meters is five meters, the height is two meters, and the width is also two meters.

I hope my answer is helpful to you, and finally I wish you good health and a good mood again! <>

Summary. Hello dear, 430 cubic cold storage needs about 20hp semi-enclosed unit according to the conventional configuration, but according to the different temperatures, the units of the cold storage need to be adjusted accordingly, for example, the refrigeration equipment used in the -18 freezer is more powerful than the 0 fresh storage, so the refrigeration unit should be selected according to the cold storage at different temperatures.

Hello dear, the 430 Lina Kuanqing Fang cold Qiaoqing warehouse needs about 20hp semi-enclosed unit according to the conventional configuration, but according to the different temperatures, the units of the cold storage need to be adjusted accordingly, such as the -18 freezer is more powerful than the refrigeration equipment in front of the hole used in the 0 fresh storage, so the refrigeration unit should be selected according to the cold storage at different temperatures.

According to the fresh-keeping cold storage as an example, the formula for calculating the refrigeration capacity of high-temperature active cold storage is, refrigeration capacity = positive deviation of cold storage volume 90; The positive deviation is based on the condensation temperature of frozen or refrigerated goods, the amount of warehousing, and the frequency of goods entering and leaving the warehouse, and the range is between 100-400W.

Summary. Cold storage is a kind of refrigeration equipment.

Cold storage refers to the use of artificial means to create an environment different from the outdoor temperature or humidity, and is also a constant temperature and humidity storage equipment for food, liquid, chemical, pharmaceutical, vaccine, scientific experiments and other items. Cold storage is usually located near the port of transport or the place of origin. Compared with refrigerators, cold storage has a larger refrigeration area and has the same refrigeration principle.

Hello, dear dear, I am happy to answer this question for you, how big is the unit of 430 cubic meters of cold storage.

Large cold storage of more than 400 cubic meters needs to be equipped with more than 200kw units.

Cold storage is a kind of refrigeration equipment. Cold storage refers to the use of artificial means to create an environment different from the outdoor temperature or humidity, and is also a constant temperature and humidity storage equipment for food, liquid, chemical, pharmaceutical, vaccine, scientific test socks and other items.

Cold storage is usually located near the port of transport or the place of origin. Compared with the refrigerator, the refrigeration area of the cold storage is larger and has the same refrigeration principle. Leak only.

Due to the different cooling capacity requirements of cold storage, the specific configuration of the unit size needs to be determined according to the actual situation. Generally speaking, a 430 cubic meter cold storage needs to be equipped with a chiller with a unit capacity of 5-8 kilowatts (50 80 hp). Such a unit can meet the cooling capacity demand of the cold storage without being excessively large, thus reducing the operating cost.

In addition, in order to better meet the cooling capacity demand of the cold storage, it is recommended to use constant temperature and humidity chillers, with a capacity of 6-10 kilowatts (60 100 hp). This kind of unit can better control the temperature and humidity of the cold storage while providing a higher cooling demand, so as to effectively protect the goods in the cold storage and avoid problems such as moisture and mildew.