How to set Midea electric kettle only to keep warm?

The design of the electric kettle, generally speaking, can not only set the thermal insulation effect, because it must be boiled by boiling water to automatically reach the temperature of thermal insulation, which is more in line with the design requirements of scientific hygiene and safety.

Therefore, in the process of using only different products, you can learn more from professional and technical personnel, master the correct use methods, and learn and communicate with others, and the following points must be paid attention to.

1. Respond in a timely manner when talking.

First of all, we must know how to respond, if others are very interested in saying a lot of things, and you don't have any expression, it will make people feel very embarrassed or uninteresting, so that the light words can only end hastily, and it will not help your language communication, so you should respond to others in a timely manner when talking to others.

2. Communicate attitude and respect each other.

The attitude when communicating is also very important, you should communicate modestly and friendly with the other party when communicating, and respect each other when talking, keep the body leaning forward during the conversation, not leaning back, and you can't lean your whole body on the chair, so that the whole person will look lazy.

3. Know how to listen when talking.

Listening is also a point to pay attention to in communication, when talking to others, we must take into account the feelings of others, but also listen to what the other party expresses, so that we can better communicate in language, otherwise it is like "chicken and duck talking", so that communication can not achieve the effect at all, and it is easy to misunderstand.

4. Don't always be self-centered.

When talking, we should also pay attention to an important point, don't always think that what you say and do is very important, always take yourself as the center, and other people's is not important, this situation is to be eliminated, which can easily cause others to be disgusted, and will also leave a bad impression on others.

Midea's electric kettle is a normal physical heat preservation, the heat preservation time is about 2-3 hours, and some of Midea's kettles have the function of energizing heat preservation.

Summary. Hello dear, it's an honor to serve you!

There are two ways to set the heat preservation temperature of the health pot: 1. After putting the items that need to be fired in the heat preservation pot, press and hold the temperature control button to adjust to the desired temperature, and then it will automatically jump to the heat preservation state after firing to a specific temperature; 2. When the items of the health pot are boiled, press the function button to adjust to the heat preservation function, so that the whole health pot is in a high temperature heat preservation state.

How to set the temperature of the insulation function of the Midea health pot.

Hello dear, it's an honor to serve you! There are two ways to set the insulation temperature of the health pot: first, after putting the items to be fired in the thermos pot, press and hold the temperature control button to adjust the burial cavity to the required temperature, and then it will automatically jump to the heat preservation state after the firing reaches a specific temperature; 2. When the items of the health pot are boiled, press the function button to adjust to the heat preservation function, so that the whole health pot will be in a high temperature insulation state at the liquid beam.

Hope it helps.

What is the reason why the multi-stage temperature control electric kettle is not heated when it is powered on, first of all, the light is on means that the whole machine is energized. There are several reasons why the kettle light is on but does not burn: 1. The heating plate is damaged.

Sohu 2. The thermostat or temperature fuse is damaged, resulting in the heating plate not being powered on. 3. The internal circuit is damaged, resulting in the heating plate not being energized. Solutions to the above problems:

1. The heating pipe is damaged and cannot be replaced, so the heating pipe and base of this electric kettle are formed at one time and cannot be repaired; The terminal of the heating pipe can be reconnected, and if it is broken, it can be repaired by spot welding machine; I hope I can help you.

1. It is a problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to automatically disconnect from the power supply, or turn on the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet so that it can not be powered off or energized normally; 2. If the electric kettle is energized and the heating plate is not heated, this fault should consider what material the electric kettle is; 3. If it is a plastic kettle, it is generally enough to replace the heating plate directly; 4. But if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the steel body of the stainless steel body is welded, there is no way to replace it, the heating plate of the stainless steel kettle, and some accessories of the kettle are not the same as the mold of each manufacturer, so if there is a problem with the electric kettle, it should be directly returned to the factory for maintenance. Bridge Attendant.

Summary. Hello there! What you want to know is probably that:

You see if the electric kettle you bought is not insulated, some kettles are only used to boil hot water, there is no thermal insulation function, the function of the electric kettle is heating, the electric kettle has no thermal insulation layer, the thermal insulation performance is very poor, please use a thermos cup or thermos bottle to keep warm. It is recommended that you change to a computer-type electric kettle, which has the unique function of boiling water and keeping warm.

Why don't you keep warm after heating the hot water kettle of Midea?

Hello there! What you want to know may be: you see if the electric kettle you bought is not insulated, some kettles are only used to boil hot water, there is no thermal insulation function, the function of the electric kettle is heating, the electric kettle has no thermal insulation layer, the thermal insulation performance is very poor, please use a thermos cup or thermos bottle to keep warm.

It is recommended that you change to a computer-type electric kettle, which has the unique function of boiling water and keeping warm.

