Can the seat belt just flash the lights and not call the police?

This is a feature for all cars and there is no recommendation to reset or cancel.

No, this can't be changed.

The alarm is to always remind you to install the driving, please cherish life.

Hello, this is set and cannot be changed.

Hello, this is designed by the manufacturer in accordance with national requirements and cannot be changed.

Check to see if the seat belt is buckled properly and if other doors are closed, these are all possible causes of the alarm.

Once the restraint force of the seat belt exceeds a certain limit, the force limiting device will appropriately relax the seat belt to keep the chest force stable. Therefore, the car seat belt plays the role of restraining displacement and buffering, absorbing impact energy, dissolving inertial force, and avoiding or reducing the degree of injury of drivers and passengers.

Main advantages: In daily travel, when the occupants fasten their seat belts, there is still a part of the webbing that is not pulled out, and this part of the webbing is rolled on a cylindrical reel, and the equipment where the reel is located is called a retractor.

The retractor is installed in the body body, which is generally difficult to see, and there is an angle sensitive device in the retractor, when the safety belt pulls out the speed reaches a certain threshold, the angle sensitive device is triggered, and the angle sensitive linkage will lock the device to jam the reel, so that the reel can not rotate, and the seat belt can not be pulled out. When the occupant is wearing the seat belt, it is easy to pull out the seat belt, and if the seat belt is pulled violently, it will be locked and cannot be pulled out.

After the seat belt is plugged in, the alarm will be called, and the display screen will still be red light, you have to check whether the seat belt is buckled properly, and whether other doors are closed, these are all possible reasons for the alarm.

When a passenger is detected in a seat in the car and the passenger is not wearing a seatbelt, the seatbelt light will be lit until the passenger is wearing a seatbelt or leaves the seat.

The icon of the seat belt is not fastened and the indicator light is also intuitively visible, and it is included in the car dashboard icon list that novices must understand when driving, mainly because of the importance of seat belts in car safety. There have been many reports of accidents without seat belts, and everyone must develop a good habit of wearing seat belts when they get in the car.

It is usually to detect whether the power supply is plugged in, there is a problem with the human sensor, or there is a problem with the entire sensor and test system.

Go to the repair shop to take a look, it's not a big problem, a few hundred, it's usually a line problem or a software problem.

Safety belt. There are several reasons why the indicator keeps flashing:

1. The light flashes when starting the vehicle self-inspection. If someone is not wearing a seatbelt (mainly the front seat) while driving, the light will turn on or flash, and you need to fasten your seatbelt.

2. There is a wire under the seat, which may be broken, so you should find a professional maintenance personnel.

3. It may be that there is a problem with the switch or instrument in the seat belt buckle and needs to be replaced, so you can find a professional maintenance personnel.

There are several reasons why the seatbelt indicator keeps flashing:

1. The light flashes when starting the vehicle self-inspection. If someone is not wearing a seatbelt (mainly the front seat) while driving, the light will light up or flash, and you need to fasten your seatbelt.

2. There is a wire under the seat, which may be broken, so you should find a professional maintenance personnel.

3. It may be that there is a problem with the switch or instrument in the seat belt buckle and needs to be replaced.

Extended Information: Precautions for the use of seat belts:

1. The main function of the shoulder straps and belts is to cushion the inertia of the driver and passengers forward or backward in the event of an accident, and try to fix them on the seat. When wearing the harness correctly, the shoulder straps should cross the ribcage and the waistband should fit snugly against the hip bone.

2. Be careful not to let the seat belt rub against the sharp blade in the use of the seat belt, so as not to damage the seat belt; Do not allow the seat back to tilt too much, otherwise the seat belt will not extend and retract properly; When there is no one in the seat, the seat belt should be sent to the retractor to avoid emergency braking.

when the buckle strikes on other objects.

3. The seat belt must be installed with the seat and shall not be disassembled at will; If the seat belt has been subjected to a strong tensile load during use, it should be replaced even if it is not damaged, and it should not be used continuously; When the seat belt is dirty, use soft soap and water as a cleaning solution, scrub it with a cloth or sponge, and do not use dyes and bleach.

It can corrode the seat belt and reduce its tensile strength.

Do not wipe it with a hard brush to avoid damage to the seat belt.

4. The safe use method must be guaranteed to be correct, so as to effectively reduce the injury and ensure the safety of passengers. Many people ignore the use of seat belts and think that it will not be a big deal. But accidents often happen in a split second, and it is too late to try to recover from them at the moment of the accident.

