Will Geely Binyue 1 5 shake?

The Binyue is powered by a turbocharged engine mated to a 7-speed DCT dual-clutch transmission with a maximum power of 130 kW and a maximum torque of 255 Nm at 1500-4000 rpm. This engine is jointly developed by Geely and Volvo, it is a three-cylinder engine, and from the data point of view, it is relatively high in the small displacement turbocharged power of the same displacement.

This engine is the three-cylinder power used on Lynk & Co, but in order to make the oil more adaptable, the compression ratio has been adjusted, so it is not like the one on Lynk & Co that can only add 95 gasoline, and now it can add 92 gasoline.

The power is easy to drive the Binyue, and the output at low torque gives a good impression, which is stronger than in Lynk & Co, and the fuel standard is lowered.

The Binyue is also tuned to reflect its sporty style, and it can be felt that the engineers have chosen a lighter throttle tuning, and the turbo intervenes quickly, and the power comes early.

There is no obvious pause in the transmission in low gears, the power output will be very smooth, the acceleration momentum in the middle of the high-speed section is still very strong, and there is no obvious noise in the three-cylinder.

The test drive section has high-speed and mountain roads, in terms of three-cylinder power, it performs well at high speeds and mountain climbs, and the throttle sensitivity is higher in sport mode, which is more useful for daily fast overtaking.

The suspension is still more comfortable, the bumps are thoroughly filtered, and the roll control is also good, but the seat wrapping feeling is stronger and there will be a better driving feeling.

However, when driving Binyue at high speed, if there are bumps and ups and downs, the body will be a little unstable, and the vehicle will feel a little lighter, which is compared with products of the same level, Haval's products are the most stable at high speeds.

In terms of noise reduction, Binyue is quite good in the same class, even at high speeds, the engine noise will not be obvious, and the control of road noise and wind noise also plays a good isolation effect, it can be said that the noise reduction level of Binyue at this level is one of the best.

Summary. Hello, dear. We're happy to answer your <>

The Geely Binyue jitter solution is as follows: This situation may be a problem with the exhaust system, and it is recommended that you consider checking the exhaust and throttle mechanism to identify the parts that are in question. If the throttle train is damaged, it should be replaced with a new one immediately to ensure that the throttle train works properly.

In addition, it is also recommended to check the engine filter, fuel filter and other components to see if there is any abnormal pollution, etc., and it is recommended that you change the oil in time and clean the engine and fuel system. <>

How to solve the jitters of Geely Binyue.

Hello, dear. We're happy to answer your <>

The solution to the Geely Binyue jitter is as follows: In this case, there may be a problem with the discharge system, and it is recommended that you consider checking the Paisen grinding and throttle mechanism to identify the parts that are in question. If the throttle mechanism is damaged, it should be replaced with a new part immediately to ensure that the throttle mechanism works properly.

In addition, it is also recommended to check the engine filter, fuel filter and other components to see if there is any abnormal pollution, etc., and it is recommended that you change the oil in time and clean the engine and fuel system. <>

What is the reason why the new Binyue cold car starts, and the engine is a little vibrating? It's only more than 2,000 kilometers??

Hello dear dear, when the car starts cold, the engine lubrication refers to the poor effect, the oil fluidity is poor, and it is relatively viscous, so there will be abnormal sound of mechanical wear, as well as the cold car start, the coolant temperature is relatively low, the mixture is relatively thick, and insufficient combustion will cause the engine to shake and, this is generally a normal phenomenon, and it will get better after the hot car. <>

Summary. If you start the vehicle or stop the vehicle without turning off the engine, you find that the body shakes obviously, it may mean that the vehicle has the following four conditions: serious engine carbon deposits, ignition system problems, unstable oil pressure, aging engine parts, serious engine carbon deposits, the most likely reason is that the throttle is too dirty or the fuel injector is too much carbon.

Hope mine can help you.

This question is up to me, it takes a little time to type, so please be patient.

The car has electricity. It can't catch fire. Just running on high speeds. The server paused for a moment. It won't catch fire. New cars. Maintenance has only been done.

Hello, Geely Binyue ignition vehicle shake generally refers to idle shake, if you start the vehicle or stop the vehicle without turning off the engine, find that the body shakes obviously, then it may mean that the vehicle has the following four conditions: the engine is serious carbon accumulation, ignition system problems, oil pressure is unstable, engine parts aging, hair Zheng Lu motor carbon deposition is serious, one of the most shouting positive belt may be due to the throttle valve is too dirty or the fuel injector is too much carbon. Hope mine can help you.

Summary. Hello, happy to answer your <>

Geely Binyue's brake jitter is caused by the failure of the wheel speed sensor, the uneven surface of the brake disc and brake pads, and the quality problems of the brake disc and brake pad itself. Solution: Overhaul wheel speed sensors, brake discs and brake pads.

The above are the reasons and solutions for Geely Binyue to shake the brakes.

