How do you do paint wipe? How to use the paint

1. The specific method of wiping paint with water is as follows:

1. First of all, there are three kinds of effects made by wood paint, one is varnish, the other is mixed oil, and the third is the pattern;

2. There are two kinds of patterns: one is color repair, and the other is color rubbing;

3. There are three types of color repair and color rubbing: one is open paint, the second is semi-closed, and the third is fully enclosed;

4. The most common difference between open paint and closed paint: open paint has a textured concave and convex feeling when you touch it, and generally does more with ash veneer, because the wood grain texture of ash is deep and easy to do open paint, and closed paint is the most common in the home Although there is wood grain, the surface is smooth to the touch;

5. The effect of sealing paint is to require the fullness of the paint film to be high, that is, the thicker the paint brush, the better, and the feel is required to be smooth. The effect of openness is to meet the requirements of the paint film should be on the board.

Under the front comb with sufficient protection, the lower the fullness, the better, that is, the thinner the paint film, the better, and the original wood grain of the board should be retained as much as possible, commonly known as the visible grain;

6. In terms of specific construction, if you want to do a closed effect, then the primer should be brushed a few more, and some boards with deep textures can also be scraped putty as appropriate.

The steps are as follows: 1. Rub the dark paint surface repeatedly with gauze dipped in thinner to make the color lighter to achieve uniform color depth.

2. Then polish the paint surface with water sandpaper to achieve a smooth and flat paint film.

3. Complementary color: Carry out unified polishing according to the background color, wipe the color with gauze, note: be sure to wipe evenly!

4. After drying, apply varnish twice.

Rosin perfume is corrosive in the use of cloth pine perfume to wipe the floor, the color on the floor will remove the surface color, so that the color of the floor fades, and then wipe the floor will make the surface color disappear, try to use less rosin perfume to wipe the surface color of the floor, in addition to the rosin perfume contains phenol, that is, formaldehyde is harmful to the human body, if you need to use rosin perfume to wipe off the color of the floor and then open the window for ventilation, disperse the formaldehyde smell in the room.

First of all, there are three kinds of effects made by wood paint, 2Varnish ,

3.Mixed oil, 4There are two types of patterns:

5.Color repair,

Hello, I personally recommend that you go directly to the local store for on-the-spot consultation, and what you understand by yourself is the most real.

Kiss! Hello, happy to answer your <>

The use of pro-paint is as follows: 1. If you want to paint the oil tanker evenly, the first thing is to first clean up all the items that need to be painted, and then polish them with sandpaper and wipe them with a slightly damp cloth. 2. Then don't get too much paint on the brush, because the brush starts to brush, first dip it on the furniture three to four times.

From top to bottom, apply the paint from the brush to all surfaces of the furniture. 3. The process of painting is not just a casual brush, so you should pay attention to the method. Start with the last dip, then brush upwards and return to where you started.

And there is also a downward brush in the direction of the void just now, brushing to the place where there is paint. Finally, go back and brush again, i.e. up, down, and up three times, and the brush is done. 4. And all the processes have been done, the best thing is that the paint on the brush has been evenly brushed on the furniture, remember to dry.

In this way, paint all the other areas, and then put the finished furniture in the shade and wait for it to dry. 5. General door and window frames are well protected: the doors, window frames, furniture and paint joints are protected by pasting color separation paper.

Wooden cabinets, partitions and other furniture should be sealed with newspaper to prevent paint dripping and staining the furniture. Hope mine can help you <>

Do you have any other questions?

First, wash the surface. Use a clean brush to remove dust and dirt on the surface of the damaged area; The purpose of this is to make up the paint to see that there are no impurities on the clumps, and the effect is better. Secondly, sandpaper grinding, repairing and leveling the burrs on the surface of the wood base, permeable fiber cherry blossom forking and other defects, polished with sandpaper, is neat at the corners.

If you want to make it even more colorful, you should spray a few more pieces of paint so that the color will be particularly bright.

The current paint has no effect on the future decoration. However, when decorating, the grip surface of the wall should be marked with marks. This is conducive to the absorption and protection of putty powder.

Re-covering the previous paint with putty can change the color of the paint or use delicate spray paint.

One is to add color essence to the polyurethane paint, ** in the sofa is used in this method, this method is the most common, convenient, I feel that there are two shortcomings, one is the basic skills of the paint to be high, the paint is not easy to become the same map color uneven, the second is the color in the paint to block the wood grain, the original beautiful wood grain is not obvious, the third is more wear, easy to fade, the edge of the sofa will fade.