Therefore, everyone should develop a good habit of using seat belts to keep themselves away from danger.

The safety indicator cannot be turned off if it is flashing. Generally, when the safety indicator light is flashing when the car is not started, it means that the safety system on the car is working normally, if the engine is still flashing or has been on, it means that there is a problem with the safety system, and you need to go to the 4S shop or repair shop in time to check the fault and repair the car anti-theft system.

There's a thread under the seat to see if it's broken. If not, there is a problem with the switch in the seat belt buckle or the instrument that needs to be replaced.

The seat belt light keeps flashing may be caused by the seat belt not being plugged in properly, you can check whether the seat belt is plugged in.

It may be to remind you to fasten your seat belt, as long as you fasten the seat belt, it will make the orange high light at the circle ruler in a short circuit state, LED flashing may be the driver is broken, or poor contact, LED lamp beads and resistance damage is not very likely.

Restart the car engine and try to answer the filial piety test.

Turn off the main switch and try.

The alarm sound is mostly due to the detection of airbags and seat belts, and the preparation is complete. Under normal circumstances, loose wiring or poor plug contact will lead to such a situation. Whether you solve it yourself or go to the 4S store, you need to start from the airbag wire under the seat to check Hengjing.

If you are driving a vehicle, the car's seat belt warning light ruler is always flashing, first of all, you have to confirm whether your seat belt buckle is stuck into the card slot, if the card slot card slot wheel is still like this, it must be some signal transmission problems between them.

The car seat belt light keeps flashing, which may be mainly caused by not wearing a seat belt or a problem with the seat belt control unit wiring.

The car's seat belt is a good guess that the lights are flashing, and the rolling hole may be because the car has a problem with the induction, or it may be a reminder that you need to fasten your seat belt to check it.

If the car seat belt hand destroys the light and does not flash the socks, it should be that his and potato circuit is faulty, which needs to be repaired, otherwise, when wearing the seat belt, there should be a problem.

The light of the car seat belt keeps flashing, which should mean that your seat belt is not in place, so it will show that it is constantly flashing.

Obviously it is a problem with the seat belt indicator switch, under normal circumstances, the seat belt is plugged in, and the indicator light is off, and now this situation is a problem with the switch.

This means that you are not wearing a seatbelt, or that you are not wearing a seatbelt in the passenger seat, so he will remind you.

Is it Sakura that some passengers are not wearing seat belts on the Song Chi Ye, so the fault light is flashing, if there is no Heng Li people, it should be a problem with the safety belt, go to the 4S store to check.

Xue Li answered the Tielong car seat belt indicator, has been flashing, with the safety which touch the Hui belt indicator light also flashed, without the flash

Answer: It's obviously a problem with the safety noise with the indicator switch... Under normal circumstances, when wearing a seat belt, the indicator light will go off. , Now this situation is a matter of switching Let's go to the 4S store.

When the car is hit by a certain external pressure, the airbag will be opened The function of the airbag is that when the car body is hit by a violent Duan Qing, the airbag will automatically pop out, so as to protect the passenger's grip and avoid excessive injury.

1) When the seat belt is not fastened, the seat belt indicator light will always be faintly bright, and the seat belt needs to be fastened at this time; Toutoutiaolai.

2) The seat belt has been fastened, but the seat belt letter and carry indicator light on the car dashboard may be the socket of the seat belt sensor that is monitored and slid is loose, and the socket needs to be plugged in tightly. Lai Yan headlines.

Memorize the front seat belts, if it still doesn't work, take a look.

Hello car owner, the seat belt socket is not working.

In the past, after starting the car, the seat belt was prompted, accompanied by a warning sound, and after the prompt was one, it was no longer prompted, even if the seat belt was not worn. I don't know what's going on today, it's just a headache that keeps prompting, the warning sounds, and it doesn't sound when I put it on, what's going on? Pure urban area, there is no police on-site law enforcement, don't wear it, it's still worn at high speed, it's strange, nothing has moved, it was warned once before, and now it's a non-stop warning.

I also know that it can be solved by directly buckling the seat belt and then sitting on the seat, or buying a seat belt buckle can solve the problem. But the habit has changed, the seat belt alarm has been ringing, generally due to the abnormal state of the switch position inside the seat buckle of the seat belt, in this case, carefully check whether the inside of the seat belt buckle is dirty or is stuffed with foreign objects. Car seat belt is the most important safety device to ensure the safety of adults, when the car has an accidental collision or sudden braking, it will produce a great impact force, so that the driver or passenger and the steering wheel, windshield and other objects in the car have a secondary collision, causing serious injury.

