What is a beef leg mustache called? What is a corbel in engineering?

The so-called beef leg beard is the piece on the belly of the cow's calf, which has tendons and meat, and tastes particularly good, so many people like to eat it.

The beef leg beard is the tendon meat on the beef leg, that is, the calf and thigh belly on the beef leg, which is the best meat in the beef leg meat

The beef leg mustache should be the meat of the beef tendon. For example, spiced beef brisket is a dish made with fresh beef leg and marinade as the main ingredients.

The corbel and the finch are the focus of carving and painting decoration in the ancient Han architecture. The corbel is an outward structure, for example, when building a house by one's own family, the cantilevered short beam added under the balcony in order to support the outward balcony is the corbel.

In addition, in the factory, the outer picks set up on the column body to hold the crane beam, etc., are corbels. The corbel has a variety of patterns, and it is full of the meaning of the owner's better.

The corbel is also called "horse leg" in some places, and it was only a short piece of wood stretched out from the column at the earliest to support the eaves part of the roof, that is, the brace, but because the brace is only composed of a single piece of wood, it is not only thin, but also there are not many places that can be decorated, so the craftsman takes the triangular open space between the back of the brace and the pillar as the part of decoration.

A carved wooden board is used to fill this gap, and the two parts are perfectly combined into a whole, which is called a corbel.

The local structure of the cantilever end and the hanging beam end is called the corbel. There must be a shelving structure between the hanging beam and the cantilever of the cantilever system, and the local structure of the cantilever end and the hanging beam end is usually called the corbel, also known as the beam support. In ancient architecture, the scientific name of corbel is called "brace".

The function of the corbel is to connect the cantilever beam with the hanging beam and transfer the load from the hanging beam.

It is the part that is picked out of the column and mainly bears the shear force. For example, the corbels on the plant columns are used to support the cantilever broken part of the crane girder bridge or the T-shaped rigid frame bridge.

I usually have a lot of meat to eat on top of the beef shank, so the beef leg beard is one of the meats inside.

The beef leg mustache you are talking about should be the meat of the beef tendon.

Beef shank, beef shank you said should be the meat of the beef tendon.

The corbel column is another name for the beam support. In ancient architecture, the scientific name of corbel is called "brace". There must be a shelving structure between the hanging beam and the cantilever of the cantilever system

The structural part of the cantilever girder bridge or T-shaped rigid frame bridge that can be connected with the hanging beam. It supports the vertical reaction force of the static load and the live load from the hanging beam and the horizontal force caused by the braking force and frictional resistance. Because the height of the corbel is usually less than half of the height of the beam, and there is a stress concentration at the corner, this part must be specially reinforced, and the stress of the reinforcement and concrete must be checked.

Beef leg pumpkin is named because it is shaped like a beef leg, this pumpkin has more fiber, and the taste is rough when fully ripe, so it is more suitable to eat beef leg pumpkin when it is more tender.

Usually the independent corbels belong to the beams (make their own houses), and if they are cast in situ with the slab, they can be counted in the slab, and those connected to the column can be counted in the column.

The corbel is the overhanging structure on the side of the column, the local structure of the cantilever end and the hanging beam end The corbel is not part of the cap beam The corbel is on the side of the column The cap beam is at the top of the column.

The corbel is also called a support.

Definition of support: A short cantilever that is subjected to a concentrated load.

What is a beef leg mustache called? This may be known, but it's not quite right, the beef leg arc seems to be beef tendon meat, or the piece of meat on the top of the beef leg, but it doesn't feel right.

Usually we do a good job of the plan by the translator to translate into English, and then review, but the translator saw that there is a word "cow leg" in this plan, and the translator doesn't understand what this "cow leg" means, and finally thought about it anyway, it's all legs, and the leg of mutton is easy to turn.

Leg beard is a very fatty piece of meat on the pork leg, and there have been many delicacies and famous dishes since ancient times. There are many different names in various places, some are called elbows, some are called Ding tellurium, and in some places they are called leg beards.

The beakin is on the corbel.

This is a newsletter that proves that the scientific name of the beef leg melon is curved pumpkin, also known as lagua.

Jiaodong ** Network October 12 (Correspondent Liu Jianmin) Speaking of beef leg melon, I think everyone may be familiar with it, and some places also call it it'Lagua'It can be seen in front of and behind the house in the countryside, on the edge of the field, and in the orchard, and it is a very common thing for farmers, and its scientific name is curved pumpkin.

Lagua is a vegetable, very similar to pumpkin, because it is exactly the same as the vine, leaf, flower, pulp, and baby of the pumpkin, but the tail end is longer and curved, and the color is dark green.

The corbel refers to a kind of structural member, which is used to support the load-bearing beam.