Geely Binyue stepped on the brakes and shook.

Hello, happy to answer your <>

Geely Binyue's brake jitter is caused by the failure of the wheel speed sensor, the uneven surface of the brake disc and brake pads, and the quality of the brake disc and the brake pad itself. The solution is to overhaul the wheel speed sensor, brake disc brake pads.

The above is the reason for Geely Binyue stepping on the brakes and the solution to the loss.

Kiss <>

Extension: Wheel Speed Sensor Definition: A sensor used to measure the rotational speed of a car's wheels.

The wheel speed sensor is a sensor used to measure the speed of the wheels of a large number of cars. For modern cars, wheel speed information is essential. Therefore, the wheel speed sensor is one of the most critical sensors in modern cars.

Stepping on the brakes, the direction of shaking is painful.

Well, you overhaul the wheel speed sensors, the brake discs and brake pads.

1. Geely Binyue three-cylinder engine shaking. In fact, not only three-cylinder engines, but also four-cylinder engines will also have the phenomenon of shaking. It's just that the severity of the jitter varies.

2. As long as it is a gasoline engine, there will be shaking when running. Moreover, due to congenital factors, the three-cylinder engine will shake more than the four-cylinder one. In fact, not only three-cylinder engines, but all odd-numbered cylinders have more engine shake.

3. Although the manufacturer will make up for the vibration and noise of the three-cylinder engine through some technical means, it cannot be completely eliminated. And as the mileage of the vehicle increases, the jitter phenomenon will become more and more obvious.

4. As of September 12, 2019, the latest model on sale in Geely Binyue is the 2019 model, the official guide price: 10,000 yuan to dismantle the Dan service, a total of 13 models on sale, divided into two emission standards, China V and China VI.

5. The Binyue model is positioned as a small SUV, with a body size of 4330x1800x1609mm and a wheelbase of 2600mm.

6. There are two types of power square pants. The first type: it is equipped with an inline 3-cylinder turbocharged engine matched with a 6-speed brigade manual transmission, with a maximum power of 100kW and a maximum torque of 205Nm.

7. The second type: equipped with an in-line 3-cylinder turbocharged engine, matched with a 7-speed dual-clutch gearbox, with a maximum power of 130kW and a maximum torque of 255NM.

Geely Binyue's reputation for this car is still good, as Geely's SUV model, it performs well in all aspects.

The appearance of Binyue is worth mentioning compared with the same level of models, and the novelty and avant-garde is the main theme of its appearance, which is unforgettable. The front face, which is integrated with the modern scientific and technological language, is eye-catching, and the tail design and the front face form a beautiful echo between the front and back, which looks particularly harmonious. The visual effect of the side is the best, which is a major feature of the appearance of the whole car, and the tire shape is like the feet of a lion, which sets off the steadfastness and stability of Binyue.

Binyue interior structure is simple and stylish, the upper and lower equal central control design is neat and durable, the multi-function steering wheel design is novel, the interior panel and other places that are often touched by the body are made of soft package materials, and the door materials have a good feel to enhance the grade of Binyue in the eyes of others. On the whole, the interior of Binyue has reached a high level of price.

Geely Binyue space performance introduction

From the perspective of space, although Binyue is positioned as an SUV, but the competitiveness is not strong, 4330 * 1800 * 1609mm body number of state data, wheelbase is 2600mm, compared with Haval F5, Changan CS35, Emgrand GS, Binyue's space data has no obvious flash. From the actual experience, although a person with a height of 180 cm still has overhead space when sitting in the car, it feels cramped.

The last row barely accommodates 3 people, but only for thin statures. The front and back space is not long, and the legroom in the first row and the most violent back row is relatively narrow, and the legs are more uncomfortable when sitting for a long time. To sum up, Binyue's spatial performance is not satisfactory.

Replacing the filter element can solve the problem; You can use a multimeter to measure the resistance, and replace the one that is obviously several times larger; Replace all the spark plugs.

Extended: The causes of car engine idle jitter are:

1.Air filter dirty: air filter is designed to protect the engine to reduce wear, generally in about 10,000 kilometers to replace the orange stool, if the replacement is not timely, there will be insufficient air intake caused by low idle speed, and the engine shakes, as long as the filter element can be replaced.

2.High-voltage line break: High-voltage line break refers to the high-voltage wire core break, which can affect the ignition and cause the engine to shake.

3.Spark plug problem: spark plug has a life, the ignition efficiency is significantly reduced after more than 3-40,000 kilometers, and can affect the ignition, which is the most common failure, the spark plug can be replaced.

4.Abnormal water temperature: There is a normal range of engine operating temperature, and high water temperature will cause early ignition time, change in oil-oil mixing ratio, thinner oil viscosity, and poor lubrication performance.

The general fault cause is the jitter caused by the lack of antifreeze, the thermostat cannot be opened, the fan does not rotate, and the temperature of the temperature control switch is inaccurate.