Seat belts can bind the driver and passengers to the car seat, greatly reducing the displacement distance and minimizing the injury of the driver and passengers. When dressing up and fastening the seat belt, first adjust the position of the shoulder strap of the three-point Ama Mo Min full belt to the middle of the shoulder, and the crotch belt of the seat belt should be fastened as low as possible, and try to tie it to the hip position below the waist. When tying, it is necessary to pay attention to tidying up and not flipping, because flipping will greatly reduce the bearing strength of the seat belt and reduce its safety performance.

Insert the seat belt slot and hear a "click" to indicate that it is fully fastened. For pregnant women, it is mandatory to wear a seat belt when driving a vehicle. In fact, as long as the pregnant woman is protected, it is the greatest protection for the fetus.

Pregnant women should pay special attention to the position of the belt when using the seat belt, the seat belt belt should not be placed above the stomach, but should be straddled below the lower edge of the stomach, and the shoulder strap should only be across the chest**. Seat belt is designed for adults safety protection device, must be 140cm tall, weight 36kg or more can be used, children are small enough to reach the standard of wearing a car seat belt, seat belt for children not only do not play a protective role but also may strangle the neck to cause greater damage. The best way is to install a suitable child for the child's height and weight, so as to provide the child with the most targeted protection.

Abstract: In the process of using seat belts, sometimes there will be a situation that the seat belt does not rebound and the alarm light is always on, perhaps many people do not understand why the seat belt does not rebound, the alarm light is always on, and they do not know how to deal with the seat belt not rebounding. If the seat belt does not rebound, it may be that the seat belt is too dirty or dust enters the twisting place of the seat belt, and foreign objects enter the lock position of the seat belt.

Let's take a look at the solutions to the sharp bending section where the seat belt does not rebound and the alarm light is always on. 1. How to deal with the seat belt if it does not rebound.

Seat belts are definitely a life-safe device, so the vehicle has undergone many rigorous tests before leaving the factory. Generally speaking, the Anmingyu full belt of the car is mostly a "three-point seat belt", and its system is composed of webbing, mounting fixtures and retractors and other components. Among them, the webbing and mounting fixtures are visible to us, while the retractor is hidden in the B-pillar and cannot be seen, but it is the most complex mechanical part in the harness system, and its function is to store the webbing and lock the webbing to pull out.

The seat belt can't be tightened in time, it looks a little "loose", and the seat belt doesn't rebound, which may be a problem with the retractor. The following deals with seatbelt non-rebound for different reasons.

1. The webbing of the safety belt and the seat belt lock of the B-pillar accumulate more dirt at the place where it is in contact, and the seat belt does not rebound due to dirt. The solution is that the owner can use dish soap or some detergent to clean it, and wait for the seat belt to dry before returning to normal use.

2. The sliding buckle part of the seat belt is too close to the B-pillar, resulting in the retractor of the seat belt and the safety belt webbing not being in a straight line, resulting in the seat belt being blocked when rebounding and unable to return. The solution is that the owner can remove the fixing bolt and add a spring pad to make the slider buckle away from a little B-pillar to solve the problem.

3. The roller at the lower part of the seat belt is hindered in the return position and cannot return normally. The treatment method is that the owner can open the decorative plate, clean up the foreign objects, dust, etc. near the rollers, and then use some detergent to clean it.

Second, what is the matter with the seat belt alarm light always on.

1. The seat belt indicator will always be on when you are not wearing a seat belt, and you need to fasten your seat belt at this time.

2. The seat belt has been fastened, but the seat belt indicator light on the car dashboard is still on, it may be that the socket of the monitored seat belt sensor is loose, and the socket needs to be plugged in tightly.

3. Why do you call the police if you don't wear a seat belt?

When a passenger sits on the car seat, the seat position is monitored by the sensor occupying the seat, and the signal is sent to the control device, and the control device turns on the safety trigger switch to detect whether the seat belt is plugged in, this sensor is actually a pressure sensor switch, and when the passenger is on the seat, a voltage signal will be generated, which is transmitted to the car control unit. The sensor also serves the purpose of detecting whether the passenger is occupied, so as to confirm whether the passenger airbag is deployed to protect the passenger in the event of a car collision.