If your kettle has a thermal insulation function: it may be that the normally closed contact surface of the thermal insulation switch is dirty or ablated, which makes the contact resistance of the contact too large, causing the contact to close and the circuit is not connected, the heating pipe is not heated, and the electric kettle cannot be insulated. At this time, the contact surface can be cleaned with fine sandpaper and then coated with a layer of tin.

If it is still not insulated, the insulation switch can be replaced. Hope this helps!

Midea electric water heater insulation, how to adjust the temperature to set the temperature.

Midea electric water heater insulation, how to adjust the temperature to set the temperature, the operation steps are as follows; 1. How to adjust the temperature of Midea water heater 1. There is an adjustment knob on the water tank, which can adjust the temperature sensed by the pointer on the temperature side, and the pointer will also be in different positions according to the different temperatures. The right side of the water heater is to adjust the temperature. If the temperature on the left side is higher than 50 degrees, it can be washed.

2. Open the water inlet, wait for the water heater to heat up, and when the indicator light indicates high temperature, adjust the water outlet to a temperature suitable for bathing through the mixing valve. Adjust it to position 3 4 on the right side and use it a few times to determine the right position, and the water temperature will drop. 2. How to buy water heaters 1. There are many brands of water heaters on the market, such as Midea water heaters, Haier water heaters, etc., which can also be divided into electric water heaters, gas water heaters, solar water heaters, etc. according to the nature of use.

Each of these water heaters has its own advantages and disadvantages, and we should understand it clearly before buying, and then buy the right Naiyan water heater according to our specific needs. 2. The quality of the water heater must be good, don't be greedy for a small bargain to choose the kind of three-no product Changsen silver, these water heaters do not have any quality assurance, and the problem can not be solved by after-sales service, and there may be potential safety hazards. We should try to choose a more famous brand of water heater, so that it will be more comfortable to use.

3. If you want to be able to bathe with hot water at any time, it is recommended not to buy a solar water heater, because the solar water heater relies on the heat of the sun to heat the water, in winter and spring, the heat is insufficient, the hot water is not enough, our bathing will become very inconvenient, it is recommended to buy an electric water heater. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

There may be several reasons why Midea's kettle is powered but doesn't boil water:

1.There is a leakage inside the cup of blue wax, which leads to a short circuit in the circuit. In this case, you should stop using it immediately, unplug the power plug, and send the electric kettle to a professional after-sales service center for maintenance and repair.

2.If there is a problem with the temperature sensor or temperature controller, the water temperature cannot be controlled or the water temperature exceeds the set temperature, and the system automatically shuts down. In this case, it is necessary to replace the corresponding electrical components or to clean off the impurities on the sensor.

3.Water leakage, resulting in a short circuit in the internal components. First of all, it is necessary to confirm whether there is a water leakage, and if there is, you should first pour out all the water inside the electric kettle and clean it, and then send it to the after-sales service center for maintenance.

4.Poor wire contact prevents electrical energy from being properly transferred into the electrical system. You need to check whether the power plug and wire are loose or rusty, and if so, you need to reconnect or replace the power plug and wire.

It should be noted that if you are not a professional, do not disassemble or overhaul electrical appliances such as electric kettles by yourself to avoid safety accidents. When using an electric kettle, the environment should be kept dry and avoid water or moisture entering the inside of the kettle or electrical appliance. At the same time, it should be cleaned and maintained regularly.

Summary. Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to turn on the water to automatically disconnect from the power supply, or turn on the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet so that it cannot be powered off or energized normally;

If the electric kettle is powered and the heating plate is not heated, this fault should consider what material the electric kettle is. If it is a plastic kettle, it is generally enough to replace the heating plate directly; However, if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the stainless steel body is welded and there is no way to replace it.

Midea's electric kettle is powered on and doesn't boil water, what's going on?

Hello, I am helping you to inquire about the relevant case and will reply to you immediately.

Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to turn on the water to automatically disconnect from the power supply, or turn on the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet so that it cannot be powered off or energized normally; If the electric kettle is powered and the heating plate is not heated, this fault should consider what material the electric kettle is. If it is a plastic kettle, it is generally enough to replace the heating plate directly; However, if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the stainless steel body is welded and there is no way to replace it.

Summary. Is it ** bought?

Instructions for use of Midea boiling water insulation integrated kettle.

Is it ** bought?

**On, or brick-and-mortar store?

Brick-and-mortar stores. It's said that it's a problem with the settings, and it hasn't been able to operate.

How much do you order for a fixed temperature?

It is currently 85 and is generally booked to 100

It's boiling.

You order 100 to try.

It is recommended that if you still can't book to 100, go directly to the physical store, they are responsible for this, and you shouldn't have bought it for long, right?