The second is to wipe the color with the color treasure, and then spray varnish, the advantage is that it is easy to master, and it will not be because the basic skills of spray paint are not solid, resulting in uneven color, and the disadvantage is that the wood grain is relatively not clear enough, there is an odor, and the cost is slightly higher. Rubbing color treasures and thinners also cost money.

The third method, I think is the best way, focusing on the reference of self-taught friends. It's something I've practiced, and it's doable. This method of mine was ridiculed by an old painter because he had never seen this method and said that I was doing nonsense.

Specifically, the use of water-based color essence on the interior and exterior wall latex paint, for example, if I want mahogany color, I will buy red, yellow, and black, add water to the basin to adjust the desired color, and then roll it into a ball with a cloth, and wipe it directly on the wood (the wood must be treated well, that is, it must be ground very light and fine), you can use a little bit of color, and it is good to be on it several times. Then spray varnish (three primers, two coats, and after each paint, be sure to sandwork with fine sandpaper).

The fourth is to paint with a brush, and the result is very ugly, not to mention, the place I brushed was ground off with a belt sander. **The photo is not clear enough, it was taken casually before, and there is a chance to take a detailed photo, the shelves and sofas in the picture are the first method used, two small benches are the third method, and the other is the second method, which is to wipe the color treasure after wiping, varnish, because it is in a hurry, the family is fully mobilized, and the color is uneven after a day.

Pure wood is suitable for polishing the paint process. Because of its natural wood texture that cannot be replicated artificially, each board has its own unique texture.

Longtu water-based wax wood dyeing Half an hour after construction, one hour of drying, three days after normal use, 7 days to reach all the test indicators, suitable for indoor and outdoor use.

Polishing lacquer Scientific name wax wood dyeing, also known as wood wax oil, is one of the most primitive solid wood dyeing open lacquer.

After rubbing, the wood has a clear natural wood grain, especially high-grade wood, the appearance is more realistic, the three-dimensional sense is strong, and the visual impact is very strong. It also protects your wood. Non-toxic and tasteless, very environmentally friendly, with a wide variety of colors, classical and solemn, and not fading.

It can also be waterproof, sunscreen, stain-resistant, scrub-resistant, and the construction is simple and easy to learn.

Adhesion When it comes to the construction of wood wax oil (wood wax oil), we must first understand the principle of wood wax oil adhesion to wood, and the finish after grinding and polishing looks smooth and flat, and when viewed under the microscope, it is evenly covered with honeycomb-like pores. The ingredients of Longtu water-based environmentally friendly wood wax oil are natural colored minerals and palm oil and other formulas, after mixing with water, it has strong permeability, acting on the inside of the wood in the process of rubbing, so that it can complete the dyeing at the same time, and also greatly extend the service life of the wood.

Construction Dust out of the surface. Fill the larger pores with wood filler of similar color to wood, and gently smooth it with sandpaper after drying to ensure that the finish is dust-free; Add 40%-50% pure water to dilute Longtu environmentally friendly wood wax oil (twice the coating rate of other domestic brands); Use a slightly damp sponge or non-flannel cloth to apply wood wax oil in a circular manner, evenly fill the holes of the wood, and quickly rub along the wood grain; Remove the excess paint with a dry cloth in time, and use a dry cloth to test the wood grain from one end to the other to achieve a smooth and uniform finishing effect; After half an hour of drying, apply a layer of water-based sealing primer, and gently polish it with fine sandpaper after drying (this step can also be ignored); Finally, apply a layer of water-based topcoat with a brush (fine bristle brush) or spray application. After drying, lightly polish with fine sandpaper and apply the topcoat again.

The topcoat can be applied in 2-3 coats.

The above is my practice process, and the entire process of wiping paint will be different due to the different processes of various brands of wood wax oil.

Bottom color repair (make sure to make sure that the grain of the wood grain protrudes, and make the white wood line close to the color of the panel) - brush the primer (increase the thickness of the oil paint, so that the DAO paint is full) - spray the color paint (to achieve the specified color) - finally spray the varnish twice (protect the color paint does not fade).

1.Rubbing color is an important part of furniture painting. Generally, it is the first time to color furniture with pigments that are not strong adhesion. It can make the grain of the wood be filled, saving the amount of paint. Makes the wood grain clearer.