Why can t my Xiaomi phone use mono bluetooth headphones to listen to songs? 5

The next software in the Douban folder supermonobtpro,Translated can be called super Bluetooth mono。

The function is very simple but very powerful, that is, it can make your mono Bluetooth headphones able to listen**.

This is the software interface, after the installation is opened for the first time, the black screen will be connected to the network for verification, just wait patiently.

The software is very simple, two buttons with three options, and two buttons are open and closed, which is very simple and not explained.

The three options are: 1. Automatically turn on the software function when Bluetooth is connected, 2. Automatically turn on the software function when ** is turned on, 3. Automatically adjust the ** volume to the maximum when the software function is turned on.

Don't worry after the software is installed, set the permissions first, and turn on the authorization management.

Find our software and click on it.

You can see that the permission of the second itemMIUI is prohibited by default,The reason is here,The principle of the software is to deceive it into thinking that the act of putting ** is on the phone,And then in the Bluetooth headset**,So this permission is needed。

Click the second item, select Allow, and click OK.

Then you can see that the second permission becomes allowed. Then turn it off.

Once you're set up, connect your own mono headphones.

If there is no sound, it's OK to punch **.

Up** Rice Noodles Trend Pavilion Store accessories are readily available!

If the mobile phone recognizes the Bluetooth headset as a mono headset, it will only transmit the call voice to the headset through Bluetooth communication. Multi** sound system does not transmit.

Guess! Look at the master axe.

You can go in and connect to set Bluetooth settings to connect device settings, otherwise it will be a problem with the headphones.

Xiaomi Bluetooth headphones have a no sound workaround:

1、Not set up,Xiaomi Bluetooth headset is a single ear with sound by default,At this time, you can set up binaural sound according to the Xiaomi earphone manual,It can be solved in less than ten minutes。

2. If there is a problem after using it for a period of time, the best way is to reset the Bluetooth headset, turn off and press and hold for 20 seconds, wait until the second red and white lights flash alternately, then put it back in the box, and then pick it up at the same time, you can automatically connect it in series.

3. If the above methods can't be solved, it is a problem with the earphones themselves, you can contact the after-sales service, or take it for maintenance.

Bluetooth headphones are hands-free headphones that apply Bluetooth technology, which allows users to use the headphones in various ways without the need for wires. Since the advent of Bluetooth headsets, it has been a good tool for mobile business people to improve efficiency, it has mono, stereo, true wireless three types, including HSP, HFP, A2DP three specifications. Bluetooth technology is not only used in computers, but also in many electronic devices such as mobile phones, digital cameras, video cameras, printers, fax machines, home appliances and so on, which can be used to achieve wireless communication without having to drag a tail (connecting cable).

With the popularization of Bluetooth technology, home decoration is no longer troubled by the wiring of electrical appliances; When using home appliances, you don't have to worry about a lot of remote controls, a mobile phone or a car key can do everything; When you are away from home, the company's work arrangement and the picture of your relatives at home can be obtained anytime and anywhere; There is no need to queue up for punching in and paying fees, passing near the payment point, and you can easily complete the wide application of Bluetooth technology without entering the door, which will make our lives extremely easy.

You can turn on the Internet connection in your phone. If it still doesn't need to be sent for repair.

Tools Raw materials.

Mobile: Xiaomi.

Headphones: Edifier TWS1 Classic.

Method steps.

1. First of all, in order to solve the problem of what to do if there is sound on only one side of the Bluetooth headset, we need to open the settings of our mobile phone desktop and click on other networks and connections.

2. We click the audio button of the mobile phone and turn on the sound of **.

3. On the Bluetooth interface of the mobile phone, then click the small dot behind the Bluetooth headset to enter the setting interface of the headset.

4. The last thing you need to do is to set up the Bluetooth headset interface and turn on the audio. After connecting to Bluetooth, keep the two ears connected, if there is still no sound on one side, it means that the earphones may be broken.

Take out the two earbuds from the charging case at the same time, wait for 2-3 seconds for the earbuds to automatically turn on in series, and when the white light in the right ear flashes slowly, turn on the Bluetooth of the device and search for "mi airdots basic r" and click to complete the connection.

If the connection fails, put the earbuds back into the charging case and repeat the above connection operation. After the first connection, the earbuds can be automatically connected back to the last paired device when powered on, if the automatic connection fails, please select the manual connection operation mode.

The reason for this problem is that mono audio is set, and you can just tune it back as follows:

2. Secondly, after completing the above steps, swipe down on the settings interface as shown in the figure below, and then enter the next step.

3. Then, after completing the above steps, select the "Smart Assist" option as shown in the image below, and then proceed to the next step.

4. Then, after completing the above steps, click on the "Accessibility" option as shown in the image below and proceed to the next step.

5. Finally, after completing the above steps, swipe down on the accessibility interface to find the mono audio, and turn off the switch at the back, as shown in the figure below. In this way, the problem is solved.

Answer: Hello, very happy to answer for you, 1. Take the earphones out of the case and press and hold them to turn them off, press and hold the multi-function buttons of the two earphones for about 15 seconds, and release them after the second red and white lights flash three times alternately, and the earphone reset is completed at this time.

2. Press and hold the button for about 1 second to turn on the dual earphones. (The boot interval needs to be less than 20 seconds), the indicator light flashes double at the same time, about 2 3 seconds after the series success, the left earphone indicator light goes off after the series is successful, and the right earphone indicator light flashes slowly with white light, at this time you can use the mobile phone to search and pair.

Is there anything else I can do to help you?

Please move your fingers to give a thumbs up, thank you Warmly remind you to pay attention to personal protection during the epidemic, and wish you a happy life!

Asked a question tried.

2. Bluetooth connection failure:This is an accidental failure with a very small probability of occurring, and you only need to disconnect the Bluetooth connection and then reconnect it.

3. The Bluetooth headset has been powered, while the other one is running out of power, there will be a situation where it rings while not ringing, and you only need to fully charge both Bluetooth headphones.

4. Bluetooth headset motherboard failure:If there is a problem such as poor contact, this is a hardware failure and needs to be repaired at the after-sales center.

Precautions for the use of Bluetooth headsets.

The headphones and phone should be worn in the same direction as the body as much as possible.

Avoid leaving your phone in your bag. In general, canvas bags will create less hindrance, and leather bags or briefcases will create more obstacles.

If you encounter similar interference, you can delete the Bluetooth device in the phone, turn off the phone, restart, and then pair it with the Bluetooth headset again.

The biggest precaution for using Bluetooth headsets is the charging time of the built-in battery of Bluetooth headsets, the charging time of new Bluetooth headsets is between 2-3 hours, and the charging time of used headphones is better between 1-2 hours.

The above content refers to People's Daily Online-Bluetooth headset as little as possible.

Hello! 1. Check whether it is a problem with the audio source of the mobile phone, whether it is only a mono output, and after ruling it out, it may be a problem with the audio itself. 2. Change the headphones or change a**Waiterhole** to see if it's the same.

3. Turn off the connection between the phone and the earphone, and delete the Bluetooth earphone in the Bluetooth list of the phone. 4. Turn on the earbuds and after the Bluetooth matching is successful, press the earphones on both sides a few times until the two earphones send out a connection prompt tone. 5. If it cannot be solved, it may be caused by damage to the Bluetooth headset and sent to a professional maintenance point for repair.

Hope it helps!

It may be that there is an error in the Bluetooth pairing, or the signal is disconnected due to interference, just re-pair and it can be used normally.

1. Put the earbuds back into the charging case, then close the lid again, and then take them out again after a few minutes to try, which can generally solve the problem.

2. You can turn off the mobile phone and restart it, and then turn the mobile phone back on Bluetooth to connect.

3. Turn on the Bluetooth of the mobile phone, find the name of the Xiaomi Bluetooth earphone, select unpairing, and then repeat the pairing operation to solve the problem.

4. If the above methods cannot solve the problem, it is recommended to contact the after-sales service directly to solve the problem.

There is no sound on the Bluetooth headset connection, which is generally caused by the following reasons.

Second, the Bluetooth headset has a low battery. You can charge the Bluetooth headset for a period of time before turning on the connection.

3. The volume of the mobile phone has been adjusted to the lowest. You can make sure that the Bluetooth headset is correctly connected to the phone, and turn up the volume of the phone**.

Fourth, the system is incompatible. It can be replaced with other Bluetooth headsets.