Do I have to answer the fax when it rings? What s going on with the fax machine ringing all the time

1. Generally, if you set up automatic reception, you can receive it without answering, and now it can be said that almost all fax machines have their own automatic receiving function.

2. But after the fax is **, and it is a fax, when others call ** when they can't distinguish it, they still need to answer it, if it's a fax to give a signal.

No, almost all fax machines now have their own automatic receiving function!

Fax machines usually have three ways to answer:

1. Manual answering: After the fax machine rings, manually answer and connect the fax to the signal.

2. Automatic answer: After the fax machine rings, understand the fax signal.

3. Automatic answering: The fax machine rings for a period of time, and if there is no manual answer, it will be directly transferred to the fax state.

You can set it according to your needs, there is a set button on the fax, just a few more presses.

Depending on how your company is set up, the usual fax machine is dedicated to receiving faxes, and this kind of fax does not need to be answered, and can automatically receive faxes. This fax number is also dedicated, and people who are familiar with you will not call this number. Only those who are not familiar will fight.

In this case, if you are not an acquaintance, you don't have to take it, so as not to be all sales**. If there's really something urgent, they'll contact you separately.

Some are ** and fax one, you need to answer, this kind of fax machine to receive fax is required you to pick up the signal before receiving fax.

But depending on your question, your company's fax should be the former one, so you don't have to answer it.

1. There is a stored fax in the fax machine, or a received fax, put it on paper and print it out.

2. Check the paper, the fax machine may have a paper jam, if the consumer is not stuck, open the upper cover of the machine and close it again, repeat several times until the alarm is no longer called.

3. Restart the fax machine to get the liquid.

4. If the fax machine hardware is damaged, contact the after-sales maintenance and inspection.

Extension**, can not replace the fax machine to give signal;

The fax machine decomposes the original to be sent into many tiny units (called pixels) through an optical scanning system in a specified order, and then converts the brightness information of these tiny cells into electrical signals by the photoelectric conversion device in sequence, and sends them to the channel after amplification, encoding or modulation.

The receiver amplifies, decodes, or demodulates the received signal and copies a copy of the original in recorded form at the same scanning speed and sequence as the sender.

Fax machines can be divided into black and white fax machines and color fax machines according to their transmission colors; According to the occupied frequency band, it can be divided into narrowband fax machine (occupying one phone frequency band) and broadband fax machine (occupying 12 channels, 60 channels or wider frequency band).

Lift the extension handset or hands-free, then press"*+#+9"(asterisk + pound + 9) three buttons. If that doesn't work, try pressing the "asterisk key +9" again, and hopefully you will succeed.

He will first call ** and tell you to take the fax, let you give a signal, and you will press the biggest start button on the fax machine. The button logo should have a vertical bar in the middle of the diamond.

Hope it helps!!

Causes and workarounds:

1. **The attachment has electromagnetic interference. Solution: Leave the source of electromagnetic interference.

2. The other party hung up the fax, and there was a beeping sound. Workaround: Re-dial the fax.

3. If the network is interrupted or the network cannot be connected, there is a beeping sound, the solution: re-dial the fax.

4. Other fax failures, solutions: check the fault error**, solve the fault.

What model of machine? Is it connected correctly? The ** line connected to the fax machine must be the main incoming line (plugged in on the line interface), and then a wire (plugged in on the exe interface) is separated from the machine and connected to your landline.

The fax machine keeps ringing because there is a problem with the wiring;

The normal wiring method of the fax machine line is as if it is cracked and bumped down:

1. Advanced line to **;

2. Then go from the ** branch line to the fax machine.

Note: A splitter is required.

The fax machine is a communication device that uses scanning and photoelectric conversion technology to convert static images such as text sources, charts, and other documents into electrical signals, transmit them to the receiving end, and reproduce them in the form of records.

The receiving mode is not set to the automatic state, and you need to manually fax the other party.

To set it to receive automatically, manually receive pick up the handset and press Start Active.

To press Accept! Or maybe you only set up the ** function!

Yes, faxes are automatically received without answering, faxes can be received automatically.

How to set the fax machine to receive auto receive:

1. Check whether the display status of the display screen above the fax machine is similar to one of the two pictures below.

2. If the second case is displayed, you don't need to do anything, the fax machine has been set to automatically receive faxes.

3. If the first case is displayed, press the "Receive Mode" button on the right side of the fax machine to make the display above the fax machine the same as the second display above.

To the ground! Generally, the automatic reception is set up to have a call ring, three tones, and there are also non-answering ** automatic fax transfers, depending on your settings, if your fax machine is a straight line, and at the same time set up automatic reception, the other party does not need to answer when sending you a fax.

Yes, yes, it usually rings three times.

**The carrier frequency voltage of the line is not right, the reason is that the line is bad, there is a short circuit, and the line is changed. There is also a bad communication interface board will also cause the carrier frequency voltage is not right, 4338 interface board and motherboard together, if you determine that the line is no problem, you can only change the motherboard to try, this machine often encounters such problems,

The fax machine keeps ringing when the ** line is plugged in, because there is a problem with the wiring method;

The normal wiring method of the fax machine line is as follows:

1. Advanced line to **;

2. Then go from the ** branch line to the fax machine.

Note: A splitter is required.

A fax machine is a communication device that uses scanning and photoelectric conversion technology to convert documents, charts, and other static images into electrical signals, transmit them to the receiving end, and copy them in the form of records.

You can call HP after-sales ** with a landline and he will give you a satisfactory solution!

Causes and workarounds:

1. There is unreceived information stored in the fax machine.

Solution: Check the fax paper and press the receive button.

2. The fax machine is paperless.

Reason: In the case of running out of fax paper or jammed paper, the information will be automatically stored in the memory, and after changing the paper or eliminating the jammed paper, you can receive the stored information by pressing the receive button, and after receiving, the Didi sound will stop.

Workaround: Add paper.

1. When the **ring is within 5 sounds, it is impossible to judge whether it is a fax or**.

2. After 5 sounds, if it is a fax, it will automatically turn to receive a fax, and if it is, it will continue to ring.

3. If you pick up the ** within 5 sounds, and hear the long sound of "Di", there is a fax that needs to be received, or when the other party asks for a fax signal, press the start button of the fax machine, you can hang the handset and receive the fax.