The water in the fish tank is very clear on the front, and the side is very blurry, and the high fin

Updated on healthy 2024-08-07
8 answers
  1. Anonymous users2024-02-15

    That's because your water quality itself is white, and when you look at it from the front, it's because the water body you see from the front is narrow. That is, if your tank is. The water you see in the front is only 500, and it must be clear when you see it, and the water you see on the side is meters deep, and of course what you can see is the real situation.

    This white mist is theoretically caused by the collapse of nitrifying bacteria, or by the fact that the nitrifying bacteria were not yet sound at the beginning of the voyage. There is also a feeding density and feeding amount, take the bottom filter as an example, the bottom filter is indeed a lot of filter material, but there is also a limit, the feeding density exceeds the limit of this filter material, and the number of nitrifying bacteria is too late to deal with the water pollution caused by these high-density fish, and there will be white mist water. The method is to add nitrifying bacteria culture medium and bacterial food at the beginning of the first situation, and wait for the nitrifying bacteria to be healthy.

    The second kind of feeding density is the problem of large feeding density, reducing the feeding density and less feeding, just like I raise colorful colors to try to achieve small density, but each one is a boutique.

  2. Anonymous users2024-02-14

    The reasons why the water in the fish tank is clear from the front and blurry from the side may be the following:

    1.There is no precipitation of impurities in the water body. This can be due to a number of reasons, such as too much organic matter, protein, or ammonia in the water, which causes impurities in the water to not settle completely, thus affecting the water quality.

    2.There is too much organic matter in the water body. This may be due to too much organic matter such as fish feces and food residues in the fish tank, which leads to poor water quality and affects the clarity of the water quality.

    3.There are too many microorganisms in the water body. This may be due to the presence of too many microorganisms in the water, resulting in turbidity and affecting the clarity of the water quality.

    4.The mineral content in the water body is too high. This may be due to the fact that the water contains too many minerals, such as calcium, magnesium, etc., which causes the water to become turbid and affects the clarity of the water quality.

    5.The temperature in the water body varies too much. This may be due to the excessive change in the water temperature in the fish tank, resulting in unstable water quality and affecting the clarity of the water quality.

    6.Insufficient light in a body of water. This may be due to the lack of light in the fish tank, which causes the plants in the water to be unable to photosynthesize, affecting the clarity of the water quality.

    To solve these problems, the following measures can be taken:

    1.Increase the frequency of water changes appropriately and change the water in the fish tank regularly to reduce the content of impurities and organic matter in the water.

    2.Reduce stocking density and avoid overcrowding to reduce water pollution.

    3.Increase the power of the filter and improve the filtration effect to reduce the impurities and organic matter content in the water.

    4.Reduce the amount of food you feed and avoid overfeeding to reduce water pollution.

    5.Adjust the mineral content of the water body, such as using water quality stabilizers, to reduce the turbidity of the water quality.

    6.Control the water temperature and avoid excessive fluctuations in water temperature to reduce water quality instability.

    7.Increase light intensity and time to promote photosynthesis of plants in the water to increase the clarity of water quality.

    If the above methods still do not solve the problem, it is recommended to consult a professional organization or expert for help.

  3. Anonymous users2024-02-13

    This is due to the glass and light, which is a normal phenomenon, and the water quality seen from the front is the real situation, because that side is for viewing.

  4. Anonymous users2024-02-12

    You change the water too much and cause the original digestive system to collapse, and the nitrifying bacteria die in large numbers, and the white stuff is the corpse of the nitrifying bacteria. Now it is necessary to turn on the oxygen pump and filter pump 24 hours a day to filter out the dead nitrifying bacteria, and increase oxygen to make new nitrifying bacteria form as soon as possible, and the water will be clear in 2-3 days. In the future, do not change a large amount of water, and the method of changing water is to change it frequently and change it less.

  5. Anonymous users2024-02-11

    If the dust of the sand adheres to the wall, it is recommended to open the pump to filter, wash the filter cloth and change the water frequently, and release the fish into the tank after it is clear.

  6. Anonymous users2024-02-10

    Is the aquatic weed real, it's better to replace it with a real one, or it's an illusion caused by bad lighting, you can put it for a few days and use a clear plastic bag or other container to get some water to see.