The corbel is a special form of cantilever beam, and when the length of the cantilever beam is short to a certain length, it is the corbel. The main difference between the two forces is that the failure of the cantilever beam is mainly due to the excessive negative bending moment of the root (the tensile stress of the upper part of the root is too large), while the corbel is mainly the shear failure of the root (the shear stress of the root is too large).

Corbel is not only used in steel structure engineering, but also in concrete engineering such as highways, water conservancy, and housing construction.

The corbel refers to the part that protrudes from the surface on the building or the column, which is called the corbel, and is mainly a stressed part. Let's give you a schematic diagram:

Only in industrial plants will there be corbels, that is, the section above the column, which is partially protruding, and the crane girder should be placed on it.

For this question, I think this sounds like a musical instrument, so you should know it if you look it up on the Internet.

Low Hu is the abbreviation of bass erhu, also known as "stuffy beard" and "big hu", which was created in the early 30s of the 20th century on the basis of Zhonghu to improve and expand the creation of bass string instruments. One of the early Wenchang stringed instruments of the Qin cavity. A type of huqin.

Its shape and structure are similar to those of the erhu but grow, the volume is larger than that of the middle hu, but the strings are thick and the handle is short, the drum is large and the skin is thin, and it belongs to the bow and string instrument category in the string instrument family. Its timbre is low and strong, the resonance is large, and it is mainly used as a low ** device in Cantonese opera. The strings are set for the inner 5 and the outer 2, and the inner and outer strings are respectively set by C-G (the positive line "upper six") according to the relationship between the fifths, but the range is not wide and the timbre is rough.

Before the introduction of cello and double bass, it was used to fill in the transition instruments of the bass part of the Chinese orchestra. Because of its imperfect acoustics and inconvenient playing, it began to decline at the end of the 20th century, and was replaced by cello (or Gehu) and double bass (bass Gehu) in Chinese orchestras, and is still used in Chaozhou**.

There are three types of low beards:

The small low beard, also known as the big beard, the second middle beard, the second middle ** device, is an octave lower than the erhu.

Medium low hu, low ** device, octave lower than medium hu.

The big low beard, the double low ** device, is an octave lower than the small low beard.

Since the 30s of the 20th century, Chaozhou ** has used low hu and Guangdong high hu, and the Chaozhou language calls the low hu a big string, and the high hu is called a violin (that is, a violin), and the string of the tide language refers to the coconut hu.

See also Erhu. Huqin bowed string instrument.

External links. Cantonese opera encyclopedia of opera network.

National musical instruments. Eight-tone golden bell chime special clock.

Cymbals and cymbalsIn the hip bell, the square rings, the gongs, the cloud gongs, the copper drums, the cymbals, the bells, the cymbals, the cymbals, the cloud plates, the gongs, the stones, the chimes.

Weaving chime Special chime.

Silk plucked strings. Guqin Se Zheng Gong Hou Pipa Liuqin Nguyen Yueqin Sanxian Qin Xuanqin Duxianqin Six-stringed Piano Mouth Strings Gongqin Rewafu Lingqin Zhuang Tianqin (Vietnamese: tính t u) Huo Busi Dongbula Yatok (Mongolian Zheng) (Vietnamese:

String Erhu, Sanhu, Sihu, Gaohu, Zhonghu, Low Hu, Niujiaohu, Gehu, Bass Gehu, Banhu, Jinghu, Jingerhu, Ma Guhu, Coconut Hu, Falling Hu, Falling Qin, Big Tube, Big Tube String, Hulu Hu, Tuhu, Jiaohu, Playing Qin, Matouqin, Shell String, Ox Leg Qin, Daguang String, Erxianzi, Huluqin, Laruan, Xiqin, Zheng Rolling, Qinghu, Yuehu, Gongqin, Chaohu, Guangdong Erxian, Qin Cavity Erxian, Hexagonal String, Trumpet String, Head String, Huer.

So, these are all low-hu.

The structure of the low hu is the same as that of the erhu, but it is larger than the middle hu and has a lower pronunciation, which is a low ** device in the folk band.

Low Hu: Abbreviation for "Bass Erhu". The low ** apparatus of the stringed instrument group in the folk band.

In China's national orchestral ensemble, there has always been a lack of excellent low-quality instruments. In the past, national bands mostly used Qin Hu (similar to today's Qin Qin) in Guangdong ** to play the bass. During the War of Resistance Against Japanese Aggression, the first workers in the liberated areas began to control the low-level hu, but it is still not perfect at present, and it is still being improved.

The structure, production and materials used for the low hu are the same as those for the erhu. Each part is larger than Zhonghu, and the pronunciation is lower than Zhonghu. There are two types of barrels: cylindrical and octagonal. The headstock style is mostly written in a book. Most of the skin is made of python skin, but there are also sheepskin or horse skins.

