Samsung mobile phone, want to flash, where can I find the ROM package of the flash?

I'm very sorry, but the official website of Samsung mobile phones does not provide flashing software. Due to the risks associated with flashing, such as mobile phone problems caused by self-flashing, it may also affect the repair, so we do not recommend that you flash your phone by yourself.

If the mobile phone cannot be used normally due to system failure or causes problems with the mobile phone after flashing the phone by itself, it is recommended that you send the machine to the after-sales service center for the help of the engineer to check and deal with it.

Supplements: 1. Some third-party** or the flashing package provided by the forum, due to the non-Samsung official original system, there are instability and compatibility problems, if you are not a professional, it is not recommended to try to flash the machine.

2. In order to make users have a better experience, Samsung mobile phones provide system update services, if there is a new firmware, there will be a push update notification. You can do the following: Settings - (About Phone About Device) - System Update - Automatic Update - On.

Same as Samsung,I'm from the Galaxy series.,Brush the machine and then brush the treasure to find it.。 You can also go and see if there is one you need.

1. Open, there is a box to select your device model in the upper right corner, as shown in the figure below, first select the specific model of your mobile phone:

2. For example, the Samsung GT-i9500 we selected, after selection, it will automatically go to the ROM page of 9500, which contains almost all the ROMs released in all countries and regions of this model, as shown in the figure below, which lists the device name, model, region, ROM version, system version, new time of changing the rental pants, changelist information, you can ** the corresponding ROM according to your own needs, click on the back "**" to connect.

3. Click **Connect to open the following page, click on the red box in the picture to connect [Stock Firmware(Hotfile Mirror)] to **! Of course, this is for foreign and ** access users,Many places in China can't open the network disk connection,What should I do? Let's take a look!

<>4、Domestic users click [Stock Firmware (Hotfile Mirror)], the blocked place will not be opened: the web page cannot be displayed, no need to worry, replace the original http with https in the address bar to open it, is it very simple? Then let's slowly lower the type and load it!!

1. Open, there is a box to select your device model in the upper right corner, as shown in the figure below, first select the specific model of your mobile phone:

You can go to Samsung's official website.

Look for it on Jifeng.com, of course, the official has to go to the official website, go to the official website to find your mobile phone, there is technical support. Or the phone is not rooted before the air upgrade.

You can make an "appointment to shop" repair application on Samsung's official website to enjoy priority repair service.

After the appointment is successful, please bring your machine, invoice and warranty card to the service center where you made the appointment on time.

This thing is not easy to find, you have to find a professional person to flash the machine.

The official flashing package is not good, and the brushing laser system is perfectly solved.

Here's how to do it:

1. Open, there is a box to select your device model in the upper right corner, as shown in the figure below, first select the specific model of your mobile phone:

3. Domestic users click [Stock Firmware(Hotfile Mirror)], and the blocked place will not be opened: the web page cannot be displayed, so don't worry, replace the original http with https in the address bar to open it.

Samsung's official website doesn't mention it.

BAI provides a software package for flashing.

If you need to flash your phone, you have to go to Samsung's service point to go to the DAO line.

Extended Materials. Inner: ROM is the abbreviation of ROM Image (read-only memory capacity image), which is often used in the circle of mobile phone customization system players. Generally, the process of flashing a mobile phone is the process of writing a read-only memory image (ROM image) to a read-only memory (ROM).

Common ROM images are in IMG, ZIP and other formats, the former is usually flashed in by a fastboot program through a data cable (wire brush), and the latter is usually flashed in from SD in recovery mode (card brush), so IMG images are also called wire flash packets, and zip images are also called card flash packets.

1. Samsung's official website does not provide relevant information such as mobile phone flashing (fastboot mode factory** engineering mode ROM baseband recovery parallel import modification Chinese).

2. Due to the risk of allowing you to flash the machine and write to the system, if there is a problem with the mobile phone system, it is recommended to bring the repair card, purchase invoice and mobile phone to the nearest Samsung Electronics Service Center for engineers to solve the problem.

3. It is not recommended to operate by yourself to avoid unnecessary losses.

The official ROM of Samsung mobile phones is generally not released on the official website, you can go to the third party ** to see.

There are still a lot of flash bags in the ROM sky.,And the ROM bag is relatively pure.,Basically, you can find what you want.。

The official ones are all upgrades, and the next kies mobile phone can be connected to the computer on the official website, and the official website can be upgraded if there is an upgrade. Or there is a system upgrade in the mobile phone about the mobile phone option, and you can upgrade it directly with wifi.

1. Samsung's official website does not provide relevant information such as mobile phone flashing (fastboot mode factory** engineering mode ROM baseband recovery parallel import modification Chinese).

2. Due to the risk of flashing the machine and writing the system by yourself, if there is a problem with the mobile phone system, it is recommended to bring the repair card, purchase invoice and mobile phone to the nearest Samsung Electronics Service Center for engineers to solve the problem.

3. It is not recommended to operate by yourself to avoid unnecessary losses.

1. Open, there is a box to select your device model in the upper right corner, as shown in the figure below, first select the specific model of your mobile phone:

If it's a smart phone, you can also use the official website, and there are other ** to Jifeng.com, and now the flashing machine is very fake, and you can operate it yourself.

1.Upgrade via FOTA: Settings in the phone - About the device - System update - Update, the following is the upgrade method of Fota on Samsung's official website for your reference:

2.Connect to a computer through KIES to update the firmware, the following is how to upgrade the KIES software on Samsung's official website for your reference:

Welcome to Samsung's Digital Services platform.

If you want to flash a third-party ROM, you need to flash a third-party REC first,The official REC can't flash the third-party firmware,The details of different models are different methods,You can go to the corresponding model section of the major mobile phone forums to find tutorials。

The volume button moves the cursor up and down, the power button confirms the selection, and selects wipe data factory reset and wipe cache partition respectively to select yes, these two operations are called double clearing.

After brushing, select the first reboot system now and restart the phone, the first new system entry is relatively slow, wait patiently.

Hello and welcome to the Samsung Digital Services platform.