  7. Anonymous users2024-02-09

    At first glance, there are a few questions:

    1. The white bottom sand is not washed, resulting in suspended solids.

    2. Fake aquatic weeds, no water purification effect.

    3. The submersible pump and the upper filter box are placed on the same side, and the overall circulation of the fish tank is not good.

    I don't know what fish you want to raise, so give me the following advice:

    1. If you raise goldfish and koi, forget it, and raise fish that like soft water, you must replace the bottom sand with non-carbonate.

    2. The water outlet of the upper filter box is adjusted to the other end of the fish tank, so that the water in the fish tank can be circulated as a whole.

    3. The filter material of the upper filter box can not simply put filter cotton, but the bottom should be put with ceramic rings, biochemical balls, etc., and nitrifying bacteria should be added, and the submersible pump can not be stopped for 24 hours.

    4. Look**Your tank is too close to the window, it is estimated that it will not be long before the tank will be full of green algae, and prepare for algae suppression in advance.

    The fish tank is first put in water for a few days in advance to release the fish, in order to remove the chlorine that is toxic to the fish in the tap water.

    Under normal circumstances, it takes about a week for a tank with bottom sand and bottom mud to be clear from the opening of the tank, and I don't know how many days you have put it.

  8. Anonymous users2024-02-08

    1.If you have aquatic plants in the fish tank (aquatic plants can purify the water quality), then raise a few scavengers (note: the main food of the scavengers is moss, not to eat fish poop, this should not be misunderstood), remove the moss on the tank wall, the general tank is enough to raise three or five, depending on the situation.

    2.There are many fish in the tank, feed more, eat more, especially like parrot fish, even if there are aquatic plants, you still have to change the water, and it is almost the same to smoke once every three days.

    3.If there is a cushion of sand in the fish tank, it will be better, and the fish feces will sink to the sand crevices, so you don't have to suck too diligently.

    4.The quality of the filter pump also directly affects the clarity of the water quality, if the water in the fish tank is mixed quickly, it is recommended to install a filter barrel, three or four hundred pieces are almost, and it can be used for about three years.

    5.After cleaning the fish tank, when changing the water (generally the water changed does not exceed 1 3 of the original water volume of the fish tank), add an appropriate amount of water clarifier and water quality stabilizer according to the instructions. Remember, don't add more.

    6.Don't feed the fish too often, it is enough to feed it regularly 1-2 times a day, and it is best to eat it just after each feeding. Otherwise, the fish feed that cannot be eaten will easily fade and muddy the water if soaked in water (especially the average quality fish feed).

    7.Do not turn off the oxygenation equipment and filtration equipment when you sleep at night, and the light in the lampshade can be turned off or not.

Related questions
10 answers2024-08-07

The fishy smell of the water in the fish tank indicates that the fish have been sick or dead, and at this time it is necessary to disinfect it with potassium permanganate and change the water again. >>>More

13 answers2024-08-07

Regardless of the cause of the fishy smell in the fish tank, if it stinks frequently, it is best to treat it thoroughly as long as the conditions allow. Temporarily transfer the fish to other fish tanks or containers, vacate the fish tank, and then soak the dirty fish tank with disinfectant and disinfectant to clean it, generally with white vinegar, edible or disinfectant alcohol, potassium permanganate solution, bleaching powder, 84 disinfectant, etc., which can not only sterilize, but also remove the smell, note that the disinfectant must be fully rinsed with water after washing. <> >>>More

8 answers2024-08-07

Actually you are overly luxurious, resulting in muddy waters. A submersible pump can muddy the water in the fish tank, and with the addition of an oxygenation pump, it is no wonder that there is so much gas in the water without turning white. No matter how good the water quality is, it can't withstand such tossing and stirring, not to mention fish feces, filter sponges, etc. can be polluted. >>>More

3 answers2024-08-07

<> Ornamental Fish Turbidity in the water quality of ornamental fish is a common problem, and there are many reasons why the water becomes turbid. Before finding out the cause, you also need to save the turbid water quality, so I have compiled six methods for you to refer to. >>>More

7 answers2024-08-07

1: The first step is to pour out half of the water in the fish tank, if it is a large fish tank, you can scoop it out with a water spoon, and you can use a water hose to export. >>>More