Experts believe that on the basis of the erhu, the use of a membrane-plate acoustic structure and a fretboard to take sound will be the development direction of bass stringed instruments. The low beard is used in the band to enhance the thickness of the band sound, and it is the basis of the band sound. In addition to folk bands, in folk bands such as Northern Blowing Song, Jiangnan Sizhu and Guangdong**, the low hu is also widely used.

The low hu is the performance of the bass erhu, which is similar in shape to the erhu, with two or three strings, the bow outside, the barrel covered with horse skin or sheepskin, and a fingerboard; It is a musical instrument erhu. It can be divided into: erhu, high hu, low hu, as well as banhu, zhonghu, and jinghu.

The differences are: 1, the erhu is mostly a solo instrument. 2. Gaohuduo is used in Guangdong**.

3. The low hu is the bass part in the band. 4. Banhu is mostly used for Qin cavity; It is a low ** instrument for playing.

The low hu is the abbreviation of the bass erhu, the material is the same as the erhu, the only difference is that the low hu is very large, so it can produce bass, filling the bass role in the Chinese orchestra. However, since the development of the low beard only began in the 1930s, it is still imperfect and even less common by the end of the 20th century, in part because it is difficult to play such a large volume of the low beard; Another reason is that the effect of the leehu and the bass lehu is better than the low-hu, so these two instruments are usually used.

Hello, Low Hu is the abbreviation of Bass Erhu. It belongs to a kind of low **.

The structure of the low hu is the same as that of the erhu, but it is larger than the middle hu and has a lower pronunciation.

There are three types of low-hu, large, medium and small, which are suitable for bands of different sizes.

Low Hu is short for Bass Erhu.

It is also called "stuffy beard" and "big beard".

It is an improvement on the basis of Zhonghu.

Enlarged and created bass string instruments.

There are three types of low beards:

Small low beard, also known as big beard, secondary middle beard, secondary medium ** device, octave lower than the erhu medium low hu, low ** device, octave lower than the middle hu.

The big low beard, the double low ** device, is an octave lower than the small low beard.

Low Hu is the abbreviation of "bass erhu", and the low ** instrument of the stringed instrument group in the national band. In China's national orchestral ensemble, there has been a lack of excellent low instruments, in the past, the national band mostly used the Qin Hu in Guangdong (similar to today's Qin Qin) to play the bass, during the War of Resistance Against Japanese Aggression, the first workers in the liberated areas began to control the low Hu, but it is still not perfect, and it is still continuing to improve.

What is a low hu, low hu is a relatively low sound erhu, in order to distinguish it from ordinary erhu, so it is called low hu, but the sound quality is very good, no less than other musical instruments.

The first pot is the abbreviation of bass erhu, the low ** instrument in the stringed instrument group of the national band. In other words, he is an erhu, but his voice is more at the bass level. During the War of Resistance Against Japanese Aggression, the first workers in the liberated areas began to produce, but it was still not perfect and continued to be improved.

The low hu refers to the bass melody area in the erhu instrument, which has a deep and strong timbre, and the low hu can perfectly express this timbre. That's the low beard.

Low Hu is the abbreviation of "bass erhu", and the low ** instrument of the stringed instrument group in the national band.

Low Hu: The barrel is half a coconut shell, and the skin is paulownia board; Gaohu: also called "Yuehu", the shape is the same as that of the erhu; Erhu:

The barrel is covered with python skin, and the timbre is soft, similar to the human voice; Zhonghu: that is, "alto erhu", the appearance is the same as the erhu, and the timbre is deep; Low hu: bass erhu, the shape is the same as the erhu, there are two or three strings, the bow is outside, the barrel is covered with horseskin or sheepskin, and there is a fingerboard; Gehu:

That is, the reform of the big erhu, the barrel is round, there is a fingerboard, and four strings.

Low Hu is the abbreviation of "bass erhu", the low ** instrument of the stringed instrument group in the national band, is the huqin music that is often played in the bass stage in the folk band, and it is very beautiful and charming to play.

Low Hu is a kind of erhu, which is a kind of huqin music that often plays the bass stage in the folk band, and the sound is relatively low, which belongs to the folk music flag.

Because low-hue is more difficult to learn and less practical. That's why very few people know about low beards.

Low Hu, short for bass erhu. Stringed instruments. In the fifties of this century, it was reformed on the basis of erhu.

There are three types of systems: large, medium and small. The headstock is carved with a dragon head or in the shape of a scroll. The barrel is mostly round and low-hu, the stem is 93 cm long, shaped or octagonal, 26 cm long, and the outer diameter of the front mouth is 23 cm.

Montenegre, sheepskin, or horseskin. Rear speaker. Silk strings or casing strings.

The chords are one octave lower than the Zhonghu, and the range is within